Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
I'm for sure going to order another one. That way I can double fist my two sigelei 100s with Mephistos on top. I'll do a Twisted420 "double toke"... and then probably die.
That would look delightful. BTW, I got my replacement Hobo deck with my Mephisto today and it is perfect. So, props to Doris. Did your Hobo show up?
I'm waiting for FC to drop the copper Slug before I go in on another Mephisto and the praxis. May as well stare at only one order in "collecting"... I mean other than the one I'm staring at now.
I'll be spinning the FC Wheel of Destiny again here soon. Maybe a couple of times.
Yeah hun, I posted a little while ago that I got by Hobo V2 and its mint. I love it, much better than I had expected so I am glad that it turned out to be worth USPS's torture
I will post unboxing pics in a bit .. but no serious porn yet 
I finally built the Aqua V2 ...Yeah baby, this is gooooooooooood!
As jummy as the first version, or even better? Okay, I know it´s too early to say.
I don`t want another pair of new atties - I have to buy a second Origen Genny too, if I like it.
In my case smoking was damn cheap
I've surpassed 10 setups as well. I have 10 in current use while others sit on the sidelines.
Nathan, since Doris is in love with you, might you suggest FC really needs an SXK black Stingray X?
Nathan, since Doris is in love with you, might you suggest FC really needs an SXK black Stingray X?
Ok here are my modest unboxing pics As I said I am very happy with the Hobo V2 and really relieved too. Whenever multi AFC are included with an inexpensive clone I worry that they will be super cheap and flimsy, but these are not at all. The two delrin caps are what you would expect, but the brass and copper rings are nice and solid. Also didn't expect those to actually be metal
The only thing that I am annoyed about is that the micro grub screws were not pre-installed. There are only 4 I feel like there should have been screws already installed, plus spares. Other than that I am happy.
The Origen Genesis V2 is soooo cute and exactly what I had hoped it would be in real life. Even as I expected it to be small, I didn't think it would be nano size but it is. The only thing that I am unhappy about is that there was no SS mesh included with this Genesis
I have been using Gennies for a year now and somehow I have managed to avoid every buying extra mesh because every Genny I have bought up until now came with enough mesh for at least two wicks. Luckily I do have a few sheets of unused mesh from other parts packages so I will survive
The two drip tips on the right are from FC, and the four on the left are from FT, both arrived today. I am on a DT binge because I have another 5 drip tips coming from a US vendor and I am scheming on at least two more
As I said I am very happy with the Hobo V2 and really relieved too. Whenever multi AFC are included with an inexpensive clone I worry that they will be super cheap and flimsy, but these are not at all. The two delrin caps are what you would expect, but the brass and copper rings are nice and solid. Also didn't expect those to actually be metal The only thing that I am annoyed about is that the micro grub screws were not pre-installed. There are only 4 I feel like there should have been screws already installed, plus spares. Other than that I am happy.
The Origen Genesis V2 is soooo cute and exactly what I had hoped it would be in real life. Even as I expected it to be small, I didn't think it would be nano size but it is. The only thing that I am unhappy about is that there was no SS mesh included with this Genesis
I have been using Gennies for a year now and somehow I have managed to avoid every buying extra mesh because every Genny I have bought up until now came with enough mesh for at least two wicks. Luckily I do have a few sheets of unused mesh from other parts packages so I will survive The two drip tips on the right are from FC, and the four on the left are from FT, both arrived today. I am on a DT binge because I have another 5 drip tips coming from a US vendor and I am scheming on at least two more
Last edited:
As jummy as the first version, or even better? Okay, I know it´s too early to say.
I don`t want another pair of new atties - I have to buy a second Origen Genny too, if I like it.
In my case smoking was damn cheap
First impressions say just as yummy .. I will hold off on any final and concrete judgements. But it certainly is not less than, just potentially more airy.
I love the look of this atty so, and now that we have performance confirmed to match its a total win.
Nathan, since Doris is in love with you, might you suggest FC really needs an SXK black Stingray X?
lol.
I'll gladly make the request after I buy the copper Slug so she knows I'm not just a tease... but I guess that means I'd have to buy the black SRX as well... and then a black atty to go with it.
lol.
I'll gladly make the request after I buy the copper Slug so she knows I'm not just a tease... but I guess that means I'd have to buy the black SRX as well... and then a black atty to go with it.
Black is hot, lol!
Nicole, will cotton work well with I the origen genesis? I still have that smoktech genny that I never use mainly because the flavor was just not great. I have never had good luck with genesis for some reason.
I don't do mesh so would have to use cotton, Also I can't tell by the pics but are there wore holes or do you have to trap it in between the middle nut for the positive?
I did however order me a slug and a lancia dripper. Thanks to nailz and inswva for feedback
I don't do mesh so would have to use cotton, Also I can't tell by the pics but are there wore holes or do you have to trap it in between the middle nut for the positive?
I did however order me a slug and a lancia dripper. Thanks to nailz and inswva for feedback
Last edited:
I only know that the Origen Genesis was designed to be used with both SS Mesh and cotton .. there is a 3mm wick hole for cotton. Can't really say how it would be with cotton because I am a mesh only Genesis kind of girl so when I build it its gonna be mesh. Check out some youtube vids because I know there are people using it with cotton.
I'm holding out on getting a genny for now. A little worried I'll go on another spree and start collecting those, lol! I think I need to enjoy the 12 attys I have right now for awhile. I've already passed on 2 kayfuns and my taifun as I wasn't using them.
How do you like it? I certainly don't need one but am always interested in unique stuff. Does the 510 stick up enough to use with hybrid top cap mods?
I was wondering how those would work. Seems like it would be awkward to hold and operate.
yeah it does which is why i pictured the 4nine with it if thats what you meant, i am trying to get a feel for it ,it may be better with a rotatable drip tip. i got it for its uniqueness too and i have a bunch of clone mechs now so i figured i would try it. it does fit in the hand stealthy though.
I think it depends on the atty mech combo on it. i am trying to find a good setup
Thanks. I'm envisioning using one of my SMPL clones and a dripper. Probably have to put one of those finned 510 heatsinks under the dripper to clear the mod. Wonder how much power the internals of the Ignition can handle.
- Status
Similar threads
- Locked
