Flat top Panasonic CGR18650CH with PROVARI

Status
Not open for further replies.

dhomes

Super Member
ECF Veteran
Verified Member
Mar 20, 2012
942
1,073
Austin, TX
Hey guys, I bought a set of 4 Panis from Amazon at a great price, mostly to be used with a SS VAMO and a smok The Natural.

However, I'd like to use these on a provari.

I have read about using magnets or use a bit of welding at the top.

Not sure about either but I think I prefer the magnets

AVIDVAPER sells these magnets specifically for this purpose.

They are right here: Magnetic Battery Spacers - Avid Vaper and sold for that purpose

Any experience you could share?
 

DaveP

PV Master & Musician
ECF Veteran
May 22, 2010
16,733
42,646
Central GA
The positive contact on the board inside the Provari requires a button battery to make contact. I wouldn't modify the battery. If the magnet slips you might end up applying voltage to the board or steel tube ... somewhere besides the contact itself. I wouldn't take the chance.

IMR and Li-ion batteries can provide tremendous instantaneous current. You would be playing with fire, literally.
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
Trustfire2.jpg

As someone who has had a "bad battery experience", don't attempt to make modifications. I know others do it, but they do it at their own risk. Use some common sense and just use the proper battery that the manufacturer recommends. Saving a few bucks on cheaper batteries or chargers; or using something for convenience because you have something already is not worth it in my opinion.

Everyone above is giving sound advice. Use it.

http://www.e-cigarette-forum.com/forum/warning-rechargeable-batteries-apvs-mods/
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread