GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

[chadsmo]

Spheroid replacement parts kit and drip tip arrived today.

This drip tip is fantastic.

Perseas (or someone else might know), my pin with the two insulators on it now spins a bit when I try to tighten down the coil leg on it. I'm pretty sure I put it together correctly and tightened it down as tight as it would go (with a reasonable amount of force). Any tips on getting that not to spin ? It makes tightening a coil down a tad frustrating.

Edit : ... my image won't load but my photobucket images always work. Odd.

 

[Idaholandho]

This is my gp fluff setup. It also rinses so well when changing flavors.

 

[chadsmo]

This is my gp fluff setup. It also rinses so well when changing flavors.

With the filler is the aim to have no air visible so it's nice and dense or should it still be 'fluffy'. For what it's worth most of my juice is 70-100% VG.

 

[rockstarr]

I received my second spheroid today! Thank you KING P! Just need a bb one now to complete the collection. Oh ye, and that micro stick...and another SnP. Ha

 

[Coldpunk]

My spheroid arrived today also. I'm saving it's build for the weekend.

In other news, I got my diver built leak free. Doubled cotton yarn inside a 30g micro coil at 2.9ohms. I unwound the cotton strands leaving the lowest on on each side pretty long and wrapped them around twice above the threads. I then cut the remaining strands at normal length. Slid it back in the SnP and put that on my provari/hippo. Great flavor and vapor, no dry hits. We'll see how it does over night.

 

[nightfell]

Hello all anyone have an answer on why only the vase DT's fit the spheroid but the classy's do not? The classy bottom o-ring starts to fold over on itself. I have 2 classys and have tried swapping out the o-rings.


Sent from my iPad using Tapatalk HD

 

[chadsmo]

My spheroid arrived today also. I'm saving it's build for the weekend.

In other news, I got my diver built leak free. Doubled cotton yarn inside a 30g micro coil at 2.9ohms. I unwound the cotton strands leaving the lowest on on each side pretty long and wrapped them around twice above the threads. I then cut the remaining strands at normal length. Slid it back in the SnP and put that on my provari/hippo. Great flavor and vapor, no dry hits. We'll see how it does over night.

Get a Sofia and say goodbye to all your problems.

 

[Idaholandho]

Hello all anyone have an answer on why only the vase DT's fit the spheroid but the classy's do not? The classy bottom o-ring starts to fold over on itself. I have 2 classys and have tried swapping out the o-rings.


Sent from my iPad using Tapatalk HD

Perseas will soon have a great solution.

 

[Coldpunk]

Get a Sofia and say goodbye to all your problems.

After buying the diver, SnP, Spheroid, full size Russian, microstick, and another provari(mini with twins and hippo) all in the past month I'm done for a bit. Now it's time to perfect my builds.

I do see a Sofia in my future though. For Christmas perhaps.

It may be time for a family photo this weekend.

 

[Coldpunk]

Double post

 

[rockstarr]

Get a Sofia and say goodbye to all your problems.

Sofia paired with the SnP tank sitting on top of my X in 490 mode is my favorite combo to date. Dependable as is gets IMO.

 

[rockstarr]

5yrs vaping and being on ECF.. Finally, my 300th post... Haha where have you been all this time King P? Back to lurking

 

[2easy]

By saying hybrid look I meant that when a device consists of a mod and an atty connected via a proprietary connection instead of 510, it is a not a real hybrid, like when the atty-mod combination is one part solely (Orion, Zen etc).

The Piccolo Spheroid hybrid project is not set for the near future, we have other more interesting plans for this year

Hello Mr. P,I am new 2 thread.Thank for doing work in such a way that the best device on market can still be had at market price and no flippers can take advantage.If a "T" shirt is in your interesting plans,please imho,it must have your double circle avator.At least the first one.Thank you for showing the rest how buissnes should be done. 2easy

 

[chadsmo]

Sofia paired with the SnP tank sitting on top of my X in 490 mode is my favorite combo to date. Dependable as is gets IMO.

While I only have the Sofia out of that stuff , i do have a spheroid. And judging by the quality of just that little bundle of joy I can see why you guys freak out over your paps mods and tanks. Hell, even the brushed vase GP drip tip I got today is dripping in quality.

 

[the ob]

I believe someone I know might be looking into making some t shirts.

 

[GB023]

You are far past even. Health is priceless


Just received my KFL Plus from inTaste this morning. Had to check out the air control vs standard KFL.

I have learned to keep a post-it pad outside my door and have every page signed with a generic note for Fed Ex, DHL and UPS to leave packages. I feel I am working smarter not harder this way

Looking forward to your take on the KFL+.

 

[genghishahn]

I went with the 1" x 2.75 and cotton wick w/micro coil and was pretty happy with it right out of the gate

Are you using cotton balls or cotton yarn? I only have cotton balls at the moment, but it won't hold itself up to stay in contact with the filler. I'd prefer to stick to microcoils with cotton, but it's not working with what I've got on hand right now

Just got home from work, about to eat my usual midnight dinner. And then! Spheroid tinkering till I get it vaping right.


sent from a monstrous screen with an itty bitty keyboard

 

[perseas]

Spheroid replacement parts kit and drip tip arrived today.

This drip tip is fantastic.

Perseas (or someone else might know), my pin with the two insulators on it now spins a bit when I try to tighten down the coil leg on it. I'm pretty sure I put it together correctly and tightened it down as tight as it would go (with a reasonable amount of force). Any tips on getting that not to spin ? It makes tightening a coil down a tad frustrating.

Edit : ... my image won't load but my photobucket images always work. Odd.

You have to tighten the positive post more. Do it with a flat screwdriver for the post, while you keep the nut still with the help of small pliers. The peek insulators are almost unbreakable, put enough force. On the rare occasion you manage to break them, I will send you a new set, no worries.

 

[perseas]

Hello all anyone have an answer on why only the vase DT's fit the spheroid but the classy's do not? The classy bottom o-ring starts to fold over on itself. I have 2 classys and have tried swapping out the o-rings.


Sent from my iPad using Tapatalk HD

Hello buddy,

I will send to our American reseller this week replacement drip tips for you and anyone else has the same issue in the future. Send him an email please.

 

[qorax]

Do y'all recommend boiling or at least rinsing the fluff stuff for the Spheroid before using?

I don't.
I just cut it to size and roll it in straight from the packet.