GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

Status
Not open for further replies.

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
Curiso, good post.

I have 0 vacuum issues in my SnP and no issues with the wee o-rings. I am very pleased with it. My diver leak issues also extend to my Scuba and suspect the Atnistique Grail will have the same results until I pull my head out of my .... the diver is tested and true and the 1000's of users that swear buy it arent lucky, they have figured it out.

What I have noticed and thankful that the SnP tank o-rings have broken in a bit after the first insertion(yes, I said "insertion", connected it with "broken in a bit" and even cracked myself up).
 

wongster360

Super Member
ECF Veteran
Verified Member
Mar 11, 2011
879
1,965
Washington
Just received my SS 2.5. Love this setup for my "on the go" vape!

null-2.jpg
 

Lobot

Full Member
Jun 3, 2013
29
28
United States
Idaho, I use the 1/16th XC-116 ceramic wick. I have no normal leaking issues besides the positive pressure when I fill too fast. The last wick I had lasted about 2 weeks till the performance was too little to handle due to gunk.

I do 4 wrap 28 gage that comes out to .7-1.0ohm with silver nr wire. I cut the wick about 1 thread from the top then fluff the ends. Once it is assembled I make sure there is no wick in front of the feed hole. Love the set-up and its what got my wife off analogs 3 weeks ago.

Sent from my SPH-L710 using Tapatalk 2
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Just like to say a huge THANKYOU to perseas today.
Came home from work, checked my order status on the website, not expecting any change to the status (but I've always been an optimist). Low and behold, my order has been shipped already.
Now that's what I call excellent service, I take my hat off to you. Looks like I'll be buying more GP items in the future. Customer service like this deserves praising :thumbs:
 

kiba

Vaping Master
ECF Veteran
Verified Member
Sep 21, 2012
4,283
7,451
40
Alexandria, Va, USA
www.facebook.com
Aye, I post onto 2 British forums daily and sometimes my wording slips into expressions that in the States might seem funny and can be related with a watery, typically yellowish fluid stored in the bladder :D

But wee, means also something very small, little, tiny and its meaning depends on the phrase and the pronunciation, it is rather a vocal kind of expression.

Urban Dictionary: wee

I know, I still found it funny though :laugh:

○ Sent from my GS4 using Tapatalk 4
 

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
Idaho, I use the 1/16th XC-116 ceramic wick. I have no normal leaking issues besides the positive pressure when I fill too fast. The last wick I had lasted about 2 weeks till the performance was too little to handle due to gunk.

I do 4 wrap 28 gage that comes out to .7-1.0ohm with silver nr wire. I cut the wick about 1 thread from the top then fluff the ends. Once it is assembled I make sure there is no wick in front of the feed hole. Love the set-up and its what got my wife off analogs 3 weeks ago.

Sent from my SPH-L710 using Tapatalk 2

Thank you for the input and info!
Been down the lonely road of ceramic but not with a diver. I will continue my quest with eko and silica. I happen to have some time these days. :)
 

Lobot

Full Member
Jun 3, 2013
29
28
United States
Thank you for the input and info!
Been down the lonely road of ceramic but not with a diver. I will continue my quest with eko and silica. I happen to have some time these days. :)

The biggest thing, which I am sure you have been told/read, is placement of the wick and if the ceramic is pressed all the way down.

Keep at it. It will click soon enough. And don't feel bad I still can't get a genny to work :(

Sent from my SPH-L710 using Tapatalk 2
 

Larzis

Ultra Member
ECF Veteran
Verified Member
Jan 26, 2013
1,000
1,690
Cedar Park, TX
I also have issues sometimes with the Diver leaking. Though it is like a real minor drip, unless I leave it sitting for several days, then I notice a little puddle on the napkin I leave them on (been leaving on napkin until I am certain I have the leak resolved). Seem to notice it happens more when the tank gets low.

Not giving up though as I REALLY like them.
 

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
The biggest thing, which I am sure you have been told/read, is placement of the wick and if the ceramic is pressed all the way down.

Keep at it. It will click soon enough. And don't feel bad I still can't get a genny to work :(

Sent from my SPH-L710 using Tapatalk 2

Eh I think this bell curve is very shallow. It will click. If I would sit down and spend an hour or a bit less straight this would be a non issue for me and I am no quitter.
I love the SnP tank and the diver I just need to tweak a bit. The taste and tank performance could not be better, it is outstanding.
Thanks again
 

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
My Paps'...

Whatever iteration they are in - they are sweet.
Each has a character unique to itself,
Each feel right in it's own right.
You need to have it all - to know it all.
Perseas says, "less is more", I disagree...
I can't seem to have enough of all ;)

Q, I have issue with this picture...I would guess most, if not all Canadians would. Especially the hockey haircut crew.

Why the hell is there a cheap plastic container, no name brand of syrup on your table? wtfbuddy?
As you know maple syrup is the pride of Canada yet, you have clearly displayed a lack of nationalism.
I would suggest you packing the wife and kids up, your PAPS and get the f out. It's for your family's safety that you do. Before you are hunted down like an animal. Gods Speed.

:)
 

digitals

Ultra Member
ECF Veteran
Verified Member
Jul 21, 2013
1,449
2,875
Indiana
Q, I have issue with this picture...I would guess most, if not all Canadians would. Especially the hockey haircut crew.

Why the hell is there a cheap plastic container, no name brand of syrup on your table? wtfbuddy?
As you know maple syrup is the pride of Canada yet, you have clearly displayed a lack of nationalism.
I would suggest you packing the wife and kids up, your PAPS and get the f out. It's for your family's safety that you do. Before you are hunted down like an animal. Gods Speed.

:)

This was hilarious at 5:30 when I first read it. I'm all fantasizing over the devices, and Idaho disses the mans syrup!
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Leaking STOPPED
All I did was click some pictures yesterday :)



Diver Update: Kept empty tanked since the last few days in sheer displeasure. Y'day topped it up for pictures, vaped a li'l (b'coz the bloody thing doles out good VTF), took pictures and left it atop the Lux. It remained likewise overnight. T'day morning removed the tank - lo and behold! - not a drop anywhere!

Miracle? I guess so! Or, did it need acclimatization, time to settle down? I'll be watchin' you baby...
_____________________________________________________________________
Last built:
NR-R-NR, 30g Kanthal, 30g Nickel, 2 x 2mm Silica, Strands cut & built exactly as per Atmistique's vid. 1.2Ω.
Top-up technique:
Plugged Cartodriver, removed SnP's bottom cap, pushed the Diver down till it's air-hole was out of the tank. Loosened SnP's top cap to align its fill-holes. Syringed thru one of the fill-holes. Stopped when the juice was just touching the brim of the top-cap (yes, didn't fill it full). Pushed the Diver back inside. Now tightened the top-cap -- and then removed the Cartodriver. Kept it to to settle down for a minute - then vaped. No gurgle, no flooding, no dry-hits. Nice, clean vape!
 

Kataphraktos

Vaping Master
ECF Veteran
Verified Member
May 1, 2013
3,241
10,032
New York, NY
u r gr8 idbro! how could u look thru the foreground (papsalaciaous!) to whatever behind? And i've asked jess to pm u requesting info on better stuff, she was adamant that aunt jemima was quite popular here...


Abomination.

I've informed my Canadian friends, they will be sending an Emissary to... correct you.
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Hey qorax. That's the brushed paps right?

I haven't been this excited for a mod to come in awhile! Something about these Paps thats making me feel this way lol. So simple but elegant

crss is correct. That's the LUX indeed (cleaned up a few days back).
______________________________________
*The SS (all others actually) have 'black' lasered GP logo!
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread