- Status
I wish I would have ordered a SS 18500 tube when I purchased the SS paps. Might as well make it worthwhile and get a flat top and extra switch.
Hey Perseas,
A few questions.
1) What will be the initial and future finish and color choices for the Paps X?
2) Will the first batch of the Paps X be sold together with the upcoming batch of the Picollo, GP Spheroid and Paps Lux/SS you mentioned in earlier posts?
3) I assume the top ring of Paps X is for the air-flow controller and the bottom the firing button - what's the one for right above, is it a Nemesis-style locking ring?
4) When will the GP Polisher & Brusher adaptor be available - I'm running out of cheap atties transformed into mod connectors for drills
5) What makes the Paps X better than the Lux?
Thanks!
1) Wait and you'll see it, we are still testing different finishes.
2)No.
3)No, it will be an evolved version of a GP Piccolo button.
4)PnB is already available.
5)They are different kinds of mods, who said that they are comparable?
So, typically... what can I expect when stock is replenished? Is it an announcement made in any particular place first, then the F5 battle begins?
I actually have a laundry list of items I'd like to purchase and would of course prefer that they be ordered all at once.
Perseas, is it possible to contact you with a complete order and have you hold shipment until all items are available? Not sure yet how you run things.
At any rate, looking forward to the GP experience!
Sorry buddy, I won't do it, it would be unfair for the rest people and if you imagine this request multiplied a few times, then you'll understand why I don't make booking. Stay tuned for our advanced notification.
perseas will you be sending some of those PnB adapters to your resellers or should i just pick one up now.
I'm easily influenced
I'm easily influenced
I did that once... purchased all the Paps tubes... the 18500 was my fav... the right size and giving nearly a day. But soon reverted back to the base 18350... for couple of very personal reasons:
1. I loved holding the serialized device,
2. I like this form factor, super handy; and Paps v2.5 is the smallest too,
3. The v2.5 switch system made it also very versatile,
4. It also became the safest... and I could toss it into the pocket / anywhere,
5. The LUX became a game changer!
Gpaps Lux 0560 Checking in...just arrived today from Domo and stuck a Steamboy Stormrider in Titanium...One question tho, is there any polishes out there that is safe for this mod? I use Cap Cod for all my mods...
i mostly use 18490's at home and 18350's out of the house, i only use 18650's when setting up RBA's and I always keep one at half charge for that purpose. but i still have to order all tubes whenever I get a mod, Its an OCD thing and cost me a pretty penny with my 'velas.
LUX POLISHING, BY PERSEAS:
http://www.e-cigarette-forum.com/fo...tifications-tips-tricks-updates-thread-3.html
-Don't polish the Firing Button [below] -- it's GOLD!
-Cape Cod is just fine
-Don't scrub the contacts points -- GOLD!
Well, a bit of gurgle and A few dips after filling the tank but, all stopped soon after. Now almost 2 tanks down today with the Diver and I have loved it all.
I get a few drips of leaking and that also in my diver. But its no more then what's caught on my fill tool for a normal carto tank so I am not complaining at all. I also fill with a dropper since that's how vape syndicate juice somes. I just can't decide on getting another SnP or the dripper piece for my secound diver.
Sent from my SPH-L710 using Tapatalk 2
I really think it 80% of the time is the ceramic cup. The cups I have are from a GG iAtty and the seem to have a tight fit for the post but then I have to be careful not to dislodge the cup when pressing it down on the table.
I have plenty of NR/R wires welded but decided to set up with .30ga 4 wraps and think I am around 1.2ish ohms without NR wire on 1.5 ekowool cut at 2.5mm past diver base.
Are you talking about the Grail dripper? eees nice.
Hi Perseas,
It took 1.5hrs and lots of beer and cursing, but I finally got the Diver built and properly inserted into the SnP
But now i look at the 23mm rings and think, "DOH, why didn't i go for the caps that cover the o-rings?!?"
Will you be selling them separately at some point? I presume that the cap threading is compatible. Or do I need to order a new SnP 23mm when they come back in stock?
thanks!
It took 1.5hrs and lots of beer and cursing, but I finally got the Diver built and properly inserted into the SnP
But now i look at the 23mm rings and think, "DOH, why didn't i go for the caps that cover the o-rings?!?"
Will you be selling them separately at some point? I presume that the cap threading is compatible. Or do I need to order a new SnP 23mm when they come back in stock?
thanks!
perseas will you be sending some of those PnB adapters to your resellers or should i just pick one up now.
I'm easily influenced
Yes, I'll send them a few days after the upcoming batch.
Hi Perseas,
It took 1.5hrs and lots of beer and cursing, but I finally got the Diver built and properly inserted into the SnP
But now i look at the 23mm rings and think, "DOH, why didn't i go for the caps that cover the o-rings?!?"
Will you be selling them separately at some point? I presume that the cap threading is compatible. Or do I need to order a new SnP 23mm when they come back in stock?
thanks!
Yes, we'll sell them separately in the near future, they are compatible. The only difference, they may have is that when you change rings, they'll seal in a different point, not necessarily when you tighten completely the ring, but around there. The reason is that we cannot know where starts the first thread at each ring in relation to the top cap.
Last edited:
It depends on how many days we'll need to deliver the batch, then to prepare the reseller's shipments, we are a small team and everything is handled by us.
Copy that.
Not saying I wouldn't place an order through VA, just curious how long after the thread update I need to put the finger on the trigger through a reseller.
Small teams doing big things; there's something to be said about that.
- Status
Similar threads
- Locked
