My coils read exactly the same on my 50's and 30. They also perform identical at the same power. Maybe something happened with the tank.
Eleaf Istick
- Thread starter AnsonJames
- Start date
- th_trl_thread_readers 0
-
- Tags
- eleaf istick istick
- Status
My coils read exactly the same on my 50's and 30. They also perform identical at the same power. Maybe something happened with the tank.
Mine reads .1 higher than my 30. The rba base being loose caused my ohms to jump crazy, now its steady. But after looking one side of my wick looks clean and the other side which I notice bubbles come from is pretty dark.
Last edited:
Just making a quick run by. Not sure if someone has posted this yet, but the Smart-30 has hit FastTech. They have gold. 
Found 5 smart-30 at FastTech - Worldwide Free Shipping
Found 5 smart-30 at FastTech - Worldwide Free Shipping
I don't think the difference can be called a whole tenth of an ohm. I just did this little test
1.5 ohm coil---Black 30w 1.5, Silver 50w 1.5, Black 50w 1.6
1.5 ohm coil---Black 30w 1.5, Silver 50w 1.6, Black 50w 1.5
2.0 ohm coil---Black 30w 1.9, Silver 50w 2.0, Black 50w 1.9
1.5 ohm coil---Black 30w 1.6, Silver 50w 1.6, Black 50w 1.6
0.9 ohm coil---Black 30w 0.9, Silver 50w 0.9, Black 50w 0.9
Because of the results on coils number 1,2 and 4, I think the coils are closer to 1.6 ohms than 1.5 ohms such as 1.59 or so. The silver read high on one coil while it was the black that read high on another. Also I got a 1.5 reading once on the Silver after trying it again with the same coil that read 1.6 the first time. that leads me to believe that if the coils were made closer to specs all three of the isticks would read the specified rating.
I'm no RBA pro -- My novice advice is to replace the coil. The ohm's jumping around is a sure sign of something --- but heck if I can remember what. I see, you may have debugged PART of the problem, but not all. Perhaps you jossled the coil or there is a screw loose----that looks like a hot spot and that's not so great either.
Last edited:
My wife says that's the cause of a lot of my problems......
Thanks. I plan on changing out the coil and see what's making it do that. Other than that it vapes great. Def need to drop my 10mg nic though.
so i took a leap and bought a sleeve for my 30w.....they said it was only for the 20w....but after reading in here about everyone saying that they should fit, i bought one (these i think are different than most the other sleeves i've seen) and it came in today and it's perfect....the exact color of the wrap i had been using 
now it was a bit of a pain to get the thing on.....and it's just a tad bit too small around...so part of the sides around the display and button shows just a hair....
mines silver but it's not too bad....though it may annoy me enough that i might put a bit of the original wrap on there to make it blend in slightly ocd......
dino at madtown vapor he knows i love orange so he got a set that came with orange
ELEAF ISTICK SLEEVES - MADTOWN VAPOR $4.99
now it was a bit of a pain to get the thing on.....and it's just a tad bit too small around...so part of the sides around the display and button shows just a hair....
mines silver but it's not too bad....though it may annoy me enough that i might put a bit of the original wrap on there to make it blend in
slightly ocd...... dino at madtown vapor he knows i love orange so he got a set that came with orange ELEAF ISTICK SLEEVES - MADTOWN VAPOR $4.99
Does anyone make a sleeve for the 30W-ers?
If someone does, I would surely buy a few.
Have seen wraps (not into wraps), but no sleeves.
Sweet vapes has them. They cover everything but the screen. They are nice.
http://sweet-vapes.com/apvs/eleaf/eleaf-istick-20w-30w-silicone-case.html
Last edited:
i'm loving this (well atm anyway) ordered a protank mini with the adjustable airflow and the 2ohm vertical coils
it's almost enough to make me love tanks again.....my eternity's might be benched for awhile
still trying to find a happy medium....two open holes is a bit airy one hole is a bit tight
it's almost enough to make me love tanks again.....my eternity's might be benched for awhile
still trying to find a happy medium....two open holes is a bit airy one hole is a bit tight
I posted this elsewhere, but this looks like the right place for it...
A ha! I fixed my iStick! The insulator under the center pin of the 510 connector had degraded. I grabbed a teensy o-ring from one of my tanks, and stretched it around and under the center pin using a couple 1mm screwdrivers. Attys tighten down, and no short or odd ohm readings any more.
A ha! I fixed my iStick! The insulator under the center pin of the 510 connector had degraded. I grabbed a teensy o-ring from one of my tanks, and stretched it around and under the center pin using a couple 1mm screwdrivers. Attys tighten down, and no short or odd ohm readings any more.
My black beauty should ship soon. Wonder if there are any wraps for it. I'd love a carbon fiber wrap.
Just felt the need to share my family portrait:
Sent from my iPhone using Tapatalk
The more I look at this, the more I just think it's a WONDERFUL shot, pmom!! I love it! You really made those sing.
They're FAR from practical (said the Bling Lover), and occasionally they're annoying as hell. But the price we pay to look beautiful..... ;0
ins, the sleeves I believe are identical for the 20s and the 30s. I got a bunch of them for a dollar and change and put them on a few 'Sticks, including the 30.
People seemed not to want to order from the site I used due to a potential delay in shipping. I had mine in just over a week. To me, worth it.
They're FAR from practical (said the Bling Lover), and occasionally they're annoying as hell. But the price we pay to look beautiful..... ;0
ins, the sleeves I believe are identical for the 20s and the 30s. I got a bunch of them for a dollar and change and put them on a few 'Sticks, including the 30.
People seemed not to want to order from the site I used due to a potential delay in shipping. I had mine in just over a week. To me, worth it.
Kool-Kat....looks nice....for a buck and some change?...may I ask where you bought the sleeves, same link as prior post?------
I posted it long ago, but for whatever reason, it went fallow. One moment please......- Status
