GG Model Size Comparison - UPDATED

Status
Not open for further replies.

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I purchased a 901 to 510 adapter on the Silver Bullet webpage .. AltSmoke.
Besides his PVs he has several different adapters .. really pretty ones to. You can size up or down. I like the 510 on my GG .. can make it VERY SMALL !!:D

With GGTS you will not need adapters any more because 801 cap is already on GGTS as 901 is. With my new atties (same threads to 901 like 801) I will put on GGTS the 510 cap too so no adapters any more.:)
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
Thank you very much imeo... I look forward to many years with my new Ferrari. Any day now I will hold THE GG Tele in my hands and marvel at the work that went into such a work of art.

Many thanks to Lisa for the warm welcome.

Vanp, you are the owner of the first GTTS. It was made for testing reasons. I have made some changes to it. It works fine, but if you need more choices or you see something wrong on it I will change it with a new GGTS for you.:)
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
When the GG fails to work always check the obvious. The atomizer first. Make sure also that everything is clean. Once I let an adapter sit for a while and it needed cleaning. I hope this helps. With a GG it is always something very simple. It just can't wear out. I hope this helps.


Good to see you Vapnaway.

One serious reason that I build it this way Stormy, thanks for reminding this to all people. GG will not work because it needs cleaning only or its an atomizer's or a battery's fault.
 

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
When the GG fails to work always check the obvious. The atomizer first. Make sure also that everything is clean. Once I let an adapter sit for a while and it needed cleaning. I hope this helps. With a GG it is always something very simple. It just can't wear out. I hope this helps.


Good to see you Vapnaway.


this is excellent advice----
may I also add this-----------

check your 801 adapter --
in the centre there is a metal rod that moves up and down to make connecton between atty and atty connector

make sure that the connection is being made,
I found that my little metal rod was sticking sometimes, and so no connection was being made

hope this helps you ------

I am thrilled to bits with GG Trans and adapter and 801 atty -
the vape is fogging !!!!!!! 8-o8-o
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com

this is excellent advice----
may I also add this-----------

check your 801 adapter --
in the centre there is a metal rod that moves up and down to make connecton between atty and atty connector

make sure that the connection is being made,
I found that my little metal rod was sticking sometimes, and so no connection was being made

hope this helps you ------

I am thrilled to bits with GG Trans and adapter and 801 atty -
the vape is fogging !!!!!!! 8-o8-o

Ab has an adapter from a different suplier sweety, so you cant help him, I cant help him too.:)
 

vapn

Vaping Master
ECF Veteran
Jul 10, 2009
3,457
525
UK
Vanp, you are the owner of the first GTTS. It was made for testing reasons. I have made some changes to it. It works fine, but if you need more choices or you see something wrong on it I will change it with a new GGTS for you.:)

Wow, that sure is a nice offer. I will keep that in mind. But I feel like this is a collectors item. One that I may just put behind glass and look at. lol... jk...

But anyway, thanks for the offer. And I might just do that. We shall see.
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
Wow, that sure is a nice offer. I will keep that in mind. But I feel like this is a collectors item. One that I may just put behind glass and look at. lol... jk...

But anyway, thanks for the offer. And I might just do that. We shall see.

Anyway my friend. But if you want to keep that too, then I will send you a new one much cheaper:)
 

vapn

Vaping Master
ECF Veteran
Jul 10, 2009
3,457
525
UK
Anyway my friend. But if you want to keep that too, then I will send you a new one much cheaper:)


That sounds like a plan... Thank you very much... I will get back to you on that. FOR SURE. But this was Crash's ultimate vape so it may just be mine too. I may not ever need another PV again... . But for my collection I might ... lol...
 

Quit4myKids

Senior Member
ECF Veteran
Verified Member
Jun 18, 2009
95
22
59
San Jose, CA
I haven't purchased a device since my original M401 at the beginning of 2009. I've become addicted to modding, and have made 801 housings from juice boxes, PVC pipes, copper pipes, brass pipes, Lenmar portable battery packs, and even a 9V battery casing. I've vaped directly from a 9V battery, a 6V lantern battery (that's a powerful vape), 6V (2xCR2s), 5V (w/regulator), 3.7V, and even stacked AA and AAA sets. My current favorite is my brass 801 pipe mod with an 18650, which seems to vape better than my 5V mods, but I still have to drip, because I haven't solved the liquid feed problem (yet).

I've never before seen a product that I haven't thought to myself, "I can build that, or perhaps something better"... until now. I want the GGTS+AFS so bad I would consider trading just about anything (except perhaps my wife and kids) for one. I've been following this thread closely, and keep looking for an opportunity to get my hands on a GGTS. When I saw Crash's thread about selling his because he needed transportation funds, I flew to the thread, but VapNAway beat me to it (damn flu had me sleeping for a day).

<begging>
Imeo, you are clearly miles ahead of anyone else in your concepts and product development skills. I'm in no rush, other than my own impatience (a trait we apparently share), but I really want to get my hands on one of these miraculous devices, even if it's a prototype. Any chance of selling or auctioning some of the pre-production units you have laying around?
</begging>

Q4mK
 

Lisaf01

Unregistered Supplier
ECF Veteran
Jun 22, 2009
4,515
394
UK
www.cremedevape.com
<begging>
Imeo, you are clearly miles ahead of anyone else in your concepts and product development skills. I'm in no rush, other than my own impatience (a trait we apparently share), but I really want to get my hands on one of these miraculous devices, even if it's a prototype. Any chance of selling or auctioning some of the pre-production units you have laying around?
</begging>

Q4mK

Nice to meet you Q4mK. :)
Sorry you missed out on Crash's sale - I would have liked it too - to add to my collection but cash is a bit tight for me at the moment.

And join the queue for Imeo's miraculous creations, we're all extremely excited about the upcoming AFS and atties as well as the Telescopic. :D
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
Hi my new friend Quits,

I must thank you so much for your very kind words, you make me very proud and I will do more things if I have people like you to support me!

GGTS will come in a month as you already know. As for the auction, I let Crash to do it (I pushed him to do it!!) because he needs money for his long trip. But I cant do it for me because I dont want to put people's money in my pocket for a product that it will have a lower price than what people will give me. But you are a passion man as you already told me (I dont believe it :D:D, I am not too), so please wait a little longer and you will have the best, just wait a little more!:):)
 

Lisaf01

Unregistered Supplier
ECF Veteran
Jun 22, 2009
4,515
394
UK
www.cremedevape.com
ok, I'll do my best to live with the handful of devices I already have, and just trust that the end result will be worth the wait. Di, Story, and Lisa, I'm trusting you....
We all have high standards, you won't be disappointed!


Maybe you could appease me by letting me be a beta tester for something?

Q4mK
There's a queue for that too.......:D
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
ok, I'll do my best to live with the handful of devices I already have, and just trust that the end result will be worth the wait. Di, Story, and Lisa, I'm trusting you....

Maybe you could appease me by letting me be a beta tester for something?

Q4mK

Hi again my friend quit4,

Crash was testing GGTS for 2 months now, and I was doing the same. GGTS is an exellent device with no mistakes, so there is no need for beta testers. I would like to satisfy you but the only way is to wait just a little more. :):)

And yes there is so big queue for this but I cant satisfy anyone yet, but very soon!!
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread