I taste MVP?

Status
Not open for further replies.

Butters78

Vaping Master
ECF Veteran
Verified Member
Jan 24, 2012
7,236
10,787
47
San Antonio, Texas, United States
Bui
They sell replacement heads for them.

The T3s are just okay IMO. I don't like the draw. It's to airy for me.

Good deal. I've just been on a rebuild kick lately with the novas and rba's. Keeps my mind busy and saves me some cash. I'm not really a fan of an airy draw myself. That's why I never got a zap.
 

frankfennel

Senior Member
ECF Veteran
Mar 19, 2013
147
16
US
If it's a single coil, I say bottom coils (Kanger T3/evod/protank, MT3) are much better, no tipping to soak wick and constaant great vapor and no gurgling if your wicks are just right. But these dual coils might be worth it to tip them. Maybe a dual coil bottom coil's possible. Pbusardo had me going for a minute with his april fools video of the 'new wickless, wire-less tank so secret it had to be wrapped in tin foil" video.

I'm still wondering what the mahs are:

"Hi ,
we make statement of this issue time ago , the MVP’s standard size battery is real 2600mAh , we open mold and order customize battery like that. however , MVP is VV product , need for high-current discharge , ordingly discharge battery can not meet 5V , The battery supplier produce battery depend on 2600mAh standard, You know , high-current discharge will lose about 15% , 2600x0.85=2210mAh , 2210mAh is precise MVP high-current discharge capacity .

Any questions or assistance , please let us know freely .
Sincerely yours ,..."



"2210mAh is precise MVP high-current discharge capacity"
"the MVP’s standard size battery is real 2600mAh"

So which is it?
Really 2210 mah falsely advertised at 2600?
Or 'real 2600mah' but loses about %15 on high volt/watt setting that make it only 2210 mah or something like that?
 

Butters78

Vaping Master
ECF Veteran
Verified Member
Jan 24, 2012
7,236
10,787
47
San Antonio, Texas, United States
Went out today and it worked great. Usually when I have my provari or ea I can feel it with the mvp I had to keep checking my pocket if it's still there. I tried the dual clearo it came with I've never tried anything dual coil before it works pretty decent. For the hell of it i tried my generic car charger on it and it worked. Great back up if the battery ever dies lol.
 
Last edited:

djtonyb

Super Member
ECF Veteran
Verified Member
Mar 19, 2010
796
883
Big Pine Key
Verified: the iClear 16 heads do work in the iClear 30. There are some vendor sites that say they are not interchangeable, but other than the number of strands in the wicks, they work just fine in either clearo. The MVP is one nice little mod for the price! I'm planning on buying another one as a backup as soon as I have the cash. I love reading about some of the other, more complex mods with removable batteries and variable wattage and such, but I just wanted a simple approach to VV that will work as a passthrough and use a standard usb cable to charge. I am so glad I passed on the eGo batteries and went straight to the MVP from my Kanger S2!
 

Butters78

Vaping Master
ECF Veteran
Verified Member
Jan 24, 2012
7,236
10,787
47
San Antonio, Texas, United States
Verified: the iClear 16 heads do work in the iClear 30. There are some vendor sites that say they are not interchangeable, but other than the number of strands in the wicks, they work just fine in either clearo. The MVP is one nice little mod for the price! I'm planning on buying another one as a backup as soon as I have the cash. I love reading about some of the other, more complex mods with removable batteries and variable wattage and such, but I just wanted a simple approach to VV that will work as a passthrough and use a standard usb cable to charge. I am so glad I passed on the eGo batteries and went straight to the MVP from my Kanger S2!

I'm really happy with mine too Tony. Once I get this diy thing down I'll be in heaven!
 

Butters78

Vaping Master
ECF Veteran
Verified Member
Jan 24, 2012
7,236
10,787
47
San Antonio, Texas, United States
I got my MVP and love it! Vaping 10 months and have a lot of devises all VV and this one is one of the top units. The thing I notice most is that I do not burn up my juice as fast. Maybe because it is true setting when I vape, I am unsure but this is great VV.

Yup, happy with mine as well. I'm still on my charge from Friday night and it's working well still. Would be neat though if instead of a puff counter when you adjust just the voltage the ohms would display and then disappear as soon as you hit plus or minus. That way you know your tank or whatever is still where its supposed to be at. I still test mine on the provari but it's harder for out and about. Oh plus a battery meter when you hold the plus and minus at the same time. Like 1-99. I'm nit picking a little but innokin did a great job.

I nit pick at my provari as well heh.
 
Last edited:

djtonyb

Super Member
ECF Veteran
Verified Member
Mar 19, 2010
796
883
Big Pine Key
I'm really happy with mine too Tony. Once I get this diy thing down I'll be in heaven!

I've been doing DIY for a bit... I try not to get so caught up in getting things down to tenths of mls, I'm looking for simple once again. I got it down to a very simple formula... I like to vape at about 12mg nic 70%PG 30%VG, and while I know how to use the juice calculators, I just want to mix up some joose quickly. I buy my nic at 36mg in 100%pg. I bought a handful of 30ml bottles, and I use a few different syringes to measure. I put 10ml of nic juice, 10ml of VG, and 5ml of PG in each bottle giving me 25ml unflavored juice as a base. That leaves me with 5ml to play with flavorings (I use TFA flavorings in PG for the most part), and if I want to use less than 5ml of flavorings, I just top off with plain PG. So far, I've had pretty good luck with this method, and it makes the math so much easier! (I also am leery of using 100mg nic base. 36mg is safer to work with, and the difference in price is negligible).
 

sdzero

Full Member
Feb 16, 2013
10
3
Ca.
My new favorite setup, it works so good. MVP and Protank!
 

Attachments

  • IMG_20130407_203645.jpg
    IMG_20130407_203645.jpg
    22.9 KB · Views: 32

Butters78

Vaping Master
ECF Veteran
Verified Member
Jan 24, 2012
7,236
10,787
47
San Antonio, Texas, United States
I've been doing DIY for a bit... I try not to get so caught up in getting things down to tenths of mls, I'm looking for simple once again. I got it down to a very simple formula... I like to vape at about 12mg nic 70%PG 30%VG, and while I know how to use the juice calculators, I just want to mix up some joose quickly. I buy my nic at 36mg in 100%pg. I bought a handful of 30ml bottles, and I use a few different syringes to measure. I put 10ml of nic juice, 10ml of VG, and 5ml of PG in each bottle giving me 25ml unflavored juice as a base. That leaves me with 5ml to play with flavorings (I use TFA flavorings in PG for the most part), and if I want to use less than 5ml of flavorings, I just top off with plain PG. So far, I've had pretty good luck with this method, and it makes the math so much easier! (I also am leery of using 100mg nic base. 36mg is safer to work with, and the difference in price is negligible).

I'm lazy. I got tired of measuring the pg vg and base so i ordered a 500ml of 12mg and use super concentrates. I don't care if it drops the nic down a point or two. If I had the patience I'd buy the 100ml base.
 

djtonyb

Super Member
ECF Veteran
Verified Member
Mar 19, 2010
796
883
Big Pine Key
I'm lazy. I got tired of measuring the pg vg and base so i ordered a 500ml of 12mg and use super concentrates. I don't care if it drops the nic down a point or two. If I had the patience I'd buy the 100ml base.

Eggsactly! I don't much mind fiddling with my formula, as it is basically 1/3, 1/3, and 1/3, with the final third balance of flavors vs plain PG being the only fiddly thing. The MVP also fits into that fiddle-free zone... no fooling with changing batteries or custom USB chargers. Now my focus is finding a good delivery device that doesn't take much futzing and can hold at least 3ml, and perform the same from full to empty. The iClear 30 is good, but not quite up to that standard... I do want to try a good RBA, but that brings more futz factor in... LOL!
 
Status
Not open for further replies.

Users who are viewing this thread