Got my new GG. Now what?

[cryodream]

just don't do anything impulsive like buying these.. they're expensive and i'll feel responsible if you are stuck with bottles of stuff you don't like.

Are you serious? How can I not try it, after this:

cryodream, in my opinion, ecopure rich is the antithesis of most juices.. it simply performs like a real analog.

I have a feeling, I am gonna like it
Just ordered ULTRApure e-liquid 3ml 6-Pack and ECOpure RICH e-liquid 30 ml.
And they're not that expensive, aren't they even cheaper, than Ms T's? Anyway, if they really perform like analogs, I'll be vaping less, methinks. That sounds good.

@moonlight,
The brewery is out of stock on both Malty's. Will try it later. Thanks, for a tip. I'm always on a hunt for a good juice.

@Wylie,
Same here, I'm not cleaning attys at all, atm. Though I'm always thinking, maybe I should? bah...

Anywho, any recommendations maybe on something similar to get, until I'm waiting for UFS and iAtty? I am really fed up with juice leaking. I'm dripping al the time. I tried cartomizers for a couple of hours on the very first day (I ordered with my Inferno, or they came with it in a package, don't recall now), but I did not like them - too little vapor. Iirc, I tried a carto, thought...ehh, tried dripping and - goodbye smoking. But dripping = tissues everywhere The idea of UFS and that it collects the excess juice, sounds like a godsend to me right now.
I mean any alternatives out there? Or Imeo is the only genius in these parts?
(I hope I don't break any written/unwritten rules with asking about this.)

While on the subject, why Imeo doesn't have GG and parts mass produced by now? Exclusivity?

 

[eastman]

If u like cartos in the meantime you can get a liquinator from vaporescence to hold you over until you get a ufs, avs, or iatty. They work good and I wasn't a fan of cartos until this. Make sure u get the dual coil cartos. They hit almost like an atty.

Sorry if I shouldn't have mentioned another vendor here but I didn't think it would compare in any way to the quality of what imeo sells.

 

[Zoranth]

While on the subject, why Imeo doesn't have GG and parts mass produced by now? Exclusivity?

To be mass produced would mean not having complete control of the quality.

That would be like asking to have the Pagani Huayra or Bugatti Veyron or Lamborghini Reventon mass produced, if that were to happen, you would only end up with a really nice looking Yugo.

 

[Cacique500]

I highly recommend the UFS. No experience with the Iatty. Just got a UFS about a week ago off the classifieds and it's (to me) nothing short of a miracle piece of machinery. I do a lot of driving and the cart/tank leaking was driving me nuts. Haven't had ONE single issue with the UFS...it just works. Paid dearly for it, but I needed it *now* and have no regret$.

 

[fright88]

Anywho, any recommendations maybe on something similar to get, until I'm waiting for UFS and iAtty? I am really fed up with juice leaking. I'm dripping al the time. I tried cartomizers for a couple of hours on the very first day (I ordered with my Inferno, or they came with it in a package, don't recall now), but I did not like them - too little vapor. Iirc, I tried a carto, thought...ehh, tried dripping and - goodbye smoking. But dripping = tissues everywhere The idea of UFS and that it collects the excess juice, sounds like a godsend to me right now.
I mean any alternatives out there? Or Imeo is the only genius in these parts?
(I hope I don't break any written/unwritten rules with asking about this.)

While on the subject, why Imeo doesn't have GG and parts mass produced by now? Exclusivity?

My current backup to my iAtty is a MAP tank with 2.4 ohm R5 Ce2's. Granted I havn't tried a lot of stuff but this allows me to not have to fill every 30 seconds. Nice thing about it is with the 510-901 and 901-510 adapter and an o-ring I can use adjustable draw. The o ring means any leaks from the bottom go into the collector tank. And I never have leaks from the top unless I leave it on it's side for a long time. My Torpedo tank works well the same way but the Map's top is tighter so I worry less about leaking. Matches my GGTS really well though.

BTW really hope next shippment of UFS's is 98765432123456789 pieces.

 

[silentt]

The UFS is my favorite tank system ever, I absolutely love this thing. If that ever was disabled I would use my AVS and if my GGTS was disabled I would use my AFS or iAtty on my other PV's and hopefully they don't become disabled. You don't have to worry about GG's being disabled though, they are built to last forever.



edit: I said disabled a lot up there ^

 

[RippleInStillWater]

Here is what I use fwiw.........

GGTS + UFS, Joye LR510, 18650
GGTS + UFS, LR901, 18650
GGTS + Iatty, 2xTenergys
GGTS + AVS, Punched 808 carto, 2xTenergys
GGTS + AFSV2, Punched 808 carto, 2xTenergys
GGTS, Cisco 1.5, 18650
GGTB, Cisco 2.0, AW17670
Chuck, whatever, 3.7, 6, or 7.4V

In actuality only 4 are loaded for bear at any one point but the rest are always set up except for the batteries. If you get a GG tank system I highly recommend learning DIY, I go through copious amounts of juice!!!8-o

 

[Valsacar]

I highly recommend the UFS. No experience with the Iatty. Just got a UFS about a week ago off the classifieds and it's (to me) nothing short of a miracle piece of machinery. I do a lot of driving and the cart/tank leaking was driving me nuts. Haven't had ONE single issue with the UFS...it just works. Paid dearly for it, but I needed it *now* and have no regret$.

I've been enjoying my iAtty (even better on the GGTS), takes some playing but it's kind of fun building your own coils. Mailman just called, so I'm hoping that means my second GGTS and UFS are here, and third set (for a friend) coming in a week or so as well. He finally realized the ego just doesn't cut it, the leaking was the big part (as well as vapor production). He liked my iAtty, but I recommended the UFS since he's not too technical and building his own coils would probably put him off. After I get a day playing with my new GGTS/UFS, I'll let him borrow it until his gets here.

 

[fright88]

If you get a GG tank system I highly recommend learning DIY, I go through copious amounts of juice!!!8-o

This is soo true before GG I was a 2-3 ML a day vaper with my iAtty I am around 7-9. Just wish I could figgure out this DIY stuff.

 

[cryodream]

BTW really hope next shippment of UFS's is 98765432123456789 pieces.

Me too

If you get a GG tank system I highly recommend learning DIY, I go through copious amounts of juice!!!8-o

This is soo true before GG I was a 2-3 ML a day vaper with my iAtty I am around 7-9. Just wish I could figgure out this DIY stuff.

Wow, 3 times more juice? So is it because you simply chain-vape way more than before, because you don't need to drip?

Mailman just called, so I'm hoping that means my second GGTS and UFS are here, and third set (for a friend) coming in a week or so as well.

Where did you buy UFS? Unfair, me wanna too

Here is what I use fwiw.........
GGTS + UFS, Joye LR510, 18650
GGTS + UFS, LR901, 18650
GGTS + Iatty, 2xTenergys
GGTS + AVS, Punched 808 carto, 2xTenergys
GGTS + AFSV2, Punched 808 carto, 2xTenergys
GGTS, Cisco 1.5, 18650
GGTB, Cisco 2.0, AW17670
Chuck, whatever, 3.7, 6, or 7.4V

How many hands have you got, m8?

 

[fright88]

I think I just chain vape more now. I was just tired of filling every 10 minutes or so. It will probably taper down once the newness has worn off but I don't think I will ever vape below 5ml a day again lol.

 

[cryodream]

My current backup to my iAtty is a MAP tank with 2.4 ohm R5 Ce2's. Granted I havn't tried a lot of stuff but this allows me to not have to fill every 30 seconds. Nice thing about it is with the 510-901 and 901-510 adapter and an o-ring I can use adjustable draw. The o ring means any leaks from the bottom go into the collector tank. And I never have leaks from the top unless I leave it on it's side for a long time. My Torpedo tank works well the same way but the Map's top is tighter so I worry less about leaking. Matches my GGTS really well though.

I forgot to reply to the most imprtant part
This thing looks awesome, and cheap! Looked up a couple of vids about it - me needs that thing. Obviously CoV is out of stock Is this one as elusive as GG/UFS?

Thanks so much for a pointing me to this tank, fright88.

 

[fright88]

Hmm well he gets them in frequently. You could also try asking in the COV sub forum as Bruce is there all the time. You can also watch the classys or just plain post a WTB. I know I've seen a couple go there reciently.

Also on the Torpedo I think I probably just need to order a new tube and that will fix my top looseness problem but I have been lazy in doing so since I have been playing around with my iAtty. I bought mine second hand though and I have a feeling it was well used.