Fogger V4!!
- Thread starter Shofixti
- Start date
- th_trl_thread_readers 0
- Status
The Fogger isn't packaged with a steel tank. However they do offer a stainless steel tank and also replacement glass tanks. About $10 for either, harder to find than the atomizer. I've seen them at the frog I believe.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
60vg.......
im using rayon and when the chimney goes on i take a thin dental pick and spread the wick away from the juice channels.
to be honest, i dont think i would have tried this with cotton.
Rayon really steps the game up, that's dope bro!
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
I'm sorry but that's bs, same thing with my eXpro. Why do they do that! Svoemesto got the right idea to include that stuff. Even hcigar does it and it's a clone. Seriously I'm just like wow lol..
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I think he's referring to having to buy a stainless tank separate.
I completely disagree tho... Clones come with extras 'cause the authentics do. The authentic kayfun comes with both since plastic isn't acceptable for all juices, and they don't wanna limit the sale of a $100+ atty to people that are using "plastic friendly" juices. The fogger is a cheap authentic that will work with any juice. Personally, I prefer the glass since it lets you see your juice level. I'd rather the people that want a different tank have to buy it separate than having to pay more for the atty since it comes with an add-on that I would never use.
Okay... so I finally got the coiling correct on this thing. No more hot spots at all.
Currently using dual 10-wrap nano coil reading @ .8Ohms at trying to vape this thing at 30W.
It doesnt work :/. I use 60VG/40PG Juice and viscose (basically rayon) balls as wick. I can only take max 1-1.5s hits before i get a burning/dry taste because the wick can't keep up. I got the 4.3 Fogger with the worse air channels.
Anything i can do to fix this? I've read about people vaping high VG juices at sub ohm levels and not having problems, so I must be doing something wrong, right?
Currently using dual 10-wrap nano coil reading @ .8Ohms at trying to vape this thing at 30W.
It doesnt work :/. I use 60VG/40PG Juice and viscose (basically rayon) balls as wick. I can only take max 1-1.5s hits before i get a burning/dry taste because the wick can't keep up. I got the 4.3 Fogger with the worse air channels.
Anything i can do to fix this? I've read about people vaping high VG juices at sub ohm levels and not having problems, so I must be doing something wrong, right?
Did you wick more like a Kayfun or Aqua? For a thicker juice I'd only put at most 2 threadings worth of wick into the juice channel. You definitely don't want to be trying to fill them. Next I'd try with the tails over the channel and nothing actually in the channel.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Ten to one your over wicking, pics? Pics of dry fibers if not Sally's.
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
Okay... so I finally got the coiling correct on this thing. No more hot spots at all.
Currently using dual 10-wrap nano coil reading @ .8Ohms at trying to vape this thing at 30W.
It doesnt work :/. I use 60VG/40PG Juice and viscose (basically rayon) balls as wick. I can only take max 1-1.5s hits before i get a burning/dry taste because the wick can't keep up. I got the 4.3 Fogger with the worse air channels.
Anything i can do to fix this? I've read about people vaping high VG juices at sub ohm levels and not having problems, so I must be doing something wrong, right?
Hey mate,
I tried all wicking options available on my Fogger v4.3, the one with just vertical channels and large deck. The only way that works for me is to cut the wicks very short, put your scissors against the deck, saturate the wicks with juice, put on the chimney and then with a small 1.5mm screwdriver or something lay down the wicks on top of the channels, and I mean, LAY DOWN, DO NOT STUFF THEM, if you stuff them you're done for.
Do that and it vapes brilliant!
Okay... so I finally got the coiling correct on this thing. No more hot spots at all.
Currently using dual 10-wrap nano coil reading @ .8Ohms at trying to vape this thing at 30W.
It doesnt work :/
Who is forcing you to vape it 30W? You could bring down the wattage of your device to 20W or even less before changing you wick and listening to all the suggestion above.
I have this same tank and have it working like a beast. But I found that no wick in the channels at all, will cause leaking out the airholes when laying on its side. Just a thought.
I have absolutely no wick in the channels, and I haven't had a leak in weeks! (.67ohms@20watts all day every day)
Could someone with a metric caliper or micrometer, measure the outside diameter of a good 510 threaded connector of any atomizer?
I'm in my truck and don't have my micrometer with me. I'm still dealing with YiLoong and their Big Fogger wrong sized 510 threaded connector.
YiLoong just responded to me. They say that the current production is 6.81 mm
But if my memory serves me right 510 = M7 X 0.5 mm. Therefore it should be 7.0 mm in diameter.
Could you please measure it for me?
I'm in my truck and don't have my micrometer with me. I'm still dealing with YiLoong and their Big Fogger wrong sized 510 threaded connector.
YiLoong just responded to me. They say that the current production is 6.81 mm
But if my memory serves me right 510 = M7 X 0.5 mm. Therefore it should be 7.0 mm in diameter.
Could you please measure it for me?
I never had an aqua.. i just tried what people suggested. I'll try it more like what you suggested.
@EDO
Nobody is.. i just like it that way. But even at 15-20 i have the same issue, just a few seconds more.
Where are those metallurgists when you need one? They are here to criticize all the time...
I've got my answer. I stooped by Lowes in Texas and measured a Genuine Kayfun. It is, in fact 0.271 Inches which is 6.87 mm in diameter.
The Big Fogger featured in my video is 6.47 mm. No wonder it falls out of the Mod. But it came from the same people who said that Fogger 4 Plus holds 6 ML of liquid...
P.S: M7 X 0.5 Tap and Die is what everyone has to invest in, if we are buying stuff from China. IMHO
I've got my answer. I stooped by Lowes in Texas and measured a Genuine Kayfun. It is, in fact 0.271 Inches which is 6.87 mm in diameter.
The Big Fogger featured in my video is 6.47 mm. No wonder it falls out of the Mod. But it came from the same people who said that Fogger 4 Plus holds 6 ML of liquid...
P.S: M7 X 0.5 Tap and Die is what everyone has to invest in, if we are buying stuff from China. IMHO
Last edited:
- Status
Similar threads
- Locked
