GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

Status
Not open for further replies.

millertime660

Vaping Master
ECF Veteran
Verified Member
Oct 24, 2008
3,003
3,456
43
Central Mass
So heres a few questions for you GP pros.

1) Does the spheroid utilize the airflow control ring? Or is that only for attys with airflow in the 510 connector?

2) How much filler comes with the spheroid, should I have picked up more?

3) Is S&C rope necessary? I usually use hemp fiber, does anyone have any experience with a hemp setup?

Thanks in advance.... this is gonna be a long week!
 

Woody7781

Ultra Member
ECF Veteran
Verified Member
Aug 23, 2013
1,546
4,168
Buffalo,NY
Woody7781 is next door to me, so to speak. I'd believe if I get my stuff mailed to his addy and then drive down to him to fetch them ~ that'd be a better idea than waiting for the godot!

Happy to oblige my friend. Lemme know if you ever need to do that. Unless it's for GVC...... Then I'd disappear lol.
 

landman2k1

Super Member
ECF Veteran
Verified Member
Jul 2, 2013
793
2,794
McKinney, Texas
So heres a few questions for you GP pros.

1) Does the spheroid utilize the airflow control ring? Or is that only for attys with airflow in the 510 connector? Yes, because it takes in air from the 510.

2) How much filler comes with the spheroid, should I have picked up more? Not sure, mine came from Domo. But I believe it will be enough to get through a handful of build, plus it's reusable. Just rinse with hot water, allow to dry.

3) Is S&C rope necessary? I usually use hemp fiber, does anyone have any experience with a hemp setup? No, not necessary, but most here prefer cotton as their wicking medium of choice. The SnC tends to stay more rigid over cotton balls.

Thanks in advance.... this is gonna be a long week!

Hope that helps a little. =)
 

Doublek79

Super Member
ECF Veteran
Verified Member
Nov 17, 2013
333
639
Ewood ohio
Mmmmmm … Pearl Necklace.

I have dreamed of that before! haha.
I'm a newb so forgive my idiosyncrasies but I have yet to try gvc or this aforementioned funksauce.

Oh PS I too was an idiot in a rush and ordered my paps x1.5 without getting the dam x ring, I will have to wait till blake gets the polished back in stock. I really wanna try the paps switch out on my surf rider but can't find those in stock anywhere either. Was hoping to pick one up today but no go.
 

chadsmo

Vaping Master
ECF Veteran
Verified Member
Feb 16, 2013
5,267
11,281
BC Canada
I have dreamed of that before! haha.
I'm a newb so forgive my idiosyncrasies but I have yet to try gvc or this aforementioned funksauce.

Oh PS I too was an idiot in a rush and ordered my paps x1.5 without getting the dam x ring, I will have to wait till blake gets the polished back in stock. I really wanna try the paps switch out on my surf rider but can't find those in stock anywhere either. Was hoping to pick one up today but no go.

When he first started out, funksauce was just sold through a Canadian vape forum via a google doc. It was also 10$ for 30ml and I bought a bunch of it. After it went to 15.99 I slowed down on it and havnt bought any in a while. I've been thinking about grabbing a few bottles soon though.
 

perseas

Unregistered Supplier
ECF Veteran
Dec 11, 2011
3,442
17,927
Athens, Hellas
www.vapourart.com
OMFG, lol. During the work day I ended up taking a fast break to order my Paps X 1.5 some fluff and the v3 spheroid replacement kit.
Like an idiot I accidentally put the v2 kit in my cart and checked out :(. I dispatched an e-mail hoping they could clear it up for me.

Grrr, I should have also added the X-ring without AFC. Guess I will hold off for a bit as I refuse to pay separate DHL to get it all here at the same time.

I wonder if Domo will get any in this time around, when can we expect domo's stock in?

Yeah, it was just kind of hard to do while working. I am used to the 8:00am PST vapourdays :(. If anything I hope he will let me cancel the v2 spheroid kit as I already have plenty of replacement parts from back in the day when I was trying to diagnose my old GP Spheroid base shorting problem. If need be I can wait for the spares if it is easy enough to remove that from my order. I plan on being there on the next Vapourday when the Heron and hopefully Paps v3 release.

Yeah I shot one off earlier, but just replied to it with the breakdown. I usually don't mess up this bad lol. I do a lot of import collectibles from Japan and never have to scramble to put more than 1 thing in the cart or dupes of the same thing. They usually close in under a minute so I was super panicked. It did not help that my boss was also IRC'ing me while I was trying to place the order lol.

I vote for 8am PST vapourdays again :D

Your order has been updated buddy and by the time you awaken it will be shipped, so no worries!

Perseas or Miro will straighten you out. Fire off an email to VapourArt.

Thanks bro!

The V3 PAPS will have the Gpin. Perhaps the caps will be available as separate upgrades like the X1.5 cap is.

Yes, they will be available as spares.

LMAO! I ask a lot of questions and played a few contests that require a lot of posting. This thread is taking me awhile to read and understand but I have been eyeing GP products for a month. Just now pulling the trigger.

And I'm working to get verified but the whole PayPal thing isn't working out, yet.

edit-and missed the whole Vapourday thing cuz I had no clue what exactly was going on with it. No biggie, hopefully by the time the next one rolls around, I will have a huge list of things I need to purchase

We are considering to activate the Paypal Express checkout option, once we become sure that there will be no risks for our clients and us. No need to have a Paypal account then, just a credit card.

So heres a few questions for you GP pros.

1) Does the spheroid utilize the airflow control ring? Or is that only for attys with airflow in the 510 connector?

2) How much filler comes with the spheroid, should I have picked up more?

3) Is S&C rope necessary? I usually use hemp fiber, does anyone have any experience with a hemp setup?

Thanks in advance.... this is gonna be a long week!

1) Yes, but the X ring is designed to work with the GP Spheroid v2 as well.

2) It is enough for 2 changes that means months of use, I don't think you need more.

3) People use every kind of wick in Spheroid, it is a matter of personal preference. I haven't used hemp yet, but in UKVapers forum they did. I don't find the link for that sorry.

Is it strange that im dreaming of different x-tension finishes before I even get my paps? Has this ever been talked about?

We experimented with that and we concluded that the visual continuity is perfect as it is now.

I have dreamed of that before! haha.
I'm a newb so forgive my idiosyncrasies but I have yet to try gvc or this aforementioned funksauce.

Oh PS I too was an idiot in a rush and ordered my paps x1.5 without getting the dam x ring, I will have to wait till blake gets the polished back in stock. I really wanna try the paps switch out on my surf rider but can't find those in stock anywhere either. Was hoping to pick one up today but no go.

Once the GP PAPS v3 is ready, we shall have v3 switches available.
 

rodsky77

Super Member
ECF Veteran
Verified Member
Oct 25, 2013
973
1,863
Switzerland
2) It is enough for 2 changes that means months of use, I don't think you need more.

Hi Perseas,

Thank you for shipping out my order (already listed as shipped) :)

Are there any plans for producing more drip tips any time soon? I was not able to get a brushed classy or a vase as they were not in stock, but was lucky enough to get a polished one as now there are none in stock at all :)

How long does the fluff really last - I mean it's synthetic, so one should be able to to reuse it almost forever, I suppose.
But then everything wears out after months of use and constant washing.

Waiting on the mailman :D

Thanks again :)
 
Status
Not open for further replies.

Users who are viewing this thread