iAtty on GGTS What V and Ohm combo are you using?

[silentt]

1.3ohm at around 3.7-3.9volts

 

[Moshmarr]

1.3ohm at around 3.7-3.9volts

This is just what I ended up with, & I love it
No wicking or leaking issues for me, hits real hard, great flavor too.
I do keep the cone quite open, as I use VG only.
I got the ceramic in just fine as well, although it took a while..
Very very happy with the iAtty Imeo, it's a great invention indeed
I always enjoy learning new things, and this device has already taught me a lot lol

 

[Captain Morgan]

I make some experiments with silica rope. Its very good until now. I used this rope in the earlier days. It had a smell so I rejeched but I think it was from the storage on the factory because the inner fibers didnt have that smell, only the outer ones.

Imeo - I wonder if the smell was PTFE that some suppliers coat silica rope with? PTFE is PolyTetraFluoroEthylene, a synthetic fluoropolymer of tetrafluoroethylene well known by the brand name Teflon. If overheated (+500 F), it releases a fluorine containing gas. Usually the supplier will give the buyer the option to have it coated or not.

 

[Rick.45cal]

3.8 Ohms at 6.4 volts is pretty sweet! Good flavor, great throat hit, and tons of vapor. I know just where I like it now, bring on the VV Imeo for the final tweak.

I was thinking last night and today, how awesome it is going to be to have a 100% user servicable PV, VV, and I atty. It will be the ultimate DIY setup!

I think exactly the same Rick. !

 

[imeothanasis]

This is just what I ended up with, & I love it
No wicking or leaking issues for me, hits real hard, great flavor too.
I do keep the cone quite open, as I use VG only.
I got the ceramic in just fine as well, although it took a while..
Very very happy with the iAtty Imeo, it's a great invention indeed
I always enjoy learning new things, and this device has already taught me a lot lol

good Moss, very good buddy

 

[imeothanasis]

Imeo - I wonder if the smell was PTFE that some suppliers coat silica rope with? PTFE is PolyTetraFluoroEthylene, a synthetic fluoropolymer of tetrafluoroethylene well known by the brand name Teflon. If overheated (+500 F), it releases a fluorine containing gas. Usually the supplier will give the buyer the option to have it coated or not.

I dont think so Captain. The external fibers of the rope had the same texture and the same appearance but they had this smell. The internal fibers were ok. Who knows where they store them

 

[dspin]

1.3 at 3.7 - Vapes great - awesome invention IMEO - Thankyou very much

 

[imeothanasis]

If you are happy then I am happy Dspin my good friend!! I am also glad that you got it and vape it

 

[Zoranth]

+1 to this

1.3ohm + 3.7v = Awesome

1.3 at 3.7 - Vapes great - awesome invention IMEO - Thankyou very much

 

[fright88]

Thanks for the advice guys looks like 1.3 on 3.7 it is now to get me a bigger battery.

 

[imeothanasis]

Try even lower resistance guys. Iatty will not bring burned taste at all.

 

[K24A3]

Try even lower resistance guys. Iatty will not bring burned taste at all.

I tried 1.5ohm at 4+ volt and the juice tasted very overcooked, but not burnt. It wicks very well, but you can easily overcook the juice even with the cone unscrewed 1mm+ (which is probably impossible to avoid since you can't really avoid overcooking juice when it is heated too high).

I only wound three wires around the wick and it still produces a large amount of vapor at 1.5ohm / 3.3volt.

Well done Imeo, your design abilities are impressive

 

[imeothanasis]

thanks K2. I am glad to hear that buddy

 

[Zoranth]

Next time I make a coil I am going to try 1.0ohm with 3.7 volts.

On a side note, I made a 1.7 ohm coil and tested it out with 7.4 Volts... Holy Shlt, what a cloud. I had to drip on the coil about every 4-5 draws to prevent it from running dry though. Had the cone open 3 turns

 

[K24A3]

Doesn't the juice taste very overburnt when you overclock it like that?

 

[lorderos33]

Running 1.5 ohm @ 3.7 V. It vapes like a smokestack

 

[Ariel_MX]

1.7ohms @ 3.7volts. Here. Great th and flavor.

 

[Para]

I'm a wuss...........
3.4 ohms @ 4.9 volts delivers warm rich flavor

My eyes would roll back in my head if I tried those low resistance numbers; regardless of the volts..

 

[ggero]

When I take my GGTS/iatty (with 18650) with me, the people are looking to me with curiosity... Consider to use this blue thing!! I think they will call the Police !!!

 

[imeothanasis]

The best set up for me is 2,5 ohm or maximum 3 ohm at 6 volts. Smoke and hit are exactly what I want