I picked up the Ivogo Baby combo set when they lowered the price to $34. Since just the 17mm Kayfun mini is $25 I figured at the price of just $9 for the stainless steel Nemi, it'd be a cheap backup.
General impressions of it vs both the Ivogo and Tobeco Kayfun mini (14mm)...
You get a bit less than the mini. The standard chimney, chamber, base, top cap, drip tip and a clear and stainless lower tank section. The mini has in addition an extended chimney allowing you to configure it as a 3 piece tank for more volume at the cost of length. The Ivogo, both 17mm and mini include a 10ml needle tip bottle that fits into the bottom fill port. The Ivogo mini has an oversized clear section. This allows the e-liquid to fit between the wall of the chamber and the inside of the clear tank section. The walls of the plastic section are thicker because the weaker plastic vs metal tank material. This causes an issue with the Tobeco mini and the Ivogo 17mm. Fluid won't flow from the metal tank section(s) to the clear section because of lack of clearance. You can put your finger over the airflow hole and suck to get liquid to trickle into the clear section. So only the Ivogo mini works properly. You can work around the problem on the Tobeco mini by using the clear section as the middle part of the 3 section extended mode. I believe but haven't tried (and can't test because everything is full of juice now) that if you reverse the top and clear sections, as in use them upside down vs just reversing the assembly order, that you may get the 17mm to work. The machining on the base looks awful compared to either mini. But the exterior finish is nicely polished. Threading is a bit rough and again either mini has better threads. None are awful or crunchy.
General impressions of the baby mod vs a copper Tobeco Nemi and the stainless steel mixed Nemi offered by focalecig in their group buy vs the 5 full sized Nemeses clones I own...
As far as the Ivogo baby mod, well its a pretty standard stainless steel Nemi, mini Nemesis, with brass top cap and lock ring. Placed next to the Nemi that focalecig offered they look identical except for the bright gold colored accents on the focalecig version and brass on the Ivogo. The Nemi has the standard Atomaxi (sp?) Death Angel. The baby has a rather large Ivogo written lengthwise on the tube. Personally I'd have much preferred the Ivogo to have no logo if it wasn't going to get the death angel. Switches are comparable across all and nicer than the stock full sized Nemesis switches on the 5 different versions from various manufacturers that I own. They aren't as nice as the full size switches after a bit of work and magnets but close.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Well I guess I have my work cut for me 
Actually, I know that Doris was looking into the EHpro Budhha, which I really like. So I can ask her to ask the Pontus to the list if the people really want to see this item. I for one want to review it because if the dripper tank concept is as successful design then I see this becoming huge ... I want to review "different". So I will D-nice take a look into the Pontus 
If they start selling the baby Kayfun I may have to consider it.
.. I command you to stop talking to halfempty, and don't look at his pictures either! 
