Evolv-ing Thread

dwcraig1

Vaping Master
ECF Veteran
Verified Member
Mar 17, 2012
9,013
49,477
Imperial Beach, California
So I make two versions of my DIY peanut brittle, one is 75% PG and 12.5 Mg nic and the other is 85% VG and 8 Mg nic (squonk juice).
The Aromimizer didn't seem to take well to my squonk juice so I replaced it with RTA juice. I was hitting temp super quick, throttling down to 12 watts from 40. Testing
 

gnees

Vaping Master
ECF Veteran
Verified Member
Mar 31, 2014
3,061
25,752
Zephyrhills Fl.
57986b0e38d85fa521b0962b5e0aaee5.jpg
 

dwcraig1

Vaping Master
ECF Veteran
Verified Member
Mar 17, 2012
9,013
49,477
Imperial Beach, California
So in the end it didn't appear that the thickness of the juice was the problem, just a bad case of 316 blues.
Edit: made a pretty big typo here, it was suppose to say that the thicknes of the juice as not the problem just some 316 problems.
 
Last edited:

BillW50

Vaping Master
ECF Veteran
Verified Member
Nov 23, 2014
3,429
34,510
US

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
Go ahead, tell me that I'm the first one to put both legs in the same block.....I didn't think so. I did catch it fairly quickly though.
Quite a few have done that on the Steam Crave FB group. They post a picture of the build with a rant about junk hardware, 510 pins too short and so on...

Priceless when someone points out their error. :D
 

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
Not Bad for $29 :) I put a 7 mil Lost Vape Bottle in it, bit tight but fits :)
I'l run it like this for a few days, just to make sure it don't leak or any other issues?
Then I'l swap the 250c in :)

7a3h7g6.jpg


eZz5scJ.jpg
How are those LV 7ml bottles? The silicone looks thick like the ones on the Furyan.
 

Steamer861

Ultra Member
ECF Veteran
Verified Member
Jan 13, 2014
2,710
23,383
Canada
How are those LV 7ml bottles? The silicone looks thick like the ones on the Furyan.

The bottles nice! Only thing is they have this stupid fill hole in the collar :(
The collar swivels around & a fill hole lines up, I don't like it cause it could leak :(
I stuffed a piece of oring rubber in the small hole. It's an easy fix, but the fill hole is Stupid & should have never been there at all!

I tried the 10 mil bottle from the Squeezer, it fits too, just a bit to wide & not tall enough, the bottle bubbles out the squonk hole a bit :(

The LV bottle fits the best out of all the bigger capacity bottles I have :)

taCyrGU.jpg
 
Last edited:

BillW50

Vaping Master
ECF Veteran
Verified Member
Nov 23, 2014
3,429
34,510
US
The bottles nice! Only thing is they have this stupid fill hole in the collar :(
The Therion BF has bottles like this too. But they are not fill holes in this case, but a breather hole so when you top fill through the 510 you don't have to do all of that tilting thing. I think I used it once just to see how well it works. But I don't mind it is on the collar or not. I just make sure it is closed and it only takes a second. I never had a leak if it was closed. :)
 

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
The bottles nice! Only thing is they have this stupid fill hole in the collar :(
The collar swivels around & a fill hole lines up, I don't like it cause it could leak :(
I stuffed a piece of oring rubber in the small hole. It's an easy fix, but the fill hole is Stupid & should have never been there at all!

I tried the 10 mil bottle from the Squeezer, it fits too, just a bit to wide & not tall enough, the bottle bubbles out the squonk hole a bit :(

The LV bottle fits the best out of all the bigger capacity bottles I have :)

taCyrGU.jpg
Thanks, might have to try a few out. Looking for a replacement bottle for the OG Drone PET bottle but have found nothing yet I like and that 11ml capacity is hard to give up.
 

Steamer861

Ultra Member
ECF Veteran
Verified Member
Jan 13, 2014
2,710
23,383
Canada
Thanks, might have to try a few out. Looking for a replacement bottle for the OG Drone PET bottle but have found nothing yet I like and that 11ml capacity is hard to give up.

The new drone must have an upgraded (silicon) bottle? They're all most identical, so a spare new drone bottle, maybe?
The LV 7 mil isn't cheap! I think it was $30 for 5, wouldn't of been too bad if that hole didn't bug me!
 

Users who are viewing this thread