too late bro, you already sold it, you're friends with me, remember?
my soul was bought and paid for long before you arrived, bud. being friends with you just solidified my damnation!!! LOL
Last edited:
- Status
my soul was bought and paid for long before you arrived, bud. being friends with you just solidified my damnation!!! LOL
Yes... drill a hole with a 44 magnum... that should solve the flooding issues
We will get you going... I would love to see a pic of that mesh you have unrolled... and also a link to where you got it...
FWIW... I think you're probably close to getting it rolling down the right path.
Yes... I highly recommend the Henry Big Boy lever action with the brass receiver... it will compliment your PV quite nicely!
zen i think he said it was mesh from you and to me the bottom looks right but at the top it looks frayed which i would think itll make it wick more, he also posted in the help thread in the group
vaptamist .................. another one or will 1 do ??
vaptamist .................. another one or will 1 do ??
Originally Posted by Diagasa
Could my wicking issue also be that I have the wrong wick installed? I hate to go to all the trouble of changing it only to find it makes matters worse. I did try removing a 1/4 inch section from my wick already and that did not help at all. Any input here would be great. Thanks guys.
I also tend to back to back my devices quite often. I could think that the Zenesis would be able to handle more than one small hit before I need to let it juice back up.
@Diagasa. I agree with lorderos. First try exactly as he said with the 400. If after a day of breaking it in, it doesn't start to wick better, then try the 325. You can also increase the "chimney" above the top cool a little. Also, if is not wicking, a very SLIGHT pull with the air hole covered with your thumb will pull a little bit of liquid into the wick. SLIGHT pull. Or you can hold it upside down or sideways between vapes. I used 100% BMV VG in mine for the last two days using a taller "chimney", fairly tight rolled #400, and it was loosey in the wick hole to the tank.
Zen~, Diagasa is having wicking problems with high VG. ecitek is the one with flooding... Regarding that, if I have been chain vaping and pull my top cap off, flip it over, then it looks the same as his and it vapes just fine... If I have been chain vaping and set upright for a bit, it appears to just settle into the tank. I run 80/20 a lot... Mine would dump 1/4 tank into the cap if laid on its side. That was resolved by a wick that was tighter in the hole and pinched at the top, EXACTLY like Zen~ shows in his video. I was using a hollow straw wick because that is what works for me in the LineV1 and my home built atties.
Could my wicking issue also be that I have the wrong wick installed? I hate to go to all the trouble of changing it only to find it makes matters worse. I did try removing a 1/4 inch section from my wick already and that did not help at all. Any input here would be great. Thanks guys.
I also tend to back to back my devices quite often. I could think that the Zenesis would be able to handle more than one small hit before I need to let it juice back up.
@Diagasa. I agree with lorderos. First try exactly as he said with the 400. If after a day of breaking it in, it doesn't start to wick better, then try the 325. You can also increase the "chimney" above the top cool a little. Also, if is not wicking, a very SLIGHT pull with the air hole covered with your thumb will pull a little bit of liquid into the wick. SLIGHT pull. Or you can hold it upside down or sideways between vapes. I used 100% BMV VG in mine for the last two days using a taller "chimney", fairly tight rolled #400, and it was loosey in the wick hole to the tank.
Zen~, Diagasa is having wicking problems with high VG. ecitek is the one with flooding... Regarding that, if I have been chain vaping and pull my top cap off, flip it over, then it looks the same as his and it vapes just fine... If I have been chain vaping and set upright for a bit, it appears to just settle into the tank. I run 80/20 a lot... Mine would dump 1/4 tank into the cap if laid on its side. That was resolved by a wick that was tighter in the hole and pinched at the top, EXACTLY like Zen~ shows in his video. I was using a hollow straw wick because that is what works for me in the LineV1 and my home built atties.
Nope, the pic he posted of the wick he rolled was with his mesh. It looks more like 40x40 than 400x400 and was mostly un-oxidized. He later replaced it with one of Zen~'s wicks.
- Tim
Zen recommends .44cal? Darn - and I already had my .357 out earlier when I was "pruning" folks from the thread.
FWIW the Ebay seller I bought the "304 stainless 325 mesh" off of no longer sells it. However I did take my magnifier and counted around 12 threads per 1mm. I think it is the flash on my camera that makes it look like a screen door. Honestly it worked well for producing vapor, but I changed to one of your in the spirit of trying-every-damn-I-thing-I-can-to-get-this-working.
I am now going to move over to the Group thread (as requested) to post the "firing" pics I just took.
FWIW the Ebay seller I bought the "304 stainless 325 mesh" off of no longer sells it. However I did take my magnifier and counted around 12 threads per 1mm. I think it is the flash on my camera that makes it look like a screen door. Honestly it worked well for producing vapor, but I changed to one of your in the spirit of trying-every-damn-I-thing-I-can-to-get-this-working.
I am now going to move over to the Group thread (as requested) to post the "firing" pics I just took.
@Karma. I usually won't do this, but... Dude please don't take any of this personal. Don't be dramatic either, and just have a little thicker skin. You have to realize if someone puts down some $$$ and they can't get it to work to their expectations, well people can get upset easily. So take the high road and if someone doesn't want to read your posts, all they have to do is put you on their ignore list. It really is no big deal. I have many people on my ignore list, because I can't stand people in general. I just don't tell them, well usually. I am a techy person, not a people person You contribute here like everyone else, and the readers take it or leave it. Only contributing to VW is not the answer... I have read some of your ramblings, and some are pretty good... and some I am still trying to figure out what is going on in there...
You contribute here like everyone else, and the readers take it or leave it. Only contributing to VW is not the answer... I have read some of your ramblings, and some are pretty good... and some I am still trying to figure out what is going on in there...
Just got Vapemail !!!!
my aw 2000mah's BUT did get my Tracking # from Zen !!!!!! Weee Haaa
my aw 2000mah's BUT did get my Tracking # from Zen !!!!!! Weee Haaa
Oh yes... By the way... all but 5 Domestics shipped today, and the last 5 didn't go because the post office closed at 5, I showed up at 4:45 and they said at 5:15 we're kicking you out...
Edit: Plus I'm still waiting on the address for Johnny2Hottie and oGosh... if you read this... PLEASE PM me!
So a handful didn't make it... I'm still sorting through tracking numbers trying figure out who they all go to.
Shipping SUCKS!
Edit: Plus I'm still waiting on the address for Johnny2Hottie and oGosh... if you read this... PLEASE PM me!
So a handful didn't make it... I'm still sorting through tracking numbers trying figure out who they all go to.
Shipping SUCKS!
yep, you may need it as a deterrent to keep zenesis thieves away...
PM'd ya
the wait is killing me. i definitely gonna vape myself into a coma once i finally get it in. LOL
the wait is killing me. i definitely gonna vape myself into a coma once i finally get it in. LOL
Karma. Say it aint so. If you are leaving im outa here to. I dont know about the wall. Will shoot you a pm.
Karma!!!! Please stay here. You, along with the other posters, make this thread a great place to live. Time has flown fast because of u all plus I've learnt so much.
Cool cats land on their feet and you're a pretty cool cat. PAWS OUT!!
Congrats to the new group of mail stalkers . HooRah!!!!!
(Plus groups is too hard to find on tapatalk.
Cool cats land on their feet and you're a pretty cool cat. PAWS OUT!!
Congrats to the new group of mail stalkers . HooRah!!!!!
(Plus groups is too hard to find on tapatalk.
Last edited:
don't let one bad apple upset you karma.... he paid all that money and is unhappy so is upset which is understandable. unwillingness to accept that it is his errors and that we are trying to help him is not....
- Status
Similar threads
- Locked
