- Status
tank-Ecigs is going to have a few in a few days (keep checking or contact them ) this is going to be the last of the 3/32.
The T2 comes with the glass tank and the T+ comes with the plastic tank. I have both. They have 3/32 holes. I have seen some vendors that sell the glass tank with the T+.
There is a co-op currently closed that the host had Zhuhai Youde Technology, the maker of the AGA/T2/T+/igo-l, make them with 1/8 wick holes and with the original red/orange o-rings. They still come stock with 3/32 holes I believe. Some one will have to confirm this with the new ones that use a clear, I think it is silicone, top hat to seal the tank instead of the old reg/orange o-rings.
They probably drilled it out.
Last edited:
ok, well the guy was saying the T2 was 1/8th, and had a closer center rod to help with hotspots. he musta been high.
Some of you guys need to check out http://www.e-cigarette-forum.com/forum/modding-forum/362182-next-big-thing-porous-ceramic-wicks.html thread. I don't mean to be an ..., but Dan, me, zippersnapper, gdeal, and countless others have been kicking this stuff around for months. Modding attys, AGAs, setups, creating attys, methods of turning ceramic, etc.
You guys have some great ideas, so don't get me wrong.
Just sayin'
You guys have some great ideas, so don't get me wrong.
Just sayin'
They moved the wick hole closer to the center post on the T2/T+.
I hear you.....but you did ask and that is one that I have along with the AGAt2. One fits 1/8 and one doesn't.
There is the DID clone. I believe it is 1/8" and I know where to get 3 of them for $25 plus shipping.
Edit: I guess the clone is actually a clone of the mini DID and has more like a 2.5mm wick hole but could be bored out easily as it is copper plated brass.
Edit: I guess the clone is actually a clone of the mini DID and has more like a 2.5mm wick hole but could be bored out easily as it is copper plated brass.
Last edited:
I heard that the ceramic can crumble/be inhaled/etc. meaning it isn't a safe alternative to SS (although SS has it's own problems with Chromium IV or whatever right now). Is that true? Ceramic seems like it would be great from an ease-of-use perspective (don't have to worry about shorts and etc.).
Second round of ceramic wicks should be shipping from Tank tomorrow. He has some 3/32" wicks squirreled away and Eric might tell you where they are hidden if you ask nicely. He is not expecting any more of these after this lot goes so you might want to stock up. Damn they are expensive but as I have been spoiled for taste because of these I can't see myself ever going back to SS wicks so I have paid up and will baby this lot to last a long time.
The DID (real) is 3.5mm and fits a 1/8th beautifully. They are a little pricey but superb quality and great setup for 1/8th. The 1.5" wicks are the perfect height as well.
So is the clone a clone of the mini DID and has a smaller wick hole?
I don't know much about the clones. The mini DID has 2.8mm wick hole and the standard has 3.5mm.
Here is a link if you want to check them out. They sometimes have specials for cosmetic flaws so if you want a cheaper one keep an eye out:
MMVapors
- Status
Similar threads
- Locked
