- Status
Btw, I misspoke earlier. It appears tubes are available at Domo. You just have to find them from the right area. The section I was looking at told you to select the tube type and then had no place to go from there. Keep looking until you find the page that has the white background instead of that horrible dark wooden one and order from there.
Love it! Team GP
That is absolutely sexy! Loving the look!
Sent from my iPhone using Tapatalk 2
I'm not sure what is the issue with Domo's website but I'm having hard time displaying it correctly in my firefox and chrome. Only managed to get it displaying it correctly on IE 10.
I can't get it to work on my iPhone. Won't let me finish the age restriction page.
Sent from my iPhone using Tapatalk 2
Well for crying out loud...Murphy caught me looking last night...
My air conditioner went out, living in Florida - oh heck no !
Gotta get it running !
My air conditioner went out, living in Florida - oh heck no !
Gotta get it running !
love my paps, but one of my buttons is a little messed up in that it fires when locked. Coincidentally this was the button on the mod my gf took with her last night, I showed her how the locking ring works. She came home and said the vape was really hot when she went to pick it up and it wouldn't fire. I tested the battery and it was reading 0.24volts, so that battery is now done as it won't keep a charge anymore. The negative post in the switch is at the same level as the plastic insulator for the messed up switch, so I can see why it's behaving this way. Should I just file it down? Anyone else fixed this issue that doesn't involve asking vapour art to send a new switch?
Well for crying out loud...Murphy caught me looking last night...
My air conditioner went out, living in Florida - oh heck no !
Gotta get it running !
Agreed! I can't even believe people lived here before the days of air-conditioning.
It depends. If you got the standard 2.5 SS then you can file it down, no problem. If you got the LUX, it has a gold plating and filing would compromise it. If that's the case, let Perseas send you a new button.
I have the same issue. When I try to access on my Mac, it flashes the screen after you put in your age, but takes you back to the age input screen again.
Sent from my iPhone using Tapatalk 2
What's this setup? Each piece?
...and where can I purchase one?
Sent from my iPhone using Tapatalk 2
Vapourart is down due to server adjustments. We're running a server upgrade and we're puting a few security upgrades to the code, when we finish, we'll be up again. Sorry, if that has caused any inconvenience.
GP PAPS lux, senesis brass, and drip tip... Hmmm I forget. It's a simple tip.
Senesis to my knowledge at this time can not be purchased, the list is closed.
...One more. I'm waiting on my stealth cap to really finish it off from DOMO.
What's a "stealth cap", VC?
Oh crap! I broke my ceramic today and slightly destroyed the 510 Post of the Diver
Wanted to make a NR-R-NR coil (just to see how it feels, plus had lotza spare time) and couldn't, for the love of God, remove the Diver from the SnP. "Tight Fit" is an understatement here! Tried all stunts possible, held the 510 post with pliers (which eventually destroyed its threads), twisted, pulled... the bloody thing wouldn't budge!
All it did is unscrew the coil section (which broke the ceramic cup) any which way that I tried. And putting it back bent the damn thing as well!
So how did I do it?
Finally, held the Tank against the kitchen top, with the 510 post facing the floor, and hammered the top end of the Diver. Yes, hammered it with the rubberized hand-grasps of a pliers and then could push it slightly into the tank. Popped in the Carto-tool over the Diver... continued to hammer it down and voilà!
Bottomline:
This tank, the SnP, is really well built. Holds the Diver with robotic zeal. I know ppl had issues fitting it as well, fortunately I had it easy then - but not while removing it! So folks, be careful. It's wise not to pry it in anyway except to push it down by tapping (aka hammering) it with the Carto-tool mounted atop.
BTW, I still love it, one Diver down, but the SnP holds its ground well
Wanted to make a NR-R-NR coil (just to see how it feels, plus had lotza spare time) and couldn't, for the love of God, remove the Diver from the SnP. "Tight Fit" is an understatement here! Tried all stunts possible, held the 510 post with pliers (which eventually destroyed its threads), twisted, pulled... the bloody thing wouldn't budge!
All it did is unscrew the coil section (which broke the ceramic cup) any which way that I tried. And putting it back bent the damn thing as well!
So how did I do it?
Finally, held the Tank against the kitchen top, with the 510 post facing the floor, and hammered the top end of the Diver. Yes, hammered it with the rubberized hand-grasps of a pliers and then could push it slightly into the tank. Popped in the Carto-tool over the Diver... continued to hammer it down and voilà!
Bottomline:
This tank, the SnP, is really well built. Holds the Diver with robotic zeal. I know ppl had issues fitting it as well, fortunately I had it easy then - but not while removing it! So folks, be careful. It's wise not to pry it in anyway except to push it down by tapping (aka hammering) it with the Carto-tool mounted atop.
BTW, I still love it, one Diver down, but the SnP holds its ground well
I'm not sure I would file at anything right now. This will be one of the first buttons to fire in the locked position. Honestly, I'm not completely sure that's possible. Even buttons with a tendency to fire when the nut is upside down and protrude the bottom of the device by .05mm will lock when the ring is engaged. I would follow my previous post a pg or so back and flip the nut if it is incorrectly placed.
Take your battery and place it in the refer for a few hours and then recharge. Depending on the age, you should be able to charge it again. Full charge may not hit 4.20 but may be around 4.14. If this works, keep a close eye on the battery.
And remember, Cycle your batteries and test them off the charger often with a multimenter.
GL
- Status
Similar threads
- Locked
