Just got mine yesterday, this is one badass little rig , let's hope they hold up
Eleaf Istick
- Thread starter AnsonJames
- Start date
- th_trl_thread_readers 0
-
- Tags
- eleaf istick istick
- Status
[QUNOTE=STEAM_P0WERED;14296260]Here's an atomic, it dose not sit flush but dose not hang over that much. This one is by EHPro.
Thanks, S_P! That's just what I wanted to see. I could live with that. Too bad it doesnt sit flush, though. Have you tried vaping it?
Funny how the Atomic looks huge on the istick, huh?
BTW, I like your wrap.[/QUOTE]
Thanks! I did throw a build on it last night but it came out at .95 oHm's and the istick would not fire it. As far as the 510 pin, it needs to be spring loaded, in fact the 510 on the iStick is the only thing I don't like. The threads are crunchy, the pin dose not adjust and if the 510 could be moved to the center of the deivice, I would be alright with that.
They would have to make the Body of the iStick about .500" Longer to do that.
When you see How Much is Crammed into the Interior Space, you would see that 510 has to be where it is. Put a 18650 Battery on the Curved side for Reference.
You haven't lived until you've had a can of Diet Coke freeze and then explode in your vehicle! In the low 40's here this morning. Looking forward to visiting my sister in Fla. later this month!
Well. I done it. Ordered one for my girlfriend from VapeNW, and threw a Fogger v4.1 in for myself (and some 30 gauge from Temco!).
Now that she'll have more than an ego twist, I can feel better in the His and Hers thread
Now that she'll have more than an ego twist, I can feel better in the His and Hers thread
So, for the ladies re: this "pouch" thing ...
A double eyeglass case and lanyard from Vera Bradley would work nicely. I have several double eyeglass cases and popped my istick in there like it was made for it. Whip stitch the key ring on the lanyard to the top of the eyeglass case with some embroidery thread and BOOM! Stylish and functional.
A double eyeglass case and lanyard from Vera Bradley would work nicely. I have several double eyeglass cases and popped my istick in there like it was made for it. Whip stitch the key ring on the lanyard to the top of the eyeglass case with some embroidery thread and BOOM! Stylish and functional.
It has been So Hot for so Long, I have to look at Old Ski Trip/Mountain Climbing Photos to remember what Cold Weather was like.
Irvine Hourly Weather - AccuWeather Forecast for CA 92604
Did you contact USPS customer service online? You can click on contact us when you are looking at the tracking and fill the form out from there. I have had to do that twice in the last few months. Never did get a response but miraculously the package in question did start moving by the next day
I had a package sit in Tampa FL for 5 days just a few months back.
I talked to them yesterday and they said to call them back if I don't have it tomorrow. We'll see I guess, but there's still no updates so I'm not holding my breath.
Weather for my area. We are into Santa Ana wind time of year, so more hot weather to go yet.
Weather in San Bernardino - AccuWeather Forecast for CA 92401
Weather in San Bernardino - AccuWeather Forecast for CA 92401
Thanks wow that Istick is small. My wife will love it. Will have it Monday or Tuesday.
I'm having a difficult time keeping the honeymoon going with my iSticks. I've been using Naughty minis on them and just cannot keep juice out of my mouth (stop ... be nice gutter brains ... you know who you are ).
I've done everything imaginable to the mini including buying the "T" tanks to use because I heard it didn't have the vacuum issues the standard tank does. (BTW, is does not have vacuum issues. Much easier to get open and still no leaks.) I've exchanged coils several times with BVCs I got from different vendors (all authentic), volts/watts up and down, tighten, loosen coils - mindful of gaskets, tighten, loosen tank, clean out post and drip tip ... ad nauseum. Both tanks on both iSticks spit constantly whether I'm vaping cooler or warmer. I've got a blister on my tongue where it got me yesterday. Now mind you these tanks do not spit like this on my EVOD vv batts or my MVP2. I just cannot figure it out.
I have used the EVOD tanks with the 510 adapter on both iSticks and the problem is much decreased, but not entirely gone. I'm going through juice and coils like Sherman went through Atlanta so this is rediculous. I put the EVODS tanks back on the EVOD batts today just to get a break from the aggravation. Any thoughts?
ETA: Air holes on both tanks wide open too. Closing them off any at all makes it even worse.
). I've done everything imaginable to the mini including buying the "T" tanks to use because I heard it didn't have the vacuum issues the standard tank does. (BTW, is does not have vacuum issues. Much easier to get open and still no leaks.) I've exchanged coils several times with BVCs I got from different vendors (all authentic), volts/watts up and down, tighten, loosen coils - mindful of gaskets, tighten, loosen tank, clean out post and drip tip ... ad nauseum. Both tanks on both iSticks spit constantly whether I'm vaping cooler or warmer. I've got a blister on my tongue where it got me yesterday. Now mind you these tanks do not spit like this on my EVOD vv batts or my MVP2. I just cannot figure it out.
I have used the EVOD tanks with the 510 adapter on both iSticks and the problem is much decreased, but not entirely gone. I'm going through juice and coils like Sherman went through Atlanta so this is rediculous. I put the EVODS tanks back on the EVOD batts today just to get a break from the aggravation. Any thoughts?
ETA: Air holes on both tanks wide open too. Closing them off any at all makes it even worse.
Last edited:
That is why I think the Istick would be perfect if it had an internal battery that could be replaced by the consumer. Keep the mini usb to charge. If for some reason it won't charge replace the battery. I doubt you will see this but it's something to hope for. Shark DNA also has the RNA which means you can change internal battery but I see the unit is larger than the DNA.
I was having a major gurgling/spitting issue with my naughty, on both my vv3 and iStick, but through trial and error discovered the right amount of tightening down the coil into the base unit. The issue for me was that it was flooding the base unit, which meant the coil couldn't absorb more juice, so it backed into the air tube. Between that and tightening the tank to barely finger-tight then backing it off 1/4 to 1/2 turn gurgle, spits and the vacuum issue are a thing of the past for me.I'm having a difficult time keeping the honeymoon going with my iSticks. I've been using Naughty minis on them and just cannot keep juice out of my mouth (stop ... be nice gutter brains ... you know who you are
I've done everything imaginable to the mini including buying the "T" tanks to use because I heard it didn't have the vacuum issues the standard tank does. (BTW, is does not have vacuum issues. Much easier to get open and still no leaks.) I've exchanged coils several times with BVCs I got from different vendors (all authentic), volts/watts up and down, tighten, loosen coils - mindful of gaskets, tighten, loosen tank, clean out post and drip tip ... ad nauseum. Both tanks on both iSticks spit constantly whether I'm vaping cooler or warmer. I've got a blister on my tongue where it got me yesterday. Now mind you these tanks do not spit like this on my EVOD vv batts or my MVP2. I just cannot figure it out.
I have used the EVOD tanks with the 510 adapter on both iSticks and the problem is much decreased, but not entirely gone. I'm going through juice and coils like Sherman went through Atlanta so this is rediculous. I put the EVODS tanks back on the EVOD batts today just to get a break from the aggravation. Any thoughts?
But as said, I was having the problem on all my vv/vw devices, so don't know if this will help you.
Sent from my Nexus 5 using Tapatalk
Speaking for myself? I am lazy - I want some kind of 'holder' that I can clip a lanyard to, and be able to use the device without having to remove it from the holder.
I'm having a difficult time keeping the honeymoon going with my iSticks. I've been using Naughty minis on them and just cannot keep juice out of my mouth (stop ... be nice gutter brains ... you know who you are
I've done everything imaginable to the mini including buying the "T" tanks to use because I heard it didn't have the vacuum issues the standard tank does. (BTW, is does not have vacuum issues. Much easier to get open and still no leaks.) I've exchanged coils several times with BVCs I got from different vendors (all authentic), volts/watts up and down, tighten, loosen coils - mindful of gaskets, tighten, loosen tank, clean out post and drip tip ... ad nauseum. Both tanks on both iSticks spit constantly whether I'm vaping cooler or warmer. I've got a blister on my tongue where it got me yesterday. Now mind you these tanks do not spit like this on my EVOD vv batts or my MVP2. I just cannot figure it out.
I have used the EVOD tanks with the 510 adapter on both iSticks and the problem is much decreased, but not entirely gone. I'm going through juice and coils like Sherman went through Atlanta so this is rediculous. I put the EVODS tanks back on the EVOD batts today just to get a break from the aggravation. Any thoughts?
ETA: Air holes on both tanks wide open too. Closing them off any at all makes it even worse.
Too much suction........I'm using Aero and Pro tanks with mine and no prob
I have my AFC set at halfway (hate Nauti's)- Status
