I ordered a 30mm Glaz RDSA to go on Boxer clone, anyone have an opinion on Glaz? 250 c arrives today also so Ill be starting that soon
I have the RDTA, but do need to pick one of the RDSA's up for my LV Drone.I ordered a 30mm Glaz RDSA to go on Boxer clone, anyone have an opinion on Glaz? 250 c arrives today also so Ill be starting that soon
I'm waiting for the metal top cap version that is dropping in March.
"Glaz RDSA V1.1(Release in March)
Add metal top cap with diagonal top-side airflow, Glass drip tip included.
Improved Squonk part to stop over-squonk leaking."
I was going to order that mesh for the Profile, after watching several YT videos, it seemed like there is little difference between them? Also there are many Positive feedbacks on the OG mesh
I guess it'l be on my next order in March! Big shout out to the mailman! for being out there in this hellish weather
The EUC adapter works nice in the A tank
I can see why so many like the EUC coil, I'm trying to run it in TC in the BB? We'l see how that works out? The coil gives nice flavour & the draw is nice & open (RLH) The price is rite! Seems like another good blister pack coil option for the BB I'l try my best to get a good result in TC, but if not I can run it in Watts mode I'm running 2 A tanks, 1 with the EUC coil & another with the Aspire .4 ohm Clapton Wire Coil. I cant really decide witch I like better? They are both really good
IMO the A tank is a must have for the BB, Many option for it, Even Mesh! will see how the EC-m coil does when it gets here
Awesome News!I was going to order that mesh for the Profile, after watching several YT videos, it seemed like there is little difference between them? Also there are many Positive feedbacks on the OG mesh
Big shout out to the mailman! for being out there in this hellish weather
The EUC adapter works nice in the A Tank
I'm running 2 A Tanks, 1 with the EUC coil & another with the Aspire .4 ohm Clapton Wire Coil. I cant really decide witch I like better? They are both really good
My FT order is waiting at the post office so I'm dashing out for a few minutes to pick it up, it has the A-Tank so there will be an EC-M coil tried today!
I ordered a 30mm Glaz RDSA to go on Boxer clone, anyone have an opinion on Glaz? 250 c arrives today also so Ill be starting that soon
My SXK Boxer Clone could be here as soon as tomorrow
I have all I need for the swap I choose the Drop Dead RSA, it seems to have a lot! of Positive feedbacks! It looks like it will be hard for it to leak from over squonking? Thats one of the big things I look for in an RSA, I have the profile coming so I'l see witch I like better
I was looking for a 30mm RSA for it at first, but didn't really like any of the choices
The Cthulhu Zathog looked interesting, but reviews were Luke warm The Warhead looks nice but the low air holes scared me off I love Steam Crave products, but the Glazz has the bottom Air Flow I can see over squonking it & juice coming out the Air holes I'l run a 24 for now, all ways being on the look out for a nice 30mm RSA
Last edited:
CCI Centurion V2My SXK Boxer Clone could be here as soon as tomorrow
I choose the Drop Dead RSA for it seems to be a lot! of Positive feedbacks for that one! It looks like it will be hard for it to leak from over squonking? Thats one of the big things I look for in an RSA, I have the profile coming so I'l see witch I like better
I was looking for a 30mm RSA for it at first, but didn't really like any of the choices
I'l run a 24 for now, all ways being on the look out for a nice 30mm RSA
, Modfather or maybe a Deathtrap (Single coil). I had a 30mm Temple but couldn't get rid of it fast enough, way too much air.
(6mm ID 22ga)
Bah... got my orders confused... 
Carved panels for the Inbox
, a regular tank and the EUC coils...
Carved panels for the Inbox
, a regular tank and the EUC coils...
I'm sure the next order will be along soon?
The EUC coil with the adapter will fit any Aspire coil tank, if you have one hanging around at least you can check out the EUC's
The EUC coil with the adapter will fit any Aspire coil tank, if you have one hanging around at least you can check out the EUC's
Those 3 all look good! especially the Deathtrap! I'v eyed it up before in some Canadian shops for a round $100CCI Centurion V2
Only thing is they all look more like RDA's not RSA's I'm a chronic over squonker
& need the higher Air holes type RSA
Drop Dead This is an RSA! I can do a Big Huge Squonk with no leaking out at all
The flavour could be a bit better? Mite just need to tune in my coil position?
BTW, this is the "Styled" version! $7.15
This is an RSA! I can do a Big Huge Squonk with no leaking out at all The flavour could be a bit better? Mite just need to tune in my coil position?
BTW, this is the "Styled" version! $7.15
When you change wattage on your DNA250C mods, does it change by one watt increments? Frank's theme has a settings for 0.5W or 1W increments. That is the way it used to work. But lately it has been jumping by 5W increments if I have 1W selected and by 1W if 0.5W selected.
I thought it was a bug in Frank's theme. So I loaded the default theme and the same thing. Tried Jason's theme and the same. Checked 2 other DNA250Cs and the same there too. I dunno the latest firmware changed everything? It didn't use to work this way.
I thought it was a bug in Frank's theme. So I loaded the default theme and the same thing. Tried Jason's theme and the same. Checked 2 other DNA250Cs and the same there too. I dunno the latest firmware changed everything? It didn't use to work this way.
Nice!The EUC adapter & coil in the A Tank & the 5 mil kit for the Plus
The 5ml tank is not for me on the Plus, refill way too often.
Nice!
The 5ml tank is not for me on the Plus, refill way too often.
I hear that! Capacity is like Horse Power, even if you don't need it, it's nice to have
On this mod it looks good thou
So is this what's causing all that cold weather?
There's No Need to Freak Out Over Russia and China's Atmospheric Experiment | Inverse
There's No Need to Freak Out Over Russia and China's Atmospheric Experiment | Inverse
I bought 3 of these battery cases on eBay probably around 2003. There is no name of manufacture, patent number or anything on them. I really like them and one of the nicest battery cases I ever used even today. That orange part is rubbery and semi-hard and really grips the cells well with no battery rattle. Anybody seen them anywhere?
So I received my Aromamizer and it just about emptied the tank before I got to try it. I first thought not enough wick tails but upon inspection they looked OK to me. I'm using the single coil deck. Then I took a look at (feel) how the o-ring on the deck (approx 12 x 1) sealed against the chamber wall and didn't like it's loose feeling. I changed it to a Buna 12 x 1 and no more leaking, that's all I did when I went back in there. Still might have been some type of user error as I have no experience with it yet.
Last edited:
Similar threads
- Locked
