ePipeMods Fully Custom Made Wood E-Pipes - Part 2

[BluSwatch]

Matt - I got one of those for my friend since it has the skirt, and wouldn't need an extra cone.
It's a nifty idea they finally came up with.

 

[tomas]

My Gandalf pipe dropped down to the floor Wood is broken at the bottom to 3 pieces, wobbling connector. I'll try to repair it,but it'll never be the same like yesterday

 

[Phangtonpower]

Maybe you can use tight bond. It's what they use for guitar repair when dealing with wood.

 

[MistBusterMatt]

My Gandalf pipe dropped down to the floor Wood is broken at the bottom to 3 pieces, wobbling connector. I'll try to repair it,but it'll never be the same like yesterday

I feel a beetles song coming on... Yesterday, all my troubles seemed so far away...

Send it back and we'll see what we can do with it. As long as all the pieces are there we should be able to fixe it.
Email Katie@epipemods.com for return instructions.

 

[emonty]

Still digging my Briar pipe Big Time, it grows on me!!

 

[tomas]

I've found some time in the evening and fortunately all 3 pieces sits nicely in place. It's glued and fixed for overnight hardening. I'll post picture after repair tommorow. Thanks for your offer for help Matt, but shipping the pipe to US and back to Prague will take 4 weeks. I hope I fixed it well.

 

[nikko661]

My poor cats only have 6 lives remaining after batting my epipemouse to the patio concrete 3 times. The Hobbit Hole has survived like a champ, but just ordered a backup pipe to avoid total despair if anything tragic happens. I suppose I'll then have to backup the backup pipe.....

Also got up the nerve to try Long Bottom Leaf pipe sauce after vaping dessert treats and candy for my 4 months of vaping experience....wow...now it not only feels as comfy as a pipe, but tastes it too. Great sauce to go with great pipes...think I'll pick up a sampler soon and see what else I've been missing.

Here is the Hobbit Hole with a smoked Mini Vivi Nova...loving its look! And performing well with the LBL sauce!

 

[Phaedrus]

Wow, all these pipes look so nice. I am new to vaping but am tiring of a ego twist. Do you think a pipe would be ok for a new vaper?

 

[Fesso]

Wow, all these pipes look so nice. I am new to vaping but am tiring of a ego twist. Do you think a pipe would be ok for a new vaper?

I started with an eGo twist and moved very quickly(2 days) to ordering an epipemod because I prefer the look and feel of a pipe in my hand rather then a tube. An eGo twist is actually more complicated (you can change the voltage) then an epipemod. They are both really just batteries. The twist is a battery and a pipe holds a battery. It gets complicated with the different cartomizers, atomizers, clearomizers that you screw into the battery. The epipemods can take just about any thing you want to screw onto it.
What ever you are using on top of your eGo twist will work on an epipemod.

 

[cubfanthad]

Matt, the eGo connector on my Mjolnir has developed a slight wiggle. Can I put a drop of glue on it somewhere to sure it up?

 

[MistBusterMatt]

Matt, the eGo connector on my Mjolnir has developed a slight wiggle. Can I put a drop of glue on it somewhere to sure it up?

A little super glue on the inside should tighten it down.
If you need to you can send it back.

 

[nikko661]

Mail call! Thanks again Matt! I ordered this as a backup pipe but it so beautiful...I just can't call it that. It's pipe number two for me, the Stealth Shroom in Cocobolo. The Rootbeer Tip is also from Matt's website, and does look great with these pipes. I also picked up a third pipe last month for a friend, who instantly converted to the pipe, and has never vaped happier.

 

[millertime660]

I am loving all these pipes and think i might be ready to pull the trigger. I dont really see anything on the site right now that jumps out at me but hopefully there will be soon? How often do new pipes make it on the site?

 

[Fesso]

I am loving all these pipes and think i might be ready to pull the trigger. I dont really see anything on the site right now that jumps out at me but hopefully there will be soon? How often do new pipes make it on the site?

Usually Friday afternoons. There is usually a preview of upcoming pipes on their Facebook page.
https://www.facebook.com/EPipeMods?fref=ts

 

[emonty]

I hate!!! FB but Love!!!! e-pipes!

 

[millertime660]

Usually Friday afternoons. There is usually a preview of upcoming pipes on their Facebook page.
https://www.facebook.com/EPipeMods?fref=ts

Thanks so much.... eagerly awaiting friday ahhahah

 

[skigro]

Well finally gave in and ordered an 8" churchwarden stem. I was thinking it would be a little long but go big or go home. Lol.

 

[MistBusterMatt]

Thanks so much.... eagerly awaiting friday ahhahah

Unfortunately we are still wrapping up our new year shop reset and stem production, so no pipes this Friday.
Next Friday there may be a few that go up. The following Friday things should be back to normal as far as production.
Sorry for the delays guys, but this stuff had to be done.

 

[millertime660]

Unfortunately we are still wrapping up our new year shop reset and stem production, so no pipes this Friday.
Next Friday there may be a few that go up. The following Friday things should be back to normal as far as production.
Sorry for the delays guys, but this stuff had to be done.

awww shucks... its like waiting for christmas, again.

 

[Dusty_D]

Hey folks, just got an order of Pipesauce in, LBL, Oak Barrel Cider and Grandpas cough medicine. What voltage/wattages are these good at, and with what carto/geny combination?! Trying to figure out if they like a higher heat under them, or a cooler vape preferred?