GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

[perseas]

If you have a SS spring replace it with a brass one and make sure everything is clean inside.

 

[qorax]

It's growing..

The vape Cabinet
Just look at the fine line of GP!

Wow! I find it 'glowing' too

 

[fasteddie]

It is the same we have done to GP v2.6 telescopic post plus a thinner PEEK insulator.

Nice one perseas, a solution in hand as usual!
Are you supplying the V2.6 post with new Paps out of interest? or will this just be to order as seperate item?

 

[bertopl]

Hey everyone, I've done a bit of searching, but this is much quicker i think whats the consensus on the button heating up? suggestions have been all over the place, and I'm not sure what the right answer is...basically, on my paps (not X) the button heats up...I'll try recoiling it tonight, but was wondering if I should do something else while I'm at it...thanks,

L

this happened to me and all the cleaning, reassembling, recoiling didnt fix it. (happened with multiple attys) turned out the center post on the button wore down and wasnt making good contact when the button was fully pressed. replaced the button with spares sent by perseas and works beautifully again. good luck!!

 

[Kataphraktos]

"2. Outstanding R&D"

LOL

Oh gee, here we go.

New k103 e cigarette from Chinese manufacturer Kamry | Shenzhen Kamry Technology Co., Ltd|E-Cigarette,Electronic Cigarette

While it's not a 100% knock-off, I feel I have an idea which mod inspired this latest product from the Chinese friends.

Thankfully, it already says it's a "Camry". I relax, lean back and have a nice vape on my "Mercedes Benz" Paps X

Greetings

Ozy

 

[digitals]

Smooth process grabbing the GT today. Everyone remember?

 

[landman2k1]

Taifun GT is live for all those 23mm hunters...

 

[digitals]

I mean WoW!

 

[genghishahn]

Out of curiosity, are there any Spheroid owners who also own a Micro Stick? l have one on preorder and am wondering how the pair works together...

sent from a monstrous screen with an itty bitty keyboard

 

[perseas]

Nice one perseas, a solution in hand as usual!
Are you supplying the V2.6 post with new Paps out of interest? or will this just be to order as seperate item?

We include that with every GP PAPS X, but the simple 18350 GP PAPS v2.5 comes with the GP Telescopic Centre post v2.5. It can be purchased separately.

 

[perseas]

Out of curiosity, are there any Spheroid owners who also own a Micro Stick? l have one on preorder and am wondering how the pair works together...

sent from a monstrous screen with an itty bitty keyboard

It is very stealthy combo

 

[Tito1982]

Perseas, I have a bit of a problem. I got a ss paps 2.5 from the last sale and today I was going to use it but can't. First problem is small, I received 2 thick center pins that adjust the battery contact rather than 1 thick and 1 thin. Second, is the switch kind of just fell apart. The nut that holds the switch came off and when I tried to screw it back on I couldn't. I think the threads may be messed up on either the switch or the nut.

 

[digitals]

Perseas, I have a bit of a problem. I got a ss paps 2.5 from the last sale and today I was going to use it but can't. First problem is small, I received 2 thick center pins that adjust the battery contact rather than 1 thick and 1 thin. Second, is the switch kind of just fell apart. The nut that holds the switch came off and when I tried to screw it back on I couldn't. I think the threads may be messed up on either the switch or the nut.
View attachment 263971View attachment 263973View attachment 263974

Threads on inside post for the switch are reverse. Did you try that?

 

[perseas]

Perseas, I have a bit of a problem. I got a ss paps 2.5 from the last sale and today I was going to use it but can't. First problem is small, I received 2 thick center pins that adjust the battery contact rather than 1 thick and 1 thin. Second, is the switch kind of just fell apart. The nut that holds the switch came off and when I tried to screw it back on I couldn't. I think the threads may be messed up on either the switch or the nut.
View attachment 263971View attachment 263973View attachment 263974

Send an email with your order number to info(at)vapourart.com and we shall send you the missing thin post.

As for the nut, try to screw it counterclockwise, because it has reverse threading for safety reasons.

 

[genghishahn]

Wow! Thanks Perseas! That looks perfect! Now I just need to get my hands on a Spheroid Is that from your personal collection Perseas?

sent from a monstrous screen with an itty bitty keyboard

 

[Tito1982]

Threads on inside post for the switch are reverse. Did you try that?

I'm an idiot, that worked. I was trying to screw it on the regular way (hangs head down in shame). I can use the the the thin battery contact form my paps x so i'm good to go now. Thank you.

 

[perseas]

Wow! Thanks Perseas! That looks perfect! Now I just need to get my hands on a Spheroid Is that from your personal collection Perseas?

sent from a monstrous screen with an itty bitty keyboard

Yes and it deserved the waiting.

 

[perseas]

I'm an idiot, that worked. I was trying to screw it on the regular way (hangs head down in shame). I can use the the the thin battery contact form my paps x so i'm good to go now. Thank you.

You are welcome, you are not the first, it is tricky , but send an email about the missing thin pin, it is a bit thicker from the one in the spares of the GP PAPS X.

 

[Tito1982]

You are welcome, but send an email about the missing thin pin, it is a bit thicker from the one that is in the spares of the GP PAPS X.

Will do Perseas. Thank you.

 

[xtreme101]

Wow! Thanks Perseas! That looks perfect! Now I just need to get my hands on a Spheroid

And I just need to get my hands on a micro stick