Hussar Project X RTA Clone (by Coppervape)
- Thread starter rifky
- Start date
- th_trl_thread_readers 0
-
- Tags
- coppervape hussar rta
- Status
Awesome Zazie!!!
I hope you like it. I seem to recall you and @AngeNZ , and others, have similar tastes tank wise and vape styles. It is really easy to build on. I know you are on a big time building mission and you will nail this. Watch Todd's video (you most likely have already) and you will be all set.
What Vazzling did you get???
Gray satin regular and the one @Heartsdelight linked to. I bet the Vazzling would looks nice on my matte silver ProVari mini. The other is destined for either my gray Colossal or the JAC.
Lol! I ordered the grey satin for my ProVari Mini
I will pick up the Vazzling one after my grey satin one arrives
Welcome to the Project X club - you too @Nailz & @Jumpin' In... I'd hand out t-shirts but @ShowMeTwice hasn't sewed them yet
I saw the hammered version today too - it's awesomely different
My satin gray matches perfectly with the vaporesso luxe nano, so my next one (if I don't get roped into buying an ehpro true 
) is gonna be shiny silver.And I agree with all your comments @ShowMeTwice - the flavour is definitely RDA like. I use a hadaly for mix testing, and I get just as good flavour from the project x
Plus I'm over my two week honeymoon period now, and it hasn't ...... me off once, so it's a keeper
Oh no--what if we show up at the Project X annual gala vaping identical setups!Lol! I ordered the grey satin for my ProVari Mini
I will pick up the Vazzling one after my grey satin one arrives
Very funny!!!Welcome to the Project X club - you too @Nailz & @Jumpin' In... I'd hand out t-shirts but @ShowMeTwice hasn't sewed them yet
Wife used to have a real nice sewing machine she inherited.
Only thing, wifey never knew how to use it.
She could turn it on but then... But I do know someone here who does know how to sew and is very talented...Chanelvaps. We don't need to sew them though.
I could try but you will have to send me much freshly cut cotton.
Hope those shears are sharp!!!
You know, if I can find a decent hi-res pic of something close to what we have and fix it up I will go and get one made. Just to rub it in.
And who knows xmas is just around the corner. Food for thought... or tee's for xmas...
Very funny!!!
Wife used to have a real nice sewing machine she inherited.
Only thing, wifey never knew how to use it.
But I do know someone here who does know how to sew and is very talented...Chanelvaps. We don't need to sew them though.
I could try but you will have to send me much freshly cut cotton.
Hope those shears are sharp!!!
You know, if I can find a decent hi-res pic of something close to what we have and fix it up I will go and get one made. Just to rub it in.
Food for thought... or tee's for xmas...
Let me work on the logo - you can then work on the T-shirt
Perfect ... you bring the booze and we'll have the red carpet all set for both of you.
And t-shirts...
With everyone's new Project X's coming it will be fun to see who gets theirs first.
Now we just need a webcam installed at FT, Nanjing, Shenzhen and for @Heartsdelight Beijing so we can monitor them.
Great news, someone asked on the Coppervape Hussar Project X thread section if FT will be getting the clear tank sections & he (@Megaphile) posted a pic of the authentic & @anniepan answered. They will be contacting their manufacturer to see if they will produce.
The clear tank section looks fantastic with the SS.
Still tuned......
The clear tank section looks fantastic with the SS.
Still tuned......
Got the long wait of it getting here, but least FT was fast shipping it out though, just got up to a shipped email from them
Oh wow
His pic didn't show, so here's the original rta with the clear tank from fb. It looks awesome, no more checking the juice tide lines
@AngeNZ ... you asked if anyone had the Hussar RDA v1 after the thread was reopened. I finally received mine today and it is AWESOME.
I dripped with it for a while and then switched over to squonking. IMO it offers a perfect MTL vape. Open MTL is nice and airy. You can close it down to a very tight restricted MTL. RDL is nice and smooth as is DL. Flavor is on par with the Creek RDA. I am vaping a creamy vanilla ice cream DIY and it is awesome with flavor!!!
The Hussar RDA v1 top cap has a reduced inner chamber (enhances flavor) and is very comparable to the Creek with its reduced chamber installed (part of the MTL kit).
It is just as easy to build on as the Project X and as easy as any RDA I have.
I am running a 0.5Ω 3mm ID 24g kanthal coil and cooking along at 26w. The same build as on my Project X.
Here is a photo of the deck. Very similar to the Project X.
And on top of a 1 of 1 Luna also received today...
I really love the Luna's ... this is my 4th.
I think you would like it... so would your Uncle Bob.
I dripped with it for a while and then switched over to squonking. IMO it offers a perfect MTL vape. Open MTL is nice and airy. You can close it down to a very tight restricted MTL. RDL is nice and smooth as is DL. Flavor is on par with the Creek RDA. I am vaping a creamy vanilla ice cream DIY and it is awesome with flavor!!!
The Hussar RDA v1 top cap has a reduced inner chamber (enhances flavor) and is very comparable to the Creek with its reduced chamber installed (part of the MTL kit).
It is just as easy to build on as the Project X and as easy as any RDA I have.
I am running a 0.5Ω 3mm ID 24g kanthal coil and cooking along at 26w. The same build as on my Project X.
Here is a photo of the deck. Very similar to the Project X.
And on top of a 1 of 1 Luna also received today...
I really love the Luna's ... this is my 4th.
I think you would like it... so would your Uncle Bob.
Last edited:
@AngeNZ ... you asked if anyone had the Hussar RDA v1 after the thread was reopened. I finally received mine today and it is AWESOME.
I dripped with it for a while and then switched over to squonking. IMO it offers a perfect MTL vape. Open MTL is nice and airy. You can close it down to a very tight restricted MTL. RDL is nice and smooth as is DL. Flavor is on par with the Creek RDA. I am vaping a creamy vanilla ice cream DIY and it is awesome with flavor!!!
The Hussar RDA v1 top cap has a reduced inner chamber (enhances flavor) and is very comparable to the Creek with its reduced chamber installed (part of the MTL kit).
It is just as easy to build on as the Project X and as easy as any RDA I have.
I am running a 0.5Ω 3mm ID 24g kanthal coil and cooking along at 26w. The same build as on my Project X.
Here is a photo of the deck. Very similar to the Project X.
View attachment 825221
And on top of a 1 of 1 Luna also received today...
View attachment 825223
I really love the Luna's ... this is my 4th.
I think you would like it... so would your Uncle Bob.
Big sigh of relief from me - I took a gamble ordering this RDA with my first squonk mod, but I'm so glad to see it's a flavour squonking banger
I'm amazed it's on par with the Creek, didn't expect that at all. I was just hoping for a good flavour RDA that behaved while squonking
Edited to add: Your latest Luna is STUNNING
Hi will the MTL- version of X work with single airflow hole? I hear the is 0.8mm inserts but if you get air from both sides 2x0.8mm it's too much for me.
Update: My Coppervape Hussar Project X will be delivered today! Yay!
Can't wait to hear your thoughts
On the 3fvape under the listing for the 0.8mm AF inserts it says:
The Coppervape replacement airflow pins are constructed from PEEK. The replacement airflow pins feature 0.8mm airflow hole, which corresponds to a single 1.1mm hole. The replacement airflow pins is suitable for Coppervape Hussar Project X MTL RTA. 2 PCS per pack.
Don't see why it wouldn't work with one airflow hole blocked by an insert if that is still not tight enough.
Fasttech has both here:
$21.99 Coppervape Hussar Project X Styled MTL RTA Rebuildable Tank Atomizer - 2ml / 316 stainless steel + PEI / 22.5mm diameter at FastTech - Worldwide Free Shipping
$2.25 Coppervape Replacement Tight Airflow Pins for Hussar Project X MTL RTA (2-Pack) 2-pack - 0.8mm at FastTech - Worldwide Free Shipping
- Status
