On another note, got a package from Tami today just because LOL
Here is the little gem she sent me:
Cutest little 18350 mod I have ever seen, Thanks Tami
I love that!
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
I love that!
That came out pretty good Tami, I like the blues in it
It has 3 coats of clearcoat on it already. The shine didn't make it into the picture. 
Very nice Drifter. That is cute.
My behind is a little sore now from multiple POW POW's.
Here's what came in today.
I vaped this thing at 100W OMG
My behind is a little sore now from multiple POW POW's.
Here's what came in today.
I vaped this thing at 100W OMG
You're very welcome sweetie!On another note, got a package from Tami today just because LOL
Here is the little gem she sent me:
Cutest little 18350 mod I have ever seen, Thanks Tami
Very nice Drifter. That is cute.
My behind is a little sore now from multiple POW POW's.
Here's what came in today.
I vaped this thing at 100W OMG
I got one today, too
Very nice Drifter. That is cute.
My behind is a little sore now from multiple POW POW's.
Here's what came in today.
I vaped this thing at 100W OMG
Bro that is so awesome !!! Congrats !!! I'm so jelly
I bet you forgot all about your stolen Workhorse now
Better keep a close eye on that one !
Very nice Drifter. That is cute.
My behind is a little sore now from multiple POW POW's.
Here's what came in today.
I vaped this thing at 100W OMG
Very nice, that should take your mind off your sore hiney!
Bro that is so awesome !!! Congrats !!! I'm so jelly
I bet you forgot all about your stolen Workhorse now
Better keep a close eye on that one !
I still miss the Workhorse but this will do.
I got one today, too
Nice. It's pretty small for dual 18650.
Thanks to Nikki and Cindy for the triple spankedified.
Infinite's is the one that's gotten reviewed a few times. FT carries it now, but I have no idea where they got theirs from. I'm not that picky though, as long as it works.I can sure ask .. but don't forget that FC is a not vendor who knows product by name and that is current with the market. They only know what suppliers offer to them, and what customers request for them to carry... and what I tell them they should carrySo I can promise they are not out hunting for the Nahualon
He probably did, till you reminded him again...Bro that is so awesome !!! Congrats !!! I'm so jelly
I bet you forgot all about your stolen Workhorse now
Better keep a close eye on that one !
It sucks people are having problems with the squape and weird that mine has been so trouble free, I have the extra o-rings in a bag, but pretty sure the tank already has them on too, as had no leaking at all, maybe I got the 1st one they did, and after the hassle of installing them o-rings, they said sod it, let the customers do it
You stole my Squape R! I am supposed to get the perfect one!
.. If you don't have any leaking and I would guess that your tank did come with the o rings installed. Warning, don't take that tank out because those o rings are a bish! And I wished they would have used black or red o rings because the white o rings are terribly fragile. White = thin and weak, Black = average density/strength and Red = thick and strong
The Squape R is a sweet looking atty, very nice lines, looks great set up ,, but ... Its like dating that Hot guy/girl with a janky attitude
You constantly think about breaking up with them, but then you look at them again and decide to give it another chance Nikki - problem resolved so thank you very much for whatever you did
Awesome hun ... and I did what I always do, I type real fast and exasperated like, and give her 100 reasons why she must take care of my honey boo's
It works
You know what this means right? .. You owe us porn, of the imgur.com variety
Last edited:
I was sure they were too big as well, but they actually aren't. Once you get them in, they are actually perfect. Getting them in though is another story
I have a theory on my post screw issue. I will update once I know for certain, but I suspect the chimney is unscrewing it. Its all tight as hell, but unscrews when I put the base on the tank. They are screws with large heads and are very close to the edge of the deck.
As soon as I get the chance I will try to find screws that fit with smaller heads and see if that solves it. If not, I will see if I can get a different deck.
Nikki, do you think you can find out what size those deck screws are?
My chimney came off once when I unscrewed the tank, and was stuck to the deck .. I tightened the chimney back in making sure that I turned until the hex key wouldn't turn anymore, and it has not come off with the deck since .. and I have taken the tank off several times.
Maybe you received properly sized o ring, but mine were no doubt too large, and much bigger than the inner diameter of the tank .. the Rose o rings were perfect. I took pictures of the two different sizes so I can use it in my review.
I doubt that FC will be able to find out the exact size of the screws used, you would have better luck referring to the authentic for that information.
You know what this means right? .. You owe use porn, of the imgur.com variety
All hail queen Nikki...you wish shall be fulfilled once I get it that is
That is so cute .. I have seen this mod recently, someone on a South African forum did a review on the 18650 version. Enjoy it dear
On another note, got a package from Tami today just because LOL
Here is the little gem she sent me:
Cutest little 18350 mod I have ever seen, Thanks Tami
Infinite's is the one that's gotten reviewed a few times. FT carries it now, but I have no idea where they got theirs from. I'm not that picky though, as long as it works.
FT prolly got it from Cigreen ... Infinite being a branded reseller, overcharges for everything, so I doubt FC would get it from them. However, being that Infinite is reseller that means there is a manufacturer out there with a lower price
Awww 
.. Well thank you dear, you know I like my porn big
- Status
Similar threads
- Locked
