Hussar RTA single coil deck (attack of the clones)

[52anddone]

WoW !! Ya'll have me really excited about this Hussar (CopperVape from FT). I'll be digging into mine later today and prolly be posting about it tonight. So far, from what I am reading here, this has potential to be a good one, FINALLY !! So many of these MTL rta's have good hype, but when actual users, and not reviewers, get them into their hands, they are a FAIL. This sounds promising though, as evidenced by the postings of Nailz and others. I'm AMP'd. Catch Ya'll Later, and Thanks.

 

[Fad]

Thread subscribed - I have one on the way so will be checking on what people have to say.

 

[ToolmanTexas]

WoW !! Ya'll have me really excited about this Hussar (CopperVape from FT). I'll be digging into mine later today and prolly be posting about it tonight. So far, from what I am reading here, this has potential to be a good one, FINALLY !! So many of these MTL rta's have good hype, but when actual users, and not reviewers, get them into their hands, they are a FAIL. This sounds promising though, as evidenced by the postings of Nailz and others. I'm AMP'd. Catch Ya'll Later, and Thanks.

The 1.3 air reducer and nano kit is what made me throw down in it.

 

[benley73]

[emoji35][emoji24][emoji24] still waiting on delivery of mine , said posted over seas start of last week an tracking has not been updated since ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[rifky]

After many wicking tipe , I found this methode is the best

 

[benley73]

View attachment 649569 After many wicking tipe , I found this methode is the best

Is that spica deck

Sent from my ONEPLUS A3003 using Tapatalk

 

[rifky]

Is that spica deck

Sent from my ONEPLUS A3003 using Tapatalk

No , its hussar rta deck

 

[rifky]

View attachment 649569 After many wicking tipe , I found this methode is the best

Take a look here, this is where many people are made a mistake wicking hussar (including me) . Many people packing cotton and covered all wicking slot. I do that too and it make a dry hit or muted flavor. The most effective wicking from my opinion is right there. The wick is just covered the juice channel and not all deck, so when the coil are heaten the juice directly inject the wick so the wick will stay wet and produce a great flavor. Really worth to try

 

[JustWondering1]

Take a look here, this is where many people are made a mistake wicking hussar (including me) . Many people packing cotton and covered all wicking slot. I do that too and it make a dry hit or muted flavor. The most effective wicking from my opinion is right there. The wick is just covered the juice channel and not all deck, so when the coil are heaten the juice directly inject the wick so the wick will stay wet and produce a great flavor. Really worth to try

How do you get your wick to stay where you want it to stay? Do you trim the tails into a V the way I've seen P. Busardo do?

 

[Ste303]

Argh still waiting for my coppervape hussar from gearbest it was shipped on the 7th. Im going to use this driptip until I get the other topcap I've ordered from fasttech $2.73 316 Stainless Steel 510 Drip Tip - 9mm at FastTech - Worldwide Free Shipping

 

[52anddone]

Finally able to post, I've been away since Friday, and of course my Coppervape Hussar from FT arrived on Saturday . I am wicking like @rifky and seem to get a pretty good moist vape out of it. I made a 3mm NiCr coil and wicked with KGD and am getting a real nice TC vape. One thing I noticed when I initially took my Hussar apart is that on the positive post, just under the 510 screw, the post has a sprew point (looks like a forging sprew tit) in the center, barely noticeable, and when screwing down the 510 screw that sprew point is the only contact between the center post and the 510 (not counting the threads themselves that is). So, I filed it down so the post is flat and smooth and in full contact with the 510 screw, my thinking is that left with only the sprew point to contact the 510 screw that it would be a bad connection for TC, so I filed it down flat. Anyway, here's some pic's of my setup.









The last pic is of a KFv4 drip tip, seems to look/work pretty good. I seem to have the hardest time shooting a straight pic these days, sorry about that, I will try harder next time though.

 

[rifky]

Finally able to post, I've been away since Friday, and of course my Coppervape Hussar from FT arrived on Saturday . I am wicking like @rifky and seem to get a pretty good moist vape out of it. I made a 3mm NiCr coil and wicked with KGD and am getting a real nice TC vape. One thing I noticed when I initially took my Hussar apart is that on the positive post, just under the 510 screw, the post has a sprew point (looks like a forging sprew tit) in the center, barely noticeable, and when screwing down the 510 screw that sprew point is the only contact between the center post and the 510 (not counting the threads themselves that is). So, I filed it down so the post is flat and smooth and in full contact with the 510 screw, my thinking is that left with only the sprew point to contact the 510 screw that it would be a bad connection for TC, so I filed it down flat. Anyway, here's some pic's of my setup.

View attachment 649919

View attachment 649921

View attachment 649923

View attachment 649925

The last pic is of a KFv4 drip tip, seems to look/work pretty good. I seem to have the hardest time shooting a straight pic these days, sorry about that, I will try harder next time though.

Yes its true, its the most moisture methods

 

[benley73]

Sent from my ONEPLUS A3003 using Tapatalk

 

[soulseek]

Sent from my ONEPLUS A3003 using Tapatalk

I'd recommend the Amerpoint tanks or "rdas" over this; either the Nectar or the Vector. They're tried and tested, cheaper and really worth it.

 

[52anddone]

I think I forgot one thing in my initial post ^^^ above about my Coppervape Hussar, and that was in my little box the Hussar came in from FT, I got (1) SS tank and (2) spare PC tanks. $19.79 Coppervape Hussar Styled RTA Rebuildable Tank Atomizer - 5.7ml / stainless steel / 22mm at FastTech - Worldwide Free Shipping

 

[rifky]

Increase flavor with micro tank. The setup is now completed Tips: change the o ring for easy juice control movement.

 

[ToolmanTexas]

Increase flavor with micro tank. The setup is now completed Tips: change the o ring for easy juice control movement.

Looks good, so smaller chamber/tank in your opinion increased flavor? Are you also using 1.3 airhole?

I"m hoping for a KFL type of draw and flavor.

 

[benley73]

Mine has finally landed , will make a build tonight for it

Sent from my ONEPLUS A3003 using Tapatalk

 

[52anddone]

Mine has finally landed , will make a build tonight for it

Sent from my ONEPLUS A3003 using Tapatalk

Looking Good benley, looking good.

 

[52anddone]

I have a spaced 3mm NiCr coil in mine and had no problems fitting it in there, so any coil up to 3mm (spaced or contact) should work out fine for ya.

Edit: I'm talking about 28g and smaller wire (even 30g twisted will work out good), not the bigger stuff like 26g and thicker.