Esterigon official

[imeothanasis]

What we need now is not a new pv not a new atomizer but a new heating system that is never dry and does not require wire nor wick. If someone can do it it's imeo. With all what we have in the market we have lots of beautiful mods and lots of beautiful atomizers and tasty juices. What we need is infinite vapor with never drying and as high in watts as we want.

VIR and Tilemahos together will be able to do exactly that aal. No worries at all.

 

[Aal_]

I see your point zero

I think that these days people will buy everything. Its not my style of course to make "everything" and I know that some day we will realise that we throw our money away without reason but thats life. We usually learn the hard way. lol

ok, after Tilemahos we can run preorders about everything. You will tell me what you want to see and I will make it. And of course I will make new constructions the way I like it. We will have 2 lines of production. Yours and mine

That's a great strategy and it's good that you reached the point where you can do both. Not a lot of people can. I just hope you don't waste some constructions that Noone will buy. I know you know better with your marketing thinking but I always worry about businesses who make too much of something and lose money lol. Good luck.

 

[imeothanasis]

Thank you aal

if I make what you ask me and also make something by my own that you will like it too then I am ok with money and I am ok with you too buddy. Requests and innovation at the same time is the best strategy if you agree.

GG is different in all aspects and I want to keep it that way on stategies too

 

[D Stanley Querfurth]

VIR and Tilemahos together will be able to do exactly that aal. No worries at all.

 

[Sad Society]

If Esterigon gets released as a copper mod, there will be an army of vapers joining GG family. Give Stingray and XXIX run for their money.

You're talking about mods that use bottom switch button technology. I know what you are talking about...comparing to using brass mods. But IMO there are very few mech mods with a side button, and Esterigon is one of them.

Even with 18650 Esterigon, it is still elegant and slim. The other 18650 bottom button mech mod I have is very heavy and bulky compared to Esterigon.

Like I said...I know that you want to compare (future) Esterigon brass to other brass mods. But regardless of what metal it's made, in my mind they cannot be compared. Of coarse you are free to speak your opinion, and I am free to speak mine. No argument here my friend.

Even when I lose my button spring, it was easy to fix using a pen spring. And the new button spring was then a little stiff at first but it feels more soft with now with use. And even with a different spring, I still haven't have any miss-fires.

 

[Sad Society]

Thank you aal

if I make what you ask me and also make something by my own that you will like it too then I am ok with money and I am ok with you too buddy. Requests and innovation at the same time is the best strategy if you agree.

GG is different in all aspects and I want to keep it that way on stategies too

I was spending lots of money on disposable atomizers. This was years ago when vaping was still considered new. Then I discovered RBA's. I knew exactly what kind of RBA I wanted, but I didn't know if it existed. I searched up and down the internet and I finally found Scott's review of the Penelope V1. Of coarse I was late to the party and Penelope was sold out. I told my wife that a Penelope was what I wanted, and it would save me money from buying disposable atty's in the long run.

She bought me a Penelope V1 when they were in stock again...And long story short...GG became my favorite company. Now I have two different Penny's and my new Esterigon.

Keep doing what you do Imeo. My wife even brags to our friends, that I talk to creator/owner of GG online.

(Sorry this post was a bit off topic.)

 

[JMBH]

zero, I dont know if you are right on this but if you are, I do have some questions:

1. copper tarnish a lot and it gets green
2. We will earn 0,05 volts, that is really nothing
3. Copper tarnish inside tube too so cleaning becomes much harder

I am wondering where vaping is going sometimes. But I do think that we are in experimental times, so people still try to find the best. To my opinion we search for nothing. We already have the best.

What we all really need is a mod that is very user friendly, thin, made in a clever way, with very good conductivity, no gaps and beautiful too (if we are talking about mechanical mods) and something that will solve serious problems on vaping (if we are talking about electronic mods).

Imeo , I agree with you 100% . We need mod and atty , user friendly , nice , sufficient conductivity and i would add Light Weight . I find esterigon and penny v3 the best at this moment , using it all day and all situation. But when I go out I like keeping my ecig just in my shirt pocket and thats the time I miss a really light mod off coarse with all features mentioned. Would be perfect thought , because portability is not only about size , I think weight is also a very important fact.
Surgical grade titanium ? ( there are a few titanium alloys out there, to expensive ? that much ? ) aluminum or duraluminum alloy ? plus the VIR tech. you are mentioning ..... in tilemahos , That would be very close to perfection already ... If there is someone that could make this ... Thats You

 

[RiverNut]

VIR and Tilemahos together will be able to do exactly that aal. No worries at all.

 

[Electraglide1]

I remember when Imeo wondered if we were interested in a new mechanical mod while we awaited Proteus. Then he decided to make 500 units. Later he decided to up that to 1000. Now he finds out that the resellers need MORE to be made! It should be apparent to all that the Esterigon is a device worthy of its GG heritage.


Sent from my iPad using Tapatalk

 

[imeothanasis]

give my kind regards to your wife Sad

I was spending lots of money on disposable atomizers. This was years ago when vaping was still considered new. Then I discovered RBA's. I knew exactly what kind of RBA I wanted, but I didn't know if it existed. I searched up and down the internet and I finally found Scott's review of the Penelope V1. Of coarse I was late to the party and Penelope was sold out. I told my wife that a Penelope was what I wanted, and it would save me money from buying disposable atty's in the long run.

She bought me a Penelope V1 when they were in stock again...And long story short...GG became my favorite company. Now I have two different Penny's and my new Esterigon.

Keep doing what you do Imeo. My wife even brags to our friends, that I talk to creator/owner of GG online.

(Sorry this post was a bit off topic.)

 

[imeothanasis]

I have great thoughts in my mind JM, no worries buddy

Imeo , I agree with you 100% . We need mod and atty , user friendly , nice , sufficient conductivity and i would add Light Weight . I find esterigon and penny v3 the best at this moment , using it all day and all situation. But when I go out I like keeping my ecig just in my shirt pocket and thats the time I miss a really light mod off coarse with all features mentioned. Would be perfect thought , because portability is not only about size , I think weight is also a very important fact.
Surgical grade titanium ? ( there are a few titanium alloys out there, to expensive ? that much ? ) aluminum or duraluminum alloy ? plus the VIR tech. you are mentioning ..... in tilemahos , That would be very close to perfection already ... If there is someone that could make this ... Thats You

 

[imeothanasis]

Customers showed their love on esterigon Electra and I have to support their decision.
Also I have to support almost all GG constructions by making more of them or parts for them

I remember when Imeo wondered if we were interested in a new mechanical mod while we awaited Proteus. Then he decided to make 500 units. Later he decided to up that to 1000. Now he finds out that the resellers need MORE to be made! It should be apparent to all that the Esterigon is a device worthy of its GG heritage.


Sent from my iPad using Tapatalk

 

[Dontknow]

VIR and Tilemahos together will be able to do exactly that aal. No worries at all.

As Proteus software testing is nearly complete (2 to 3 weeks in another post) - when might the new electronics module be available for existing mods? JustGG, Esterigon etc....?


Sent from my iPad using Tapatalk

 

[imeothanasis]

exactly after Proteus sales I will start making the new software for GGTS-justGG-Stealth Dont

 

[monkkx]

I came back from holidays and could finally put my hands on my esterigon with the 2 additional tubes today only ... it has been said many times already, but gosh this mod is cute as hell !!! the wonderful button and all automatic adjustments makes it a perfect device for any vaper !
Here with the 18350 tube, and the short penelope (AFC ring removed).

 

[UTUTUT]

Finally i got my esterigon yesterday !!!

it is much much better than my expection

shining polished, very easy switching, very hard hitting, locking system and spring loaded application also good

but it is so hard to moving AFC ring even i use vaseline, it still.. but i don't use AFC ring much, so i dont matter

maybe it will be easy to moving AFC ring some times later

thank you imeo and esmokeguru !!

 

[RiverNut]

congrats UT!

if it's still hard to turn after using Vaseline, you could sand the O-rings a little bit with fine sandpaper.

 

[UTUTUT]

congrats UT!

if it's still hard to turn after using Vaseline, you could sand the O-rings a little bit with fine sandpaper.

Oh thank you Rivernut

I do sand o ring of my afc ring after see your post and it becomes more smoother !!! thank you

 

[imeothanasis]

I am glad you like it UT.
If ring is hard for you then you can do as River said or take off the one of the o-rings

Finally i got my esterigon yesterday !!!

it is much much better than my expection

shining polished, very easy switching, very hard hitting, locking system and spring loaded application also good

but it is so hard to moving AFC ring even i use vaseline, it still.. but i don't use AFC ring much, so i dont matter

maybe it will be easy to moving AFC ring some times later

thank you imeo and esmokeguru !!

 

[utal]

Hi, got 4 x Orbtronic SX22 18650 and none is fitting the 18650 tube.

Just received my Esterigon in the Mail it looks so good sexy maybe my wife will like this one. Can confirm that Panasonic NCR18650PF,AW IMR 18650 3.7v 2000mAh (7.4w), Orbtronic SX22 18650 bats fit for sure in the 18650 tube of course. In depth video next week. Hope it doesn't get scratched!