House of Hybrids featuring the Zenesis PV

Status
Not open for further replies.

vicsan

Sparky
ECF Veteran
Verified Member
Apr 15, 2011
3,976
4,831
IL
Great news about the button Zen~! Mine works fine as is(tho less slop is a good thing)
I have only vaped about 1ml in my Standard so far and it already tastes purty dang good,if a bit airy compared to what I'm used to.
So far,my only nits to pick are the button(a bit sloppy)And Zen~ is already on top of that,and a airy draw.I think I can tighten that up with the right DT.



Just makes waiting for the zentanium standard even better

Try kcos's Mawn DT! Because of the design with the narrow neck, if makes the airy draw not quite as airy. It works WELL. It looks nice too. :)
 

sinnyc

Super Member
ECF Veteran
Verified Member
Dec 10, 2011
944
794
Up north
I have not received a shipping notice yet ... Hopefully it will come today... Seeing all the Zenfidels that were on the same list as me with their apv's is really wearing on my patience..... I know zen is doing all he can,, but it is so trying...

Slumdog, Zen~ posted this about an hour before your post.

Every effort is being made to get all remaining orders out by Monday for USA shipping and Tuesday for International orders.

- Tim
 

Paradisevap

Ultra Member
ECF Veteran
Verified Member
Oct 30, 2011
1,327
1,213
Central Fl
Good morning Zenfidels!

Been a couple of weeks since I have had the chance to get on! Where I am at in Florida, Verizon doesn't work worth a crap! :mad: The campground I'm staying in is basically wanting me to pay their Internet bill for the month instead of including it in lot rent, so I'm at the mercy of Verizon.

I love seeing all of the excitement and anticipation anxiety from everyone awaiting the arrival of the their Zenesis'. Everyone that already has one knows this, but after figure out what set up is your sweet spot...it's like unlocking the door to a whole new level of vaping heaven.....vaping VIP!

I can't wait to be the proud owner of a Zentanium! :D


what part of Florida you in ?
 

cd68

Senior Member
ECF Veteran
Verified Member
Jan 31, 2011
204
159
SE Indiana
IMG_0363.jpg


Standard #0022 has arrived safely

thanks Zen~ this is great
 

slumdog

Super Member
ECF Veteran
Verified Member
Dec 15, 2010
884
309
South Florida & NYC The Village
I have not received a shipping notice yet ... Hopefully it will come today... Seeing all the Zenfidels that were on the same list as me with their apv's is really wearing on my patience..... I know zen is doing all he can,, but it is so trying...
Ok, I will take the -1 for replying to to my own post, but soon you will understand, if you haven't already figured it out for yourself

Mike, after reading this on Tim's repost, With all sincerity, I did not mean for this to come off the way it does, Please do not take this to heart, this rant is directed at circumstance, and circumstance alone. As crazy as the whole thing is making me, You must be spastic.. And I wish I could take it back, because no matter what I say, I know it will in some way affect you, because I know how deeply you care for your work..but please understand, I do not blame anyone, or feel adverse about it at all.. Just blowing off some,
 

Hrathor

Super Member
ECF Veteran
Verified Member
Oct 27, 2011
851
1,175
55
Canton, MI
Just an FYI - two days in and my O-rings have not "swelled up" enough to make any difference. Tank still slides around pretty easily and the cap is the same.
Mine tightened up enough that it's hard to pull off. I can pick the standard and the mini up by the top cap and shake it quite hard and it doesn't even pull away enough to make a gap. If you haven't already, lube the o ring really good with some juice and put the cap back on. Mine did start off pretty loose, but now I need to pull on it pretty good to get it off.
 

Hrathor

Super Member
ECF Veteran
Verified Member
Oct 27, 2011
851
1,175
55
Canton, MI
Zenfidels Unite! I'm having issues with my standard. I did everything right but I'm getting a burnt metal taste. Even when I directly drip juice onto the wick and coil it still tastes strongly of burnt metal.
I'm using 30/70 pg/vg
Plain Menthol/No coloring
Did you burn it in a few times? When you drip directly on the wick and fire it with the cap off, do the coils start glowing right away or does it just burn the juice for a few seconds? How close is the wick to the center pole? My mini broke in fast but the standard had to have the coil re-wrapped. It sounds like you might just need to burn it in a few times, but if you can give some more info it might help.
 

ecitek

Super Member
ECF Veteran
Feb 16, 2010
318
163
Earth
Mine tightened up enough that it's hard to pull off. I can pick the standard and the mini up by the top cap and shake it quite hard and it doesn't even pull away enough to make a gap. If you haven't already, lube the o ring really good with some juice and put the cap back on. Mine did start off pretty loose, but now I need to pull on it pretty good to get it off.

Let's just say that the o-rings are self-lubing on mine (and that is not a plus). And no they are not swelling.

To be honest, I am a ....... I can't even get a hit right now because of the damn switch. I may have to get my old homemade bottom feeder out just so I can vape. I got one for my neighbor too and he is having similar problems with his switch, but it is a known issue at this point.

AAAAARRRRGHH!:mad:
 
Status
Not open for further replies.

Users who are viewing this thread