GLASSMANOAK'S Contest Thread #140 for WINNERS and with MULTIPLE WINNERS !!

[SLM]

4/25_#6

4/25 #3

I am using Innokin tanks, 2 of the I sub G and 1 I sub S, I am also using Sub tank nano right now, however I do have the Sub tank mini

Any of those should be just fine on the Pico. The only real restricted is diameter as the battery cap sticks up. There's not much room for anything over the 22mm diameter of the iSub or Subtank Mini without putting a heatsink on to raise the tank up.

@fatum I sure like the little tree in your signature, wonder does that qualify you on every post.... probably not since it is not in the post.

Maybe it's just me or the way I have something set but signature lines don't show up for me on my phone. I didn't know @fatum had a tree in his.

Positive thoughts sent out @Vaping!!!Jables Good luck on your interview!

Not a bad day here. A little tired but eh, who isn't? LOL! Work in the morning tomorrow so I at least get off earlier. But it's supposed to rain and storm. Maybe I'll actually do that relax thing... LOL!

Catch y'all later!

 

[philbh]

#1 - 4/25/2016 - I should've known it wasn't going to work out between my ex-wife and me. After all, I'm a Libra and she's a ......

Sent from my A1-840FHD using Tapatalk

 

[jpf880]

#3
4/25

Good Vibes and Prayers coming your way @Vaping!!!Jables !


G'Nite Uncle!

 

[liblue1]

#1 - 4/25/2016 - I should've known it wasn't going to work out between my ex-wife and me. After all, I'm a Libra and she's a .....

Sent from my A1-840FHD using Tapatalk

Welcome to the Treefam philbh..........

Welcome to the Vape Tree...The best thread of ECF………….

Good luck @Vaping!!!Jables ...........
Good night Treefam..........

 

[rangerrobin]

NAE

4/25#1 Hey guys been real busy glad to see everyone. My bachelor nano came in today from @AlmightyEvan at Heavens gifts. I love it it's a good MTL. I hope the treefams well. Cu guys tomorrow. Oh BTW if y'all could send good vibes my way I'd appreciate it. I have an job interview tomorrow, my family and I. Could really use it . Well then goodnight and stay safe y'all.

San Antonio,Texas

Sorry, I missed this earlier, I was in vape mail heaven.

Good luck, tomorrow!

 

[rangerrobin]

15 min rule
NAE

Good Night / G'Mornin' and Good Vibes Tree Fam!

 

[SLM]

4/26_#1

Welp, finally going to bed... I wrapped a new coil for one of my Subtank RBA decks and everything seemed fine when I checked it on the meter and then on the mod. Got it all set, wicked it up and... Bam! Immediately a dry hit! Did a couple no power draws on it, and tried it again with the watts cut way back and yep, you guessed it... kinda dry again. Tear it down, looked it over and it looks good. Yank the brand new wick, rewick, recheck resistance... It all looks good. Rejuice it and whack! Dry! Again I tear it down, tripple check everything... ohms looks good, wick looks good, etc. What the heck! Screw it back together, put it on the mod and bump the fire button... .13 ohms on what's been showing, and should be, a .55 or so coil... Take whole tank off mod and screw it all on meter and yep, shows .13 Okay... W. T. F. Is going on??

Turns out the center air tube is too long on my overgrown 9ml tank. It's going down in and hitting the coil causing a short. Now what? Okay... Take the glass off and chuck the metal up in the mini lathe and use a drill bit to shorten the tube and an outside deburing tool to redo the chamfer. Put it back together... Again. And now it's at .56 ohms, just like it should be.

I never ran into this issue because I've been using 2mm ID for my twisted or Clapton coils or 3mm on single strand tensioned coils. This build is a tripple twisted 3mm so it has a larger OD and it was just enough to contact the air tube.

Anyway, finally got it sorted and now it hits very well again. So much for being in bed early but I wasn't giving up until I figured out what was going on. At least it's done and now so am I, LOL!

Goodnight Treefam. Catch y'all tomorrow.

 

[Mandikay]

4/26 #1
Good morning everyone. I slept like a baby last night
Bout to wake up the girls and head to work, I'll have to catch up a bit later.

 

[philbh]

#1 - 4/26/2016 - substance

Sent from my A1-840FHD using Tapatalk
I've been notified that my substance isn't sufficient. Now that we have clarified the rules, let me say that no one is lazier than me except for my dog. My youngest daughter is a close second. Can't even get her to flush the toilet consistently.

 

[tiggerrts]

4/26 - 1: Good morning all, time to roll; have a good one.

So yesterday the boss does a quick oops your going out of town, good thing I have taught the boys to come prepared as the newest bailed me out at lunch. Anyway, I get lined out and do my first chores and then lined out for the second set. Oh no wait do this instead as the boss has to leave. Thanks for letting me take over that at the hardest part; like usual.
"Hey what to would you like from Texas Tea." "I have never had tea from Texas Tea." "Do you like this flavor or that?" "I have never had tea from Texas Tea." "Do you like tea?" "Yes." Good grief please focus, "I should be back in two hours." "Why don't you give me my check just in case." Fast forward to the end of the day, with no service by my phone and the boss' supplies left behind, do I pack it up or leave them? New employee texts him at the end of the day. The boss' response "Hey guys, would you like pizza for dinner?" Ignored and we went home. Time to roll earlier to the same place, let the game begin.

 

[Mandikay]

4/26 #2
You would think after sleeping like I did last night I wouldn't be thoroughly exhausted... But nope I still feel like I can barely hold my eyes open!!
Good luck on your interview @Vaping!!!Jables

 

[ThaFuzz]

4/26#1
Sorry about the wife thing @philbh .
Marriage is a tough thing. Lots of stress and sometimes a lack of communication makes it worse. Or a miscommunication (men and women seem to speak very different languages sometimes). Best of luck in your future endeavors .
@Vaping!!!Jables good luck on your interview. I hate job hunting like i hate moving and needles. But sometimes you have to do it. Drink coffee, put on some gangsta rap , (i use B.I.G. "Juicy"to get psyched up for interviews)

and handle that ....also i use joecephus and the george Jonestown masacre "quitting time" when i resign or get let go

 

[DaleH1985]

4/26 #1

All this talk about interviews and new jobs. Kinda funny, cause I'm thinking I might start looking for a new job myself. Not that I hate my current job, I just don't seem to "fit in" with everyone else. Maybe it's because out of all the offices in my region, I am the only male sales associate. Makes for very little conversation to say the least. Hope everyone has a good day. Gonna try to stay awake and hopefully some business will roll in, but it's storming here so I doubt people will be out and about much.

 

[angelphyre]

4/26
1. Morning Treefam...fell asleep early last night and actually got some decent sleep, but like @Mandikay I'm still dragging...think I need a whole week of sleep to fully catch up!

 

[rangerrobin]

NAE

Good Mornin' / G'Night and Good Vibes Tree Fam!

4/26_#1

Welp, finally going to bed... I wrapped a new coil for one of my Subtank RBA decks and everything seemed fine when I checked it on the meter and then on the mod. Got it all set, wicked it up and... Bam! Immediately a dry hit! Did a couple no power draws on it, and tried it again with the watts cut way back and yep, you guessed it... kinda dry again. Tear it down, looked it over and it looks good. Yank the brand new wick, rewick, recheck resistance... It all looks good. Rejuice it and whack! Dry! Again I tear it down, tripple check everything... ohms looks good, wick looks good, etc. What the heck! Screw it back together, put it on the mod and bump the fire button... .13 ohms on what's been showing, and should be, a .55 or so coil... Take whole tank off mod and screw it all on meter and yep, shows .13 Okay... W. T. F. Is going on??

Turns out the center air tube is too long on my overgrown 9ml tank. It's going down in and hitting the coil causing a short. Now what? Okay... Take the glass off and chuck the metal up in the mini lathe and use a drill bit to shorten the tube and an outside deburing tool to redo the chamfer. Put it back together... Again. And now it's at .56 ohms, just like it should be.

I never ran into this issue because I've been using 2mm ID for my twisted or Clapton coils or 3mm on single strand tensioned coils. This build is a tripple twisted 3mm so it has a larger OD and it was just enough to contact the air tube.

Anyway, finally got it sorted and now it hits very well again. So much for being in bed early but I wasn't giving up until I figured out what was going on. At least it's done and now so am I, LOL!

Goodnight Treefam. Catch y'all tomorrow.

View attachment 549370

I've stayed up late trouble shooting things many times, so I know the compulsion. I'm glad you got your build figured out.

4/26 - 1: Good morning all, time to roll; have a good one.

So yesterday the boss does a quick oops your going out of town, good thing I have taught the boys to come prepared as the newest bailed me out at lunch. Anyway, I get lined out and do my first chores and then lined out for the second set. Oh no wait do this instead as the boss has to leave. Thanks for letting me take over that at the hardest part; like usual.
"Hey what to would you like from Texas Tea." "I have never had tea from Texas Tea." "Do you like this flavor or that?" "I have never had tea from Texas Tea." "Do you like tea?" "Yes." Good grief please focus, "I should be back in two hours." "Why don't you give me my check just in case." Fast forward to the end of the day, with no service by my phone and the boss' supplies left behind, do I pack it up or leave them? New employee texts him at the end of the day. The boss' response "Hey guys, would you like pizza for dinner?" Ignored and we went home. Time to roll earlier to the same place, let the game begin.

Nothing you share about your boss surprises me. However, I am proud of you for not losing your cool! I'd have quit, been fired or in jail a long time ago.

Have a terrific day, everyone!

 

[SLM]

4/26_#2

Good morning everyone. Back at work. Shorter day today, I had to come in a bit ago so out at 4:00 PM. Not bad I guess.

@rangerrobin Yea, I wasn't quitting until I figured out why it kept going sideways. I couldn't have slept anyway because it would have drove me nutz thinking about it!


Good luck and good vibes Treefam catch y'all later!

 

[CountBoredom]

Good morning, everyone.

Fingers crossed for your job interview, @Vaping!!!Jables!

substance

Welcome, @philbh! I'm sorry to hear about your marriage. I also understand how it can sometimes be intimidating to enter a new contest where it seems that everyone knows each other. Believe me, we've all been there. Perhaps you'd like to go back and edit your "substance" to something else so that it can count as a valid entry--and, while you're at it, stop and chat for a while.

 

[jpf880]

#1
4/26


Good Morningnite All!

 

[Uncle]

Well - "MoringNite" - "Tree People" . . .

. . . Start of a NEW DAY & NEW WEEK too . . .

Still havin' "My" COFFEE . . .

Hmm... good point. We'll have to take that under advisement... but I'd be inclined to agree with you, Tiggs, since the tree emo doesn't appear when the post is quoted. (Hint, @fatum, go back and add a tree pic to your post, just to be on the safe side! )

Gonna step in here, until we hear differently from the man himself - @glassmanoak / "GMO" . . .

YES - All Tree Pictures/Images/Emoticons - must be added in post to qualify for extra bottle of The Vape Tree E-Liquid - as the state . . .

However - If anyone really wants to add "The Vape Tree" banner in their signature line - Ya' never know when it may happen once again, but there may be a sub-contest for those that do . . . Just Sayin' . . .

See You All Later . . .

 

[angelphyre]

4/26
2. Who the heck decided to move Monday to today...because this sure is acting like a Monday for me! ...rolled my passenger window down in my car to get the dew off and now it won't go back up...thank goodness it's sunny out or I'd be in real trouble. Tried contacting my stepson about fixing it this evening, but of course he's not responding. Then get to work and manage to spill my coffee all over my desk. UGH!