Stormy's is a little higher on the pricing but the customer service is excellent.
- Status
Okay I'm gonna stop this mid-build and see if you guys can tell me if this is looking good, or if I'm doing something boneheaded. I'm leaving the silicone o-ring off this time. I'm hoping that will get this thing a'flowin'.
If I have to start from scratch again, I'll try a micro coil.
If I have to start from scratch again, I'll try a micro coil.
Zip,
The wick looks good for length ... Although that coil seems a little sparse ... I can't imagine you would get too much vapor production off of that coil.
-GoW
To be perfectly honest... Stormy's Vapor Cellar is A+ even if the website isn't one of the better production versions.
Stormy gives 199% to her customers, and if she carried every conceivable device out there, she would get my business exclusively.
But since she doesn't ... One does have to shop around to get what one needs to keep the vapemail flowing.
-GoW
Yeah I would like more coil coverage but I started out with 4 wraps and that came out to 2+Ohm.
Anyway. I guess I'll go ahead and reassemble this thing once more today.....
Anyway. I guess I'll go ahead and reassemble this thing once more today.....
I tried it without the chimney o ring.... literally got a mouthful of "ejuice geyser" and massive flooding.
I have probably posted this back a few pages but this is my setup on both of my Foggers, 28 gauge nichrome and the wick slots are widened some also. I suppose I should rebuild my other one with 26 gauge nichrome as that is what I have in every other micro coiled device that I have and then I'll be able to post a new picture.
And here is my wife's V1 with 30 gauge Kanthal, still the same coil that I put in it just changed the cotton a few times.
Last edited:
Here's a side view of how I'm doing my cotton wick, it barely pokes through, it's practically flush, but doesn't leak:
Yes to this, I'm on my third day of the best vape I've ever had, no leaks or dry burns and haven't even had to replace cotton
I kind of missed my target on this one:
It ended up @ 0.6 ohms with 26 gauge nichrome.
So I re-coiled it with 28 gauge and again missed my target but hit the sweet spot I guess, 1.1 ohms.
Target was 0.9 ohms but the 1.1 is real good for the amount of liquid that can be feed to the coil.
It ended up @ 0.6 ohms with 26 gauge nichrome.
So I re-coiled it with 28 gauge and again missed my target but hit the sweet spot I guess, 1.1 ohms.
Target was 0.9 ohms but the 1.1 is real good for the amount of liquid that can be feed to the coil.
Rawr seeing everyone posting how wonderful this is makes me wish mine was here... Did my buy off congrevape and the manufacturer is jerking them around. And now since the are closed for vacation till the 7th no chance of getting it for 2 weeks probably
I kind of missed my target on this one:
It ended up @ 0.6 ohms with 26 gauge nichrome.
So I re-coiled it with 28 gauge and again missed my target but hit the sweet spot I guess, 1.1 ohms.
Target was 0.9 ohms but the 1.1 is real good for the amount of liquid that can be feed to the coil.
What did you use to wrap your coil? Also do your coils touch?
Sent from my XT912 using Tapatalk 2
A stainless steel rod approx. 1/16" diameter, I get em touching the best I can.
I'm going to use your build here as a template for my attempts today.
Did you have to put that o-ring back on, the one that seems "optional" and sits
over the wicking channels?
Did you have to put that o-ring back on, the one that seems "optional" and sits
over the wicking channels?
.
So I re-coiled it with 28 gauge and again missed my target but hit the sweet spot I guess, 1.1 ohms.
Target was 0.9 ohms but the 1.1 is real good for the amount of liquid that can be feed to the coil.
I don't use the o-ring, no ss wick here, cotton forms to any shape of hole
Do you guys mess with the juice control at all or just close it snug? I'm getting a tad bit of burnt taste, but massive vapor production. Still trying to get it perfect.
Also, I believe you widened your channels with a Dremel, correct? Thinking about doing that myself...
- Status
Similar threads
