I bought a new laptop today
(Sorry... maybe it's not the right time but i couldn't handle it)
Esterigon official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Ok . Yes , good night guys . I will try to sleep as well . Can't stop laughing
Ok Now that I caught up reading here’s what I like to say. We have many vapors that like different things. In respect to not just Imeo but all the modder’s that are always being challenged, always being pushed to the limits of creating something that will make there current and new customers happy is a very very very difficult thing.
As eloquently Captain Steve put it I must quote, “As far as design concept I believe the creator has to walk a very fine line. Does he design a top hitting mod with less compatibility with all types of atties or does he design a mod which is fully compatible with everything out there? Does he place form factor higher on his design priorities over let’s say larger battery capacity? Does he sacrifice some voltage drop for fire button convenience and ease of use?”
With that said getting back to esterigon and these are some of my opinions. The mod is the best for any new vapor that is looking to get into mechanical mods. Not that it’s not good for average or more experience vapors. The reason why I say its excellent for new vapors thinking of mechanical is because of the following many reasons.
1)Set a battery and forget it! Let’s look at this. GREAT feature we don’t have to adjust anything. You know how many HIGH end mechanical mods (copper, brass etc) not going to name them. That we have to adjust if it’s a bottom cap, or top cap to stop battery from rattling. As well as manual adjusting it do to different atomizer.
2)The 510 auto adjust cap!!! FORGETABOUTIT!!! No more adjusting the rba 510 connector. No need to extend it to make contact. It’s AUTOMATIC. This takes away from us from manually removing top cap to adjust atty flushness.
3)Switch compartment OOOOOFAAAAAAAAAAA!!!! The button feels like you are not pressing anything. Many mods you have to press hard or have a deep press. This is very very light and smooth throw.
4)Contacts in switch. Holy Cinnamon tities. This is by far genius. You have two springs constant force on brass. Brass fully contacts to 510 cap to battery compartment and button. This three way action design is Genius not just for hitting power it gives you but the ease of cleaning the contacts for continues long lasting hits. Using a micro towel or some never dull does the trick. As well as what Imeo showed you can easily turn the position of the contacts and you get a new clean layer. AMAZING. On other mechs I have to remove all contacts and clean them they don’t possess this ability.
5)Locking switch, I love the abilty of locking the mod with a small ring and not a big ring. Very simple and easy to do. Very safe to leave mod flat on table and not worry button will be pressed against table.
6)Vent holes for battery. Many mechanical mods don’t have enough venting holes for battery and this is very very important if you sub ohm since battery can get hot.
7)Esterigon has a large vent holes so if you like to vape on a 306, 510 dripper or using a dripper with unsealed 510 it will maximize the potential of the vape.
8)Esterigon feels very light and not heavy like many other mechanicals.
9)Esterigon can be used in all sizes of 18650 batteries and still auto adjusts to fit while keeping atty flush on cap.
10)I find it to be one of the hardest hitting mods compared to stainless steel since it is stainless steel. To be fair It can’t be compared to brass or copper do to different conductivity in those metals.
Well that’s all for now tomorrow I will be recording Imeo for VapeTV so if anyone has any question for him please post it in following link for me to ask him. Bishopheals THERE CAN BE ONLY ONE!!! » The Original Electronic Cigarette Social Media Network
Free to register then you can add your comments in that post. Again guys these are my opinions on esterigon many can agree and can disagree.
Ok With that LIVE HARD & VAPE HARD!!!!
As eloquently Captain Steve put it I must quote, “As far as design concept I believe the creator has to walk a very fine line. Does he design a top hitting mod with less compatibility with all types of atties or does he design a mod which is fully compatible with everything out there? Does he place form factor higher on his design priorities over let’s say larger battery capacity? Does he sacrifice some voltage drop for fire button convenience and ease of use?”
With that said getting back to esterigon and these are some of my opinions. The mod is the best for any new vapor that is looking to get into mechanical mods. Not that it’s not good for average or more experience vapors. The reason why I say its excellent for new vapors thinking of mechanical is because of the following many reasons.
1)Set a battery and forget it! Let’s look at this. GREAT feature we don’t have to adjust anything. You know how many HIGH end mechanical mods (copper, brass etc) not going to name them. That we have to adjust if it’s a bottom cap, or top cap to stop battery from rattling. As well as manual adjusting it do to different atomizer.
2)The 510 auto adjust cap!!! FORGETABOUTIT!!! No more adjusting the rba 510 connector. No need to extend it to make contact. It’s AUTOMATIC. This takes away from us from manually removing top cap to adjust atty flushness.
3)Switch compartment OOOOOFAAAAAAAAAAA!!!! The button feels like you are not pressing anything. Many mods you have to press hard or have a deep press. This is very very light and smooth throw.
4)Contacts in switch. Holy Cinnamon tities. This is by far genius. You have two springs constant force on brass. Brass fully contacts to 510 cap to battery compartment and button. This three way action design is Genius not just for hitting power it gives you but the ease of cleaning the contacts for continues long lasting hits. Using a micro towel or some never dull does the trick. As well as what Imeo showed you can easily turn the position of the contacts and you get a new clean layer. AMAZING. On other mechs I have to remove all contacts and clean them they don’t possess this ability.
5)Locking switch, I love the abilty of locking the mod with a small ring and not a big ring. Very simple and easy to do. Very safe to leave mod flat on table and not worry button will be pressed against table.
6)Vent holes for battery. Many mechanical mods don’t have enough venting holes for battery and this is very very important if you sub ohm since battery can get hot.
7)Esterigon has a large vent holes so if you like to vape on a 306, 510 dripper or using a dripper with unsealed 510 it will maximize the potential of the vape.
8)Esterigon feels very light and not heavy like many other mechanicals.
9)Esterigon can be used in all sizes of 18650 batteries and still auto adjusts to fit while keeping atty flush on cap.
10)I find it to be one of the hardest hitting mods compared to stainless steel since it is stainless steel. To be fair It can’t be compared to brass or copper do to different conductivity in those metals.
Well that’s all for now tomorrow I will be recording Imeo for VapeTV so if anyone has any question for him please post it in following link for me to ask him. Bishopheals THERE CAN BE ONLY ONE!!! » The Original Electronic Cigarette Social Media Network
Free to register then you can add your comments in that post. Again guys these are my opinions on esterigon many can agree and can disagree.
Ok With that LIVE HARD & VAPE HARD!!!!
Just cleaning up the inbox and I see Rob's notification on Esterigon release... Oh SHHHHHHHH... day late! (and a dollar short)... So I head on over to FV and lo&behold IN STOCK
, add to cart with all tubes... don't forget the priority shipping, after all been waiting for months.
Thanks Imeo, looking forward to this... now time to prep the Penelope's.
, add to cart with all tubes... don't forget the priority shipping, after all been waiting for months. Thanks Imeo, looking forward to this... now time to prep the Penelope's.
@Bishopheals
i'm reading your post as you talk in your video, with your voice in my head.
you are really the best C:
OOOOOOOFFFAAAA!
anyway i agree with Bishopheals in every point. I don't really love how esterigon looks but that's personal taste.
i've tried from Martino and this is a fantastic mod and really user friendly.
i'm reading your post as you talk in your video, with your voice in my head.
you are really the best C:
OOOOOOOFFFAAAA!
anyway i agree with Bishopheals in every point. I don't really love how esterigon looks but that's personal taste.
i've tried from Martino and this is a fantastic mod and really user friendly.
Last edited:
OOOOOOOOOFFFAAAA.......... My esterigon is in fedex vehicle for delivery to my location .
If you are already on the vehicle you'll arrive early, it will be worth it, a great mod to use and that's it!
hmmmm what do we have here ????
Guys I am glad that imeo went with the 18500 size. The form factor is just right in your hand. Of course I will use the 18650 tube for long trips.
Guys this device is waay more beautiful when you see it live. No time to play with it now getting back to work
Guys I am glad that imeo went with the 18500 size. The form factor is just right in your hand. Of course I will use the 18650 tube for long trips
.Guys this device is waay more beautiful when you see it live. No time to play with it now getting back to work
I drop my mods a lots and one thing that distinguishes GG products from most others is quality.
Two big drops on a hard surface and everything just works fine...
Do I care about voltage drop? Sure.. but a) it's not that big of a difference b) it doesn't matter that much with electronic right around the corner.
I could go on forever but I don't want to repeat things that we've said before.
Two big drops on a hard surface and everything just works fine...
Do I care about voltage drop? Sure.. but a) it's not that big of a difference b) it doesn't matter that much with electronic right around the corner.
I could go on forever but I don't want to repeat things that we've said before.
seek, the voltage drop is a silly matter to my opinion too but its 0,15 volt with a 1,5 ohm atomizer. Is there a mod with less voltage drop and I dont know it? ok, I will try to make another video about voltage drop just to show you that esterigon is the best on this field too
- Status
