How Big is your Ecig??

[kristin]

Does anyone have a mod or pen style longer than 7 inches long X 1.1 inches wide?

I'm trying to determine the largest ecigs sizes when assembled - length and width at the widest part.

What brand ecig/mod do you have and what are it's dimensions??
Protege, Prodigy, Silver Bullet, Xhaler, Juicebox, Chuck, Little Chuck, eGo, etc. I need the length and width of those or any others that exist that I forgot to mention!

Also:
How long are titan mega batteries?
And what is the longest atty/cart combo? The 801? How long is it?
What is the size of the biggest mod batteries when not in the device?

Any help would be greatly appreciated!!

 

[kristin]

22 views yet no one will tell me any info? Size doesn't matter, so you can tell me, you know! lol!

 

[Ladycats]

The 801 atty is 1 7/8th" close enough to 2" , when coupled with the Prodigy V2 .. that's a total of 6" .... w/o a tip .. sorry, I "tailpipe" and can't find any tips laying around ... so maybe add another inch .. give or take ...

 

[kristin]

Thank you!!

So the Prodigy V2, with an 801 atty is 6", not including the mouthpiece, correct? Then altogether may be closer to 7" long with the mouthpiece?

Do most people use an 801 setup with the Prodigy do you think?

Also, is the V1 longer or shorter than the V2? And how wide/thick is it?

 

[Bella Chic]

I have the eGo with the Stainless Steal tip and it measures just under 4 3/4" so I guess it's not that long, but I figured I'd chime in and help.

 

[kristin]

I have the eGo with the Stainless Steal tip and it measures just under 4 3/4" so I guess it's not that long, but I figured I'd chime in and help.

Thanks!

And it's about 1" wide at the thickest point, correct?

 

[Bella Chic]

Just under 2" I suck at reading the marks but if you go by marks it's 1.13"

 

[5cardstud]

The one I'm currently making is big. It's about 5 to 6 in. high by 2.5 to 3 in. wide by about an 1.25 in. deep.

 

[kristin]

Just under 2" I suck at reading the marks but if you go by marks it's 1.13"

1.13" would be just over 1" not "just under" 2 inches? You lost me, lol!

They must vary, because someone else told me 1.02" thickness for the eGo.

 

[Wolf]

I will have to find a ruler. I'm using a Silver Bullet with adapter to 801 atty with cart. Not certain, yet, but I think it's pretty close to 8". Be back shortly.

ETA: Length: 7 7/16" Diameter: 1 1/8"

 

[kristin]

The one I'm currently making is big. It's about 5 to 6 in. high by 2.5 to 3 in. wide by about an 1.25 in. deep.

Holy cow! I'm not sure I get the numbers - what's the difference between "wide" and "deep". What are you measuring? Wouldn't the width be the same as depth ie. diameter? Or is it flat and not round?

Do you have any other current mods you own that you can tell me the measurements of?

 

[JetsFan]

My KR-808 Mega battery w/ 510 adaptor, plus 510 atty & cart = just about 6.25". The Magnum from Nhaler may be a tad longer than that (using the same battery).

 

[Ladycats]

Thank you!!

So the Prodigy V2, with an 801 atty is 6", not including the mouthpiece, correct? Then altogether may be closer to 7" long with the mouthpiece?

Do most people use an 801 setup with the Prodigy do you think?

Also, is the V1 longer or shorter than the V2? And how wide/thick is it?

Kristin, I'm going to make a wild guess here, and say most people go with the 510 on the V2 .... but that's just a guess based on what I read on the PS forums ...

The V1 is just a tad taller than the V2 .. hardly worth mentioning .... but it is "fatter" ... it's about 7/8" wide ...

 

[kristin]

My KR-808 Mega battery w/ 510 adaptor, plus 510 atty & cart = just about 6.25". The Magnum from Nhaler may be a tad longer than that (using the same battery).

Thanks! What is the diameter?

 

[kristin]

Kristin, I'm going to make a wild guess here, and say most people go with the 510 on the V2 .... but that's just a guess based on what I read on the PS forums ...

The V1 is just a tad taller than the V2 .. hardly worth mentioning .... but it is "fatter" ... it's about 7/8" wide ...

Thanks ladycats - I appreciate you taking the time. Is the V2 about 7/8" thick, as well?

Is that a V2 in your avatar? Very pretty!

 

[Elendil]

Keep in mind those folks using a 510 device (like a v2) that are using an adapter for cartos. That will add some length.

 

[kristin]

Keep in mind those folks using a 510 device (like a v2) that are using an adapter for cartos. That will add some length.

Crud.

OK, so I need to know how long a V2 with a 510 + adapter would be all assembled then!

(Thanks, Elendil)

It sounds like a few of these could get as long as 7 inches! 8-o

 

[JetsFan]

Its a standard KR-808 battery - very slim. About 1/4" diameter or less, I'm estimating.

 

[kristin]

Its a standard KR-808 battery - very slim. About 1/4" diameter or less, I'm estimating.

Thanks - that helps!!

 

[Dudeman]

The eGO's width is 14mm. Someone needs a new ruler..err.. wait I have something for THAT ruler to measure

Edit.. She meant 1.13 centimeters I think.