Moved to a new thread with a title more fitting.. Blue Foam PLUG! BFP 510 Cart Mod - The Search is over! 
Last edited:
Foam Plug! No filler or spring needed!
- Thread starter eclypse
- Start date
- th_trl_thread_readers 0
- Status
Been testing this since the post and its perfect so far! Its wicking perfectly as i can tell its keeping the atty moist. I can hit it every 3 secs and its a perfect hit every since time.
Still on the same cart with no signs of drying out yet.
This has to be the cart mod for me and boy will it be cheap as you dont use much foam at all hehe.
Still on the same cart with no signs of drying out yet.
This has to be the cart mod for me and boy will it be cheap as you dont use much foam at all hehe.
Last edited:
I started using this last week so far no problems- I don't get that burnt taste any more.
mine fills the cart- so you are saying you only use a small piece to plug the end?
Yes just at the top/end a hair wider then the cart long ways.
NOTE:
Just ran dry.. i pulled the plug off the top and YES, its totally dry! The cool thing is that i knew on that last puff that its was all gone as it made a squicky noise as its was taking that last drag.
Pulled the top off with tweezers, filled it up to the little groove in the inside of the cart and placed the foam plug back on top. Added another drop to the top and inserted back into the atty and puffed away.
I didnt get to count the puffs or how many times i was able to go out and smoke but i think its was around 4-5 times and those were long vaping periods.
Again, more details coming in the next few hours after my wife gets home when i get some free time.
Rust don't bother me pal..
I slap a heavy coat of this on my springs every morning..
>
Sounds good eclypse, are you using a 510 cart?
I'll give it a go, but I don't think it'll work in my 801...but hey, nothing to lose.
..
Well, i cant wait for someone to try this.. I'll try to give some details right now without the pics as i'm busy but i'm so excited at how incrediable this works! Smiles all over my face.
Just topped the cart off for the 3rd time.. Its soo freakin neat how it totally empties the cart each time and you know when its dry as there totally no vapor! Unlike the usuall, where its dry but you can still suck on it a little longer or harder to get something out of it as usually the filler will still be holding some juice. You'll know when theres no juice as there totally no vapor.
3rd time and i can still use the same foam plug.. so thats cool.
Heres the size of the foam pad i'm using.
Ruffly 10.22 mm long x 6.88 mm wide.. in inches its 0.409 x 0.267. The thinkness is stock for the pad.
If you look into the cart you'll see a lip on each side. That lip is what holds the foam plug in place along with the springiness of the foam. So the lip is how deep the plug going in. Fill the cart up to that lip with juice and then insert the little foam square so it rests on that lip. Then just just 1 to 2 drops on the foam if you like. The last time i did not and it worked just as good right away.
The atty bridge will hit the foam just right and wick like you've never experianced before!
Absolutely 0 flooding or juice in the mouth but yet the wick feels nice and wet!
I'm starting to think that its wicking good enough to try 6 volts
Just topped the cart off for the 3rd time.. Its soo freakin neat how it totally empties the cart each time and you know when its dry as there totally no vapor! Unlike the usuall, where its dry but you can still suck on it a little longer or harder to get something out of it as usually the filler will still be holding some juice. You'll know when theres no juice as there totally no vapor.
3rd time and i can still use the same foam plug.. so thats cool.
Heres the size of the foam pad i'm using.
Ruffly 10.22 mm long x 6.88 mm wide.. in inches its 0.409 x 0.267. The thinkness is stock for the pad.
If you look into the cart you'll see a lip on each side. That lip is what holds the foam plug in place along with the springiness of the foam. So the lip is how deep the plug going in. Fill the cart up to that lip with juice and then insert the little foam square so it rests on that lip. Then just just 1 to 2 drops on the foam if you like. The last time i did not and it worked just as good right away.
The atty bridge will hit the foam just right and wick like you've never experianced before!
Absolutely 0 flooding or juice in the mouth but yet the wick feels nice and wet!
I'm starting to think that its wicking good enough to try 6 volts
Last edited:
Rust don't bother me pal..
I slap a heavy coat of this on my springs every morning..
>
Sounds good eclypse, are you using a 510 cart?
I'll give it a go, but I don't think it'll work in my 801...but hey, nothing to lose.
..
hehe.. Nice. Yeah its for the 510.. Never had any other cart so i'm not sure. Though the 510 has a lip on the inside that the plug rests on. Not sure what would happen if theres no lip. But if you know exactly how far in the atty goes into the cart it may work. I would'nt add juice till you see if the plug moves on you when you insert the atty.
Yeah, no lip here, it just slips and slides around, still, the spring works for me, but I do like the idea of the one single component for convenience.
You sure you could'nt just make the piece thicker and it would hold as long as you had it at the right height in the cart?
heh well i'll be getting some 801 attys and carts sooner or later so i'll figure that one out then.
Heard the 801 is better for high voltage.
heh well i'll be getting some 801 attys and carts sooner or later so i'll figure that one out then.
Heard the 801 is better for high voltage.
Can you explain a little bit more about the foam you're using? I've never heard of that brand.
Thanks...
jm
Thanks...
jm
The brand is Marineland Bonded Sleeve Foam, Rite-Size "U"
You can buy this at Pet stores. I bought it at Pet Smart.
Its filter material for fish tank filters.
Pics and details coming shortly.. uploading the pics now on the computer.
Last edited:
my carts don't have a lip, and i'm leary of using the metal spring, so I tried another variation... little straws, 2 of them, in the bottom of the cart to hold up the plug... I also cut the bottoms of the straws at an angle.. not sure if that's needed, but I did it anyway
so far it's working fine
so far it's working fine
im working on a mod almost just like this for the 801. but there is no lip in the cart so i have to do somthing like debra said with a straw. im useing heat srink with the end melted down to hole the poly better. so far so good but dont want to do a tut on it till i know it works good and the 801 cart takes about 20 drops of juice so it takes a wile to get through a cart
Moved to a new thread with a title more fitting.. Blue Foam PLUG! BFP 510 Cart Mod - The Search is over!
I bought the blue rite size u filters form Petsmart at 5pm today.
Still using the same cart and hits hard!
It's like I just put it in there 1 minute ago.
Still going strong after 6 hours!
I own the 510 titan.
The blue foam plug is the best I have used so far! THANKS!
Still using the same cart and hits hard!
It's like I just put it in there 1 minute ago.
Still going strong after 6 hours!
I own the 510 titan.
The blue foam plug is the best I have used so far! THANKS!
- Status
Similar threads
- Locked
