House of Hybrids featuring the Zenesis PV

[UnFettered_Soul]

List what juice you are using, mesh count, how many wraps, and how bad the wicking is. Does it dry hit after 4-5 quick pulls, or on 1 long draw?

Juicy Vapor Ecto Plasma, reduced PG forumla. I don't know the exact PG/VG, but it's not "sludge".

I'm using the wick/mesh/wire that came pre-installed. I have not made any attempts yet wrapping new ones.

With or without the tape/poked hole, the first long draw gets me a tiny amount of vapor and a whack in the throat.
If I hold the button, short puff I don't inhale, medium draw and inhale it's fine. Could be better/could have more vapor and taste, but it's ok. I can usually get 2 maybe 3 hits and then dry/harsh/icky.
I do get some condensation, but I only get juice in the cap if I tip upside down a lot.

If I leave the cap off, the vapor is amazing

 

[Paradisevap]

have you made sure there burning evenly ?



I had one coil that was fine for 15 - 20 mins then would dry out. I started pulling the cap and checking the coil and wick, it ended up being just alil to tight and would start constricting the wick when well saturated ..... let it sit 5 - 10 mins it would loosen up

 

[jgrubb]

Hello all. First visit here and am very interested to purchase one of these. Read the whole thread and like what I see alot, and then was sold on zens comment about recent changes with ecf. Very classy man. My question is on the deccription it says can be used Genesis or silica. Is that just a difference in materials used and is there anything I will need to do once received to use the 400 mesh and kanthal?

 

[Paradisevap]

Welcome jg the Zenesis comes with pre oxidized and pre rolled mesh and with the kanthal

 

[Shaitaan]

It is, quite frankly, THE BOMB
Most any tube mod can now operate like a Darwin.

not quite no display, no adjustment on the fly....NO WARNING of low battery charge.......BIG difference

 

[jgrubb]

Thanks. Good to be here. So i will have one ready to go and then when i want to do my own I need to purchase .20 kanthal and 400 mesh correct? Everything else seems brilliantly simple with some trial and error.

 

[jgrubb]

I have not seen anywhere how the liquid is inserted into the tank. Is it a syringe through the little hole on the top?

 

[Shaitaan]

Juicy Vapor Ecto Plasma, reduced PG forumla. I don't know the exact PG/VG, but it's not "sludge".

I'm using the wick/mesh/wire that came pre-installed. I have not made any attempts yet wrapping new ones.

With or without the tape/poked hole, the first long draw gets me a tiny amount of vapor and a whack in the throat.
If I hold the button, short puff I don't inhale, medium draw and inhale it's fine. Could be better/could have more vapor and taste, but it's ok. I can usually get 2 maybe 3 hits and then dry/harsh/icky.
I do get some condensation, but I only get juice in the cap if I tip upside down a lot.

If I leave the cap off, the vapor is amazing

i just recieved a sample the other day, still with my 325 wick and 4 wrapped coil, from the malty toffee and boba's bounty i've been vaping....i cleaned and water/dry fired the unit last night, then filled it with the ecto plasma 18mg...it's 70/30 pg/vg..... and it wicks NO problems with the 325 broken in (approx 4 days useage so far)....no metallic taste, not a bad juice reminds me a bit like hawaiian punch

 

[Shaitaan]

I have not seen anywhere how the liquid is inserted into the tank. Is it a syringe through the little hole on the top?

yep..there's a filler hole in top, and a syringe is included with a new zenesis

 

[Paradisevap]

yes and comes with spares and soon you'll be able to get all the supplies from the web site - Home


correct theres a fill hole

 

[jgrubb]

Perfect. I think i will get some 325 too in case bobas is to thick for 400. Production to us not on a list is going to be available at beginning of April? Did i understand that correctly or are there any delays I missed?

 

[jgrubb]

Just saw that about supplies too, even better

 

[Shaitaan]

Perfect. I think i will get some 325 too in case bobas is to thick for 400. Production to us not on a list is going to be available at beginning of April? Did i understand that correctly or are there any delays I missed?[/QUOTE

the zenesis will come with kanthal and both size wicks, enough total to last you a year....

 

[vicsan]

Thanks. Good to be here. So i will have one ready to go and then when i want to do my own I need to purchase .20 kanthal and 400 mesh correct? Everything else seems brilliantly simple with some trial and error.

Zen includes, with the Zenesis, (6) 400 mesh wicks and (6) 325 mesh wicks and enough Kanthal 32 wire to last approximately 1 year. He also includes a syringe for filling the tanks. There is a small fill hole underneath the top cap where you inject the juice.

He will have pre-rolled 400 and 325 mesh wicks for sale on his web site. 12 for $8.00...a one year supply. Kanthal 32 will be 50 feet for $5.00. Or you can buy your own and roll your own wicks.

Zencessories

 

[jonny2hottie]

anyone looking into Lorderos's mod to the zenesis. i can tell you first hand that it works great. i modded my standard within the first 24 hours of owning it. Thanks Lorderos. i can tell you this though...i dont think its too hard with the right tools but i can see where some may mess up the finish.

thanks for honoring this mod ZEN~


2 of the 8 pre-rolled wicks fit the standard. the others were not rolled tight enough by just a smudge. if the wick is too hard for me to push in then i dont force it. its OK. i live close to McMaster-Carr and i just drive down and will call mesh from them.

 

[Paradisevap]

Perfect. I think i will get some 325 too in case bobas is to thick for 400. Production to us not on a list is going to be available at beginning of April? Did i understand that correctly or are there any delays I missed?[/QUOTE

the zenesis will come with kanthal and both size wicks, enough total to last you a year....

Yep Zen takes Great care of the Zenfedels


** Caution use of A Zenesis may cause your other PV's to become lonely and jealous

 

[jgrubb]

Lol. I didn't think it would be that simple but that is freakin awesome. I can't believe I missed all that. Too busy learning about wicks and coils. When can I have one? Most excited I've been about a mod and I've been doing this for quiet a while now

 

[vicsan]

Lol. I didn't think it would be that simple but that is freakin awesome. I can't believe I missed all that. Too busy learning about wicks and coils. When can I have one? Most excited I've been about a mod and I've been doing this for quiet a while now

I think there will be Zenesii in stock mid-to late April.

 

[vicsan]

Lol. I didn't think it would be that simple but that is freakin awesome. I can't believe I missed all that. Too busy learning about wicks and coils. When can I have one? Most excited I've been about a mod and I've been doing this for quiet a while now

Also keep an eye on the zen~ Alerts thread in the Zenesis Group Forum:

http://www.e-cigarette-forum.com/forum/groups/zenation-home-zenfidels.html

That's where he will make all announcements concerning the Zenesis. You can easily find updates on that thread.

 

[st0nedpenguin]

not quite no display, no adjustment on the fly....NO WARNING of low battery charge.......BIG difference

The Kick stutters to indicate low battery voltage.