OH!!! That is awesome. Even better though, I would be too afraid to use it if it were the tube.
- Status
OH!!! That is awesome. Even better though, I would be too afraid to use it if it were the tube.
I guess if I had taken the time to actually read that, then I might have understood it. lol 
Some pictures might help. Do you hear any battery shake? Are you sure the post on your 510 is protruded out enough?
Hey Amirite, you know what other pics might be good? A "family photo" of all your devices. Every time I see a post from you, I can help but read through all your devices.
I've made sure all the connection points have been cleaned with brass polish. I gave my mod a good thorough cleaning, rinsing, and drying, but it just isn't working.
I have no idea what it could be. Even when it was working, I'd get very inconsistent hits. Some hits would be hard, others weak. If I held down the fire button for long enough before taking a hit, I'd get more consistently hard hits, but that isn't normal right?
I've double checked all the connections, and everything is making contact. I even sanded down the positive post on my rsst. It works flawlessly on my sigelei, but it just doesn't want to work on my paps.
I initially thought it might be the coils I was wrapping, so I wasted like a meters worth of wire before I figured out it wasn't the coils. lol
I have a lux on the way, so I guess I'll at least have something to compare it to.
Oh well...
Screw down the positive post on the RSST so that its sticking out a good .5mm and try again please. It's a mechanical mod. If it fires on your sigelei, then it should fire on the Paps.
Also, are you using aw imr batteries?
You may have mentioned and Armirite eluded to this, remove your top cap. Unscrew both telescopic posts. Screw Atty in, now screw both Tele posts back in. The top/larger one should gap a bit. Now adjust the Tele that connects to battery nipple,
giggity.
How long have you owned the PAPS? There may be a short in the spring inside the switch but typically the button would warm up fast.
Edit - Perseas covered it as well, hence the title of King
You may have mentioned and Armirite eluded to this, remove your top cap. Unscrew both telescopic posts. Screw Atty in, now screw both Tele posts back in. The top/larger one should gap a bit. Now adjust the Tele that connects to battery nipple,
giggity.
How long have you owned the PAPS? There may be a short in the spring inside the switch but typically the button would warm up fast.
Edit - Perseas covered it as well, hence the title of King
Last edited:
A few mods were camera shy
I will give you a hundred bucks for the lot.
Great pic. Definitely jealous. Thanks for the Photo.I've screwed down the positive post on the rsst at varying lengths, so it's been jutting out anywhere from 0.5-1.5mm from the base of the 510 connector. Still nothing...
I'm currently using efest imr batts. I'm gonna drop by a local shop tomorrow to pick up some aw imrs.
At this point, I'm really hopefully it's just the batteries I'm using that's causing all these problems. lol
Is there really that big a difference between efest and aw imr batts?
Do you own a volt meter?
I've never had any issues with any of my Paps firing but I've only used AW IMR's. Didn't you say it fired when you first recieved the Paps?
Last edited:
Hi rumthin,
a) I see that u r from the neighborhood, if u desire u could come over to my place this weekend & I could try fixing it for u.
b) I use Efest IMR 18350 Button Top in my Lux, without any issues.
c) Did u disassemble & reassemble ur Switch mechanism? There could be a disconnection of sorts there.
Give me a shout if u desire.
Just got tapatalk. Here is the great SS Paps 2.5. The best.
That's a great image. The v2.5 SS looks sexy. Images like this made me go for it today
That's a great image. The v2.5 SS looks sexy. Images like this made me go for it today
I absolutely love this little guy. I think with this and my Caravela, the only other mod I want is the Silver/SS LUX. I love the look of the Bronze LUX, but I couldn't use it.
Yeah I love my SS 2.5. Picked up the LUX internal kit for it, just need the 18500 tube like in a bad way!
The holding nut's surface has to be lower from the firing pin, in other words, the firing pin must protrude slightly.
Flip the holding nut from the other side, if this isn't happening and check again.
Polisher and Brusher adaptor (PnB)
PnB adaptor is a small accessory we've designed for the people who want to brush and polish their mods with their Dremel or a device with a larger chock.
It has 2 parts, one part with male 510 connector for mods and the other part with female connector for atomizers.
It is for generic use, so we used 303 SS low grade for its construction, in order its threads to be harmless for mods and atomizers that aren't from 316 SS.
PnB adaptor is under production and soon it will be at Vapour Art Store. The photos above are from a pre production unit.
PnB adaptor is a small accessory we've designed for the people who want to brush and polish their mods with their Dremel or a device with a larger chock.
It has 2 parts, one part with male 510 connector for mods and the other part with female connector for atomizers.
It is for generic use, so we used 303 SS low grade for its construction, in order its threads to be harmless for mods and atomizers that aren't from 316 SS.
PnB adaptor is under production and soon it will be at Vapour Art Store. The photos above are from a pre production unit.
Last edited:
- Status
Similar threads
- Locked
