Griff's Leather Mod Holsters

[Griffin]

Thanks very much folks, I'm very glad to hear that you're happy with the sleeves!

I've gotten so used to mine that I can't even use my Provari without it now, it just feels so...naked.

I should have some more sleeves, for other mods, up on the site within the next week or so and I am still working on those fancier color/design options.

 

[hairball]

Love the mod Tim. Any chance of you building me one for 6V? j/k. Love the new holsters. Will you make them for the GLV2 5V? Also need some for the Bolts...Indulgence V3...ummm....P-18. You need to stop this or I'm gonna be broke...LOL.

 

[Griffin]

Love the mod Tim. Any chance of you building me one for 6V? j/k. Love the new holsters. Will you make them for the GLV2 5V? Also need some for the Bolts...Indulgence V3...ummm....P-18. You need to stop this or I'm gonna be broke...LOL.

For technical reasons, I can only make a 6v LeatherMod from porcupine hides so it's a little tricky to hold...

A sleeve for the GLV2 might be doable but the Bolt won't work because the button sticks out way too far to get it into the sleeve unless I leave a big slot - and I think that would be really annoying.

The others I can't really say since I don't currently own them and the fit on the sleeves has to be so close that I wouldn't even try to make one for a mod I don't own.

 

[jtieri]

Hey Griffin...

Do you think the sleeve I ordered (in shipping) for the Saber Touch would fit the ProVari V2? The reason I am asking is that I had to cancel my order for the Saber Touch. Waiting almost a month for ANY mod is ridiculous. I ordered the new satin black ProVari V2 and was curious to see if it would fit. If not, could it be returned? Thanks!

 

[Griffin]

Hey Griffin...

Do you think the sleeve I ordered (in shipping) for the Saber Touch would fit the ProVari V2? The reason I am asking is that I had to cancel my order for the Saber Touch. Waiting almost a month for ANY mod is ridiculous. I ordered the new satin black ProVari V2 and was curious to see if it would fit. If not, could it be returned? Thanks!

​

The custom Saber Touch lanyard that you ordered definitely won't fit the Provari and is unlikely to fit anything other than the standard-size Saber Touch that it was made for.

When you receive the package, I believe that you can take it to the post office, unopened, and ask them to return it to the sender so that you won't have to pay for return postage.

Once I get it back, I will issue you a refund, less the shipping.

 

[jtieri]

Okay thanks!! The provari should be here in a week or so. I just placed a new order for the Provari mod sleeve. Thanks Tim, I appreciate your professionalism and look forward to the new sleeve. Thanks again!!!

As far as the one for the saber that I ordered. I know it's custom. Would you rather I try to sell it to someone or would you still offer me a refund? Just let me know. Thanks!!

 

[Griffin]

Just a few updates and additions to SerenityGear.com to let you know about:

-The Bombshell has been added to flip-top, open-top, flexi-holster, and lanyards. Sleeves will be available soon-ish.

-Silver Bullet sleeves will also be available soon-ish. GLV and other sleeves will come later-ish.

-The Lavatube has been added to the flip-top holster options. Other holster styles will not be available for the Lavatube because the nubs on the bottom cap make it just about impossible to get a proper fit, plus the stupid cap cover pops off if you breathe on it.

-The Saber Touch has been added as a lanyard option. It's a little different than the other lanyards and requires you to take the bottom cap off the mod to slip the lanyard onto the body.

-Flexi-holsters will now ship with a flat, black nylon lanyard with a "J" clip which you can use with the D-ring to wear your holster as a lanyard. (This is sort of a trial and may work better for some mods than others.)

-All of my holsters are now made from genuine dinosaur hides and sewn with 24k gold thread, by giant robots. Kidding! Just wanted to see if you were paying attention!

-I've noted on the site that ProVari sleeves may not be a good idea for devices with a satin finish since it seems that the textured finish makes it very difficult to get the mod into and out of the form-fitting sleeve.

-I can make a flip-top holster that will fit a mod wearing one of my sleeves; it's not an option on the site but you can include a note in the comments section, when ordering a flip-top holster, if that's what you'd like.

 

[pwyll]

Just a few updates and additions to SerenityGear.com to let you know about:
-The Bombshell has been added to flip-top, open-top, flexi-holster, and lanyards. Sleeves will be available soon-ish.
-Silver Bullet sleeves will also be available soon-ish. GLV and other sleeves will come later-ish.
-The Lavatube has been added to the flip-top holster options. Other holster styles will not be available for the Lavatube because the nubs on the bottom cap make it just about impossible to get a proper fit, plus the stupid cap cover pops off if you breathe on it.
-The Saber Touch has been added as a lanyard option. It's a little different than the other lanyards and requires you to take the bottom cap off the mod to slip the lanyard onto the body.
-Flexi-holsters will now ship with a flat, black nylon lanyard with a "J" clip which you can use with the D-ring to wear your holster as a lanyard. (This is sort of a trial and may work better for some mods than others.)

-All of my holsters are now made from genuine dinosaur hides and sewn with 24k gold thread, by giant robots. Kidding! Just wanted to see if you were paying attention!

-I've noted on the site that ProVari sleeves may not be a good idea for devices with a satin finish since it seems that the textured finish makes it very difficult to get the mod into and out of the form-fitting sleeve.
-I can make a flip-top holster that will fit a mod wearing one of my sleeves; it's not an option on the site but you can include a note in the comments section, when ordering a flip-top holster, if that's what you'd like.

Whew. I was worried at first. We got enough stuff made by giant robots coming in from China. Besides, giant robots have a tendency to mar delicate materials like dinosaur hide and gold thread.

You were serious about the dinosaur hide and gold thread, right?

 

[kazz63758]

Tim,

The holster I ordered arrived this week and I am VERY pleased with my purchase! Pleased enough that I wrote my very first review on this site about it. Thank you!

 

[Griffin]

Thanks Kazz, I'm very glad to hear that you like the holster! And thanks for the review, that's awesome!

 

[kazz63758]

You're welcome--but the praise for the holster is deserved. It is well crafted and I like it a lot more than I thought I would when I ordered it. The review doesn't have the flowing prose that many contain, but I think I got the point across

 

[dekalbave]

Wow, I read almost all the way through the thread and you've come a long way, Tim. Just placed an order for a Provari extended cap holster. Really looking forward to it, because the Provari is just too darn expensive to fall on the pavement!
Thanks for getting into this whole thing in the first place, and continuing on!

 

[Griffin]

Thanks a bunch guys!

 

[dekalbave]

You're welcome--but the praise for the holster is deserved. It is well crafted and I like it a lot more than I thought I would when I ordered it. The review doesn't have the flowing prose that many contain, but I think I got the point across

LOL...I just noticed your sig!

 

[kazz63758]

LOL...I just noticed your sig!

Glad you like it! I find it amusing (lol, you are only the second person to comment on it since I've been on ECF)

 

[dekalbave]

Glad you like it! I find it amusing (lol, you are only the second person to comment on it since I've been on ECF)

Well, I guess there aren't a lot of brain scientists here, then.

 

[spidermonkey]

Hey, Griffin. Just orderd my third open top holster from ya!! Dark green with a leaf this time. When my "Don" shows up I'll send you the sizes you need for that one too. I also have a Standard Zenesis on the way but I don't think the bottom button locks... too bad cuz I realy enjoy the convience, quality and safty your holsters provide. Keep up the good work because more orders are coming soon...

 

[Bamrz]

Hey, Griffin. Just orderd my third open top holster from ya!! Dark green with a leaf this time. When my "Don" shows up I'll send you the sizes you need for that one too. I also have a Standard Zenesis on the way but I don't think the bottom button locks... too bad cuz I realy enjoy the convience, quality and safty your holsters provide. Keep up the good work because more orders are coming soon...

I can give you size on the standard - 7/8" diameter and 6" tall (bottom to top of device), 3 3/4" from bottom of device to bottom of tank, 5" from bottom of device to top of tank.

 

[spidermonkey]

I think that was all he needed. Thanks bamrz One last Q needing an A. My holster for the SB is a little snug. Any tips on how to loosen it up a bit.

 

[Griffin]

Thanks again Spidermonkey! That's a very nice choice of colors, I just hope you aren't counting on it for St. Patrick's day - I'm getting a little behind on orders so it probably won't ship out until next week. (If you were counting on having it by then, let me know and I'll do what I can.)

Thanks for the measurements Bamrz! I'll add those to my database.