Fogger V4!!

[TheKiwi]

So interesting thing.

I overtightened my fogger, and now the top chimney piece is permanently stuck to my top cap no matter how I try to unscrew it. (It's stuck and refuses to budge one bit)

Sounds like a bad thing right?

Nooooope! Now I can actually turn my atty upside down, and unscrew the base to mess with my coils. How awesome is that?!

Even better when I remove the drip tip: the topcap is flat on top, so I can just set it down with no mess. Heck if I wanted to, I just put my juice into the topcap before screwing on the base. No need to mess with my fill hole.

What a terrific misfortune


Burping out loud using Tapatalk

 

[Tbev]

I just noticed that on my 4.3 I was thinking about making it permanent.... Sounds like a good idea

Sent from my Transformer TF101 using Tapatalk

 

[TheKiwi]

I just noticed that on my 4.3 I was thinking about making it permanent.... Sounds like a good idea

Sent from my Transformer TF101 using Tapatalk

It's great actually. I can easily fill up to 3+ ml on my 4.2(?) while pressing down the glass tube firmly, and just mess with my coil whenever I want to.

Considering converting all mine to that, although I'm not entirely sure what sort of glue / adhesive I could use.

The great thing is that there really isn't any loss of functionality going that route.


Burping out loud using Tapatalk

 

[DejayRezme]

VAPES LIKE A }*|%\*]€| CHAMP. currently at 27 watts on my zna30. AFC at the largest and tbh the vapor is pretty ridiculous.

Thanks for the pictures, have to try that! I'm waiting for some shiseido cotton, I didn't have much luck with 1mm ekowool above 18 watts so far.

 

[TheKiwi]

Thanks for the pictures, have to try that! I'm waiting for some shiseido cotton, I didn't have much luck with 1mm ekowool above 18 watts so far.

Good luck with that and let us know how it works when you've tried it!

I'm currently nearly through with the 2nd tank of juice, still hitting like a champ and no off taste or anything to indicate burnt cotton or gunked up coil. It's been working well for me and i hope it does for you too!


Burping out loud using Tapatalk

 

[Binigo]

BAD:
Anyone wanna trade a version 4.2 for this POS version 4.3? I don't like the fill hole and I really don't like the capacity! That WAS one of the big draws for me: fill it one time and vape all day. Now they've made it a big tank that won't last all day, so you have to carry a syringe with you because it's hard to fill. And shame on you if you have to adjust the wicks, there's no draining a thick juice out of these things without making a mess!

GOOD:
Vapes really well. I think I like the flavor with the larger chamber better than the first 2 versions.

Oh yeah, the larger deck didn't really seem beneficial to me, so I didn't put this in the good or bad category.

EDIT:
I added a couple of fill holes in the top so I can fill it with just about any bottle style, which worked out great...but it still doesn't hold enough fluid, and now my $35 tank is now about $135 tank!
View attachment 338406

I have the V4.3. It works really well with how I build it, after the initial fill that is... It floods through the airholes a little bit, but once I vape it, it doesn't flood until the next fill. This issue keeps me from loving how the Fogger V4.3 functions.
I agree with you, it vapes really well at sub ohm's (personally I build it between .4 - .5 w/ 26g), no dry hits, but disappointed with the reduced juice capacity. I don't have an older version yet, I have one coming in, and from what I read on FT is the V4.3 holds around 2 mil's less.

I did some hunting around the past two days for an older version. I only found two places. I'll link them below incase you or anyone else is still looking for the old version that holds 5 mils with the reduced chamber and deck.

E-bay Vendor I asked this guy to post pictures of the deck and he did. I was turned off b/c the positive block appears copper, if that doesn't bother you guys than have a go at it I guess.

I ordered my 4.2 here I e-mailed this vendor and asked them if they had the version that's posted on their web-site which is 4.2. Their response: " Thank you for reaching out to VaporBeast.com! To my knowledge, we have the same version as is shown on our site. If we do receive a newer version from our vendor, they will let us know. Thank you and have a great day!" It's a little bit of a gamble but I'll let ya'll know if I actually do receive the 4.2 or older.
I used Coupon Code "YEAHBABY" which doesn't expire for free 10% off.

 

[Binigo]

How 'bout some more, new build photos gang? I've got one of these coming finally and I'll probably need assistance.

I grabbed this build on an FB group. It vapes great, I'm very happy with the flavor and vapor. I've been building at at .41 with 26g around a 3/32 with no dry hits.

One con I do have to mention with mine is it slowly leaks out the air holes right after filling the tank... until I vape it. After 2-3 pulls the leaking stops completely until the next fill. Every fill is annoying and I rush to vape it. Other than this I have no issues with it.

Credit to Logan Miller (I don't know him but thanks)

Fogger V4.3 Build

 

[TheKiwi]

OOohhhh interesting.... He doesn't push wick down the channels... Excellent gonna hafta try this


Burping out loud using Tapatalk

 

[DejayRezme]

Would it be risky to drill out the juice channels some more or can "too big" juice channels always be compensated with more wick in the channel?

 

[TheKiwi]

Would it be risky to drill out the juice channels some more or can "too big" juice channels always be compensated with more wick in the channel?

I would imagine that it could work well, considering that's how the aqua works.

The aqua has seriously fat and deep juice channels, and you actually need to shove a good amount of wick into it

Burping out loud using Tapatalk

 

[dwcraig1]

Would it be risky to drill out the juice channels some more or can "too big" juice channels always be compensated with more wick in the channel?

Drill? I used a Dremel and have achieved my desired results.

 

[zipflint]

Thanks for posting the link. That looks like something I can easily attempt.

I grabbed this build on an FB group. It vapes great, I'm very happy with the flavor and vapor. I've been building at at .41 with 26g around a 3/32 with no dry hits.

One con I do have to mention with mine is it slowly leaks out the air holes right after filling the tank... until I vape it. After 2-3 pulls the leaking stops completely until the next fill. Every fill is annoying and I rush to vape it. Other than this I have no issues with it.

Credit to Logan Miller (I don't know him but thanks)

Fogger V4.3 Build

 

[thorn]

A little leak after a fill? Who doesn't vape-to-test right after a fill anyhow?

 

[Dochartaigh]

Getting mine delivered tomorrow.

We REALLY need a nano kit for this beast. My Taifun GT just sits at home because it's huge (and is pretty much the same size as the Fogger V4)...but at least there's a nano kit for the GT (on order) so I can actually bring it out of the house.

 

[Tbev]

I was never a fan of the nano kit, the cool thing about the Fv4 is that it holds a lot of juice,.. That being said, they kinda siht the bed with the big deck...

Sent from my Transformer TF101 using Tapatalk

 

[jpcwon]

So, I just got my Fogger V4.....DOA....

One of the screws in the screw terminals just keeps spinning & spinning....looks like the female-end of the terminal is stripped.....well that sucks, I was looking forward to using this thing!! Now I just gotta hope the Ebay seller accepts my request for a return!!

I just had one question: Are any of you guys running 26ga in this? Seems like the Screws are too small to permit it.....could be wrong though, I didn't even have a chance to try!!

 

[Tbev]

I had the same problem and I used the spare out of the bag and it worked fine, give it a shot, I think 28ga is the biggest,, well that I've seen

Sent from my Transformer TF101 using Tapatalk

 

[jpcwon]

I had the same problem and I used the spare out of the bag and it worked fine, give it a shot, I think 28ga is the biggest,, well that I've seen

Sent from my Transformer TF101 using Tapatalk

Ahh, didn't even think to try that!! I will give it a shot tonight....thanks for the tip!!

 

[zipflint]

Got mine today. I'm not sure which revision it is, but I like it! A lot. No real problems during/post-build either. No leaking. No dry hits even. It's at about .8Ohm. 28 gauge kanthal. Looks perfect on a black Nzonic clone.

 

[Tbev]

Yeah bud, you built it perfectly!

Sent from my Transformer TF101 using Tapatalk