GG series o-rings guide

[ammarhamidi]

Hi Para,

I dont understand the size that imeo post on the first page.Is that in inch or ?

2/2 and 4/1,5 or 2x3/1,8 around ceramic

Thats in Metric,but is it in mm or cm ? or lets say 4/1,5 ... 4 is the outer diameter and 1.5 is inner ? im confuse.

Tim Tam as in the choc biscuit ? thanks mate.

 

[ainako]

ammar, the measurements of the o-rings are all in mm. The first number is the inner diameter and the second is the cross section/thickness of the o-rings

On another note, Imeo mentioned that an optional o-ring can be used inside the top cap. I think the size was 17/1 but that seems a bit big to me and would like confirmation on the size from the family. I'm having leaking issues on my second iatty and am trying everything I think of to cure it from its .........

 

[silentt]

Just ordered so many o-rings for my ufs/avs/ggts and other non-gg related tanks.

 

[P3ST1L3NC3]

here are the mcmaster part numbers i ordered for my SS GGTS.
Line McMaster
Part Number Description/Customer ID # You
Ordered We
Shipped Balance
Due Unit
Price Extended
Amount
1 9262K132 Metric Buna-n O-ring 1.5 Mm Width, 17 Mm Id 1
Pack 0 1 $7.77
Pack $7.77
2 9262K642 Metric Buna-n O-ring 1.5 Mm Width, 21 Mm Id 1
Pack 0 1 $7.79
Pack $7.79
3 9262K106 Metric Buna-n O-ring 1 Mm Width, 14 Mm Id 1
Pack 0 1 $7.00
Pack $7.00
4 9262K126 Metric Buna-n O-ring 1.5 Mm Width, 9 Mm Id 1
Pack 0 1 $5.72
Pack $5.72
5 9263K283 Metric Viton(r) Fluoroelastomer O-ring 1 Mm Width, 2 Mm Id 1
Pack 0 1 $2.47
Pack $2.47

i would have gotten the 100 pack of buna-n 2mm ID x 1mm width, but they would have had to ship em from a different warehouse and would have shipped slower so substituted the flureo's for those.

hope i got the right sizes!!

EDIT, forgot to mention, i have 510 top cap. didn't order rings for the 801 or whatever the other top cap is.

 

[P3ST1L3NC3]

heres the mac master # for BUNA-N o rings that i substituted with the Fluoroelastomer O-ring's

Buna-N
ID,
2 mm Pkg.
Qty. 100 Per
Pkg.
1 mm Wide
9262K101 $4.38

 

[Torqueguy]

Thanks for taking the trouble to do this bud, and thanks for all you do.

here are the mcmaster part numbers i ordered for my SS GGTS.
Line McMaster
Part Number Description/Customer ID # You
Ordered We
Shipped Balance
Due Unit
Price Extended
Amount
1 9262K132 Metric Buna-n O-ring 1.5 Mm Width, 17 Mm Id 1
Pack 0 1 $7.77
Pack $7.77
2 9262K642 Metric Buna-n O-ring 1.5 Mm Width, 21 Mm Id 1
Pack 0 1 $7.79
Pack $7.79
3 9262K106 Metric Buna-n O-ring 1 Mm Width, 14 Mm Id 1
Pack 0 1 $7.00
Pack $7.00
4 9262K126 Metric Buna-n O-ring 1.5 Mm Width, 9 Mm Id 1
Pack 0 1 $5.72
Pack $5.72
5 9263K283 Metric Viton(r) Fluoroelastomer O-ring 1 Mm Width, 2 Mm Id 1
Pack 0 1 $2.47
Pack $2.47

i would have gotten the 100 pack of buna-n 2mm ID x 1mm width, but they would have had to ship em from a different warehouse and would have shipped slower so substituted the flureo's for those.

hope i got the right sizes!!

EDIT, forgot to mention, i have 510 top cap. didn't order rings for the 801 or whatever the other top cap is.

 

[blobe]

and finally, where do you order those in europe ?
my center pin orings are ....ed up

 

[gredie]

Hi blobe,
until now, i found just one source for o-rings her in Europe which is well sorted and not expensive.
Hug-Technik

The bad news are, this shop is just in german language available as this is a german company.

 

[blobe]

Ty mate, i'll check them, if not i'll order in usa
this one seems good, but i'll pay 10 times the product price in shipping...
https://www.oringsusa.com/catalog/index.php?cPath=482_488

 

[gredie]

I know, they're asking a fortune for shipping from US to EU.

 

[blobe]

i kinda want to die.. on this german page beside being extremely slow it's overpriced by a ton and you have to order rings per 20...
Then i tried this us store.. 5$ in orings 95$ in shipping lol. .... them

Where can you buy them, in like 10's ?


even if it's in the usa or uk or whatever

 

[gredie]

Blobe, you don't have to order rings per 20 or more at the german store. You can order any amount you want.
There is just a fee of EUR 4,70 when your order amount is below EUR 15,-.
This is noted on the right side of their page - in german

 

[blobe]

Well i couldn't order less than 15 per size
BUT
i found this
https://www.theoringstore.com/

I ordered like 40-50 orings + Shipping for a grand total of 26€ shipped

i'll let you know if it was fast but i feel better now

 

[gredie]

Strange, but I'm glad you found a solution. 26€ is not to bad, the other store in the use asked way more for shipping..

 

[danks]

I'm trying to determine the size of 2 o rings I need for my UFS v2, I found pieces of the originals stuck around the pin... I'm not sure I'm reading the right size from Imeo's post but these are the two small o rings that go around the pin down at the base. On the wiki link for the UFS the very last diagram has the two o rings I'm referring to labeled number "4". My UFS seems to be working ok without them but I fear over time I can get liquid into the battery chamber.

 

[Zoranth]

Those 2 o-rings are 2mm (diameter) x 1mm (Cross Section). The size of the o-ring is listed in the parts list on the diagram you are referencing.

 

[danks]

Those 2 o-rings are 2mm (diameter) x 1mm (Cross Section). The size of the o-ring is listed in the parts list on the diagram you are referencing.

Thanks I wasnt sure if I was reading it right. I got an o ring assortment a few months ago for odd jobs and never opened it yet, time to have a look!

 

[Major]

Yes that is one size I order in quantity (the 2mm x 1mm). There is absolutely no substitute for having them on hand when you need them. Being pretty OCD about some things like that, I try to make sure I have a minimum of 6 full sets for each GG device.

At the prices of them, it is one luxury to be able to have too many on hand. I personally use oringsUSA .

Their per piece prices are lower than the O-Ring store but they make it up on the shipping. I do like the fast shipping and well documented (size and quantity) thick plastic zip lock baggies they use as well. It's really just a matter of psersonal preference though as long as you have what you might need on hand!

 

[utal]

Great! just buy all o-rings needed =)

the only one that I don't find is the 1,78x1,78.

Thanks, I'm really happy of being part of this and to understand what you guys feel with GG stuff (the Ody upgrade is simply awesome!)

Yes that is one size I order in quantity (the 2mm x 1mm). There is absolutely no substitute for having them on hand when you need them. Being pretty OCD about some things like that, I try to make sure I have a minimum of 6 full sets for each GG device.

At the prices of them, it is one luxury to be able to have too many on hand. I personally use oringsUSA .

Their per piece prices are lower than the O-Ring store but they make it up on the shipping. I do like the fast shipping and well documented (size and quantity) thick plastic zip lock baggies they use as well. It's really just a matter of psersonal preference though as long as you have what you might need on hand!

 

[mucbaerchen]

This is very helpful for GG fanatics.. thanks imeo! Keep on rocking
lg muc