i need to put this pv down.... no willpower... can't do it!!! lol i have a headache now
- Status
This is such an exciting thread to this day. Time flys fast in here. It seems like only yesterday when Zen made this thread and already we're blessed with Zenesis's in hand, FAQ on board, and tips like shaving DT's, sanding batteries, etc are so much more I am a lucky gal to have gotten in on this first run! Kudos to everyone and especially to the Zen Master.
Ps. The pics you've posted are outstanding! I can't believe how difficult it is to achieve true definition of this beautiful pv. I've tried all day to capture a pic but i can't get good enough lighting and the sides always darken which then makes the zenesis appear non-streamlined. Again, a big Kudos to all the photographers.
Ps. The pics you've posted are outstanding! I can't believe how difficult it is to achieve true definition of this beautiful pv. I've tried all day to capture a pic but i can't get good enough lighting and the sides always darken which then makes the zenesis appear non-streamlined. Again, a big Kudos to all the photographers.
Leave this thread for a day and there's so many pages to read through lol. SS Drip tips can be made to fit, if you have access to a lathe (I do at work) that has been setup with the right tooling for SS or alternatively your best bet is a belt sander with a fine grit belt, a bench grinder with a fine stone wheel can be used but be very careful as it's extremely easy to take to much off. If you visit an engineering shop and take the cap and tip with you they can make the tip a precise fit and if you say there's no rush and to do it during down time it shouldn't cost more than a six pack of beer 
Btw does anyone know whether the Ti edition has any spots left, I finally have the spare cash (well maybe not so spare lol) to lay down for one I pm'd Zen but I know he's awfully busy right now getting the last febbers out so he can start to churn em out for us marchies
I pm'd Zen but I know he's awfully busy right now getting the last febbers out so he can start to churn em out for us marchies 
I have been using a Super-T SS drip tip I got over a year ago. It fits fine.
Welcome! We could use a psychiatrist here!
Don't politicians just kill you? They will support big tobacco and big pharma before they even consider PVs as an excellent alternative to cigarettes and I think we all know why that is!
Welcome to the Zenfidel Group. Do you do group therapy?
I run a few groups but most of my work is chronically ill mental patients 80% of who smoke. There is good evidence that schizophrenia affects many brain centers and some evidence that pure nicotine may actually be an antidepressant. PG is bactericidal and virocidal. Nicotine decreases the chance of Parkinson's disease significantly.
Wouldn't it be funny if vaping were GOOD for you ;-)
Jeff
GG stealth, Provari, iatty2, DIY chef
All my trippy's fit great, no worries .
Awesome news, thanks
This is my first one and I'm really impressed, can't wait to start collecting them 
I tried a few of my Trippy's on, they fit fine but seemed too tall for me. Now I have a SS calabash tip on there and I don't have to worry about it breaking.
With the weight of the Zenesis, I think a Trippy would snap off near the o-rings if it hit anything on the way over. 
I tried a few of my Trippy's on, they fit fine but seemed too tall for me. Now I have a SS calabash tip on there and I don't have to worry about it breaking.
I assume it would also but I'm very careful with all my mods bar my work one which takes a beating in a boilermakers lol. I also have a couple of ming SS ones and one of the Airflow control tips coming to try out as well.
Is anyone on right this minute that wouldn't mind swapping a PM with me real quick?
I've sent a handful of PM's in the last few days and haven't had a single reply.....
which is odd. I'm just wanting to test and see if there's a problem.
Just a quick "hi, I got your PM here's one back".
I've sent a handful of PM's in the last few days and haven't had a single reply.....
which is odd. I'm just wanting to test and see if there's a problem.
Just a quick "hi, I got your PM here's one back".
If you want it to keep up with heavy vaping, you'll need to make a thinner walled wick and make the wick longer so it just fits into the top cap almost hitting the top of the cap. Make the wick from about 20mm wide by however tall you can fit. The thin wall will wick very fast and the height will allow the un-heated part of the wick above the coil to act as a gravity fed juice reserve for the coil. I do this on all of my Genisis mods and it works wonders.
Dry hits are almost completely a thing of the past and no tilting to keep it wet.
I was stopped at the scanner and asked what myGGTS/ Ody and HH357's were, but the guy seemed more interested than concerned. It seriously could have been ANYTHING and he would have took it for what I said. He was polite but it shows what a waste of time security really is.
Thanks guys, on the PM's.
Received and sent fairly quickly. Thought maybe my inbox was full with the new limits.
Either that or I'm on a secret serious "ignore" list. LOL
Received and sent fairly quickly. Thought maybe my inbox was full with the new limits.
Either that or I'm on a secret serious "ignore" list. LOL
It should be fine. to be 100% safe, I would take the liquid out so that you cannot get in trouble for that.
It works great. It occasionally gets a build-up of condensation that needs to be blown out, but it works like it's suppose to. It controls the air flow.
- Status
Similar threads
- Locked
