**IKV Update**

[Crazy Canuck]

I'm currently waiting on 2 dca's in the mail. I ordered the 1st to have one, then saw the twitter special to get the extra sleeves.

I know it probably won't, but I'm really hoping the largest sleeve works with the i06. I just keep telling myself it will to justify the 2nd purchase


Sent from my iPhone using Tapatalk

 

[Vapian]

I'm currently waiting on 2 dca's in the mail. ...

Might one inquire, from whence these DCA's might be ordered? I found the GSV sight but all is out of stock. ...

 

[loft]

GSV is the main place - others can be had in the classifieds/etc.

 

[mwa102464]

Jason from GoodSenseVapor has blogged about it and he and I have also spoken about it through email. It was supposed to be created/prototyped/etc. I don't know the timeline on it though. Isaac also mentioned it several times. Only saying - since it's not a secret. lol

yes Jason was my source, just didnt want to put that out there just in case it didnt happen Loft ! but now that it's clear I originally inquired about a DCA that fit the i06 since it's my Atty of choice an Jason said that a whole new DCA was going to have to be made for the i06 which makes sense since the i06 is about 9mm or the size of a 510 tube. I've been using my DCA for a couple of week now on my Provari and they do work very nice and adjustable draw is also a nice thing to have and use but a DCA/I06 is definitely now needed in my vaping arsenal. I dont know how much though because we really net about 10-15 dam vapes off of the i06 with just a drip tip so I dont know how much better the DCA will actually make the i06 in reality. Only time will tell I think what Issac's true opinion is whether it's really needed or not for the i06 but they are nice !

 

[snork]

... I dont know how much though because we really net about 10-15 dam vapes off od the i06 with just a drip tip so I dont know how much better the DCA will actually make the i06 in reality. Only time will tell I think what Issac's true opinion is whether it's really needed or not for the i06 but they are nice !

My opinion is that an i06DCA is really needed if just for the fact that it would allow for the use of our favorite 510 drip-tips. I'm loving my 306DCA.

 

[Switched]

I'm currently waiting on 2 dca's in the mail. I ordered the 1st to have one, then saw the twitter special to get the extra sleeves.

I know it probably won't, but I'm really hoping the largest sleeve works with the i06. I just keep telling myself it will to justify the 2nd purchase


Sent from my iPhone using Tapatalk

Sorry CC to burst your bubble but I seriously doubt the larger cone will fit the IO6. It is a different beast altogether. Think 510 size vice 306.

 

[snork]

Sorry CC to burst your bubble but I seriously doubt the larger cone will fit the IO6. It is a different beast altogether. Think 510 size vice 306.

I can confirm that. The largest cone in the Twitter Special is still too small for the i06.

 

[Switched]

Thanks for the confirmation. However a DCA for the IO6 is in the works. IMO though the IO6 doesn't need one.

 

[emonty]

The Glorious IO6 in a Tank, that is what I like!!!

 

[Crazy Canuck]

You weren't supposed to shatter my illusion until I got it! Hehe

Just means I'll end up having three of them


Sent from my iPhone using Tapatalk

 

[Crazy Canuck]

IMO though the IO6 doesn't need one.

My pocket says otherwise. I dripped a bit, then had to run before vaping and a while later I was sitting at my desk and started smelling my juice. Looked down and became sad.


Sent from my iPhone using Tapatalk

 

[mwa102464]

Thanks for the confirmation. However a DCA for the IO6 is in the works. IMO though the IO6 doesn't need one.

I'm tending to agree with this more and more Switcher, though the masses will want it and like it.! I would like to see more of a special custom drip tip for the i06 something like the current style Issac has but with a Ming style top to it

 

[ukeman]

I'm big on Pyrex D/T's ... I'll bet John V will get some going once Isaac opens his doors again.

I'm tending to agree with this more and more Switcher, though the masses will want it and like it.! I would like to see more of a special custom drip tip for the i06 something like the current style Issac has but with a Ming style top to it

 

[ukeman]

although the Pyrex 306 are a bit bulky, and with the i06 thicker than 306, it might be too too bulky.

I'm big on Pyrex D/T's ... I'll bet John V will get some going once Isaac opens his doors again.

 

[loft]

although the Pyrex 306 are a bit bulky, and with the i06 thicker than 306, it might be too too bulky.

It would only be around 1mm greater in diameter I would think... but I'd love to have some pyrex tips for my io6 as well. I've talked to Isaac a couple times about it.

 

[mwa102464]

Uke, I considered the Cherry Vapes "Cannon" to massive and just to big up top,,, but I really think that a "Ming" style with a sleeve underneath of the Ming that covered the i06 would really be a super Drip Tip for this Atty. I have even gone as far as taking a piece of Delrin tubing and cut a piece that slides over the i06 and put a Ming on the top of the sleeve. This is working super on my i06 if I do say so myself, now I just want it in all one piece for an even nicer looking piece for my i06's, I hope Issac will consider this, it makes for a really nice looking drip tip and performs absolutely wonderful.

A Pyrex Ming like this would be super too !

 

[loft]

Black drip tip/sleeve with white whispy lines... oh yes. I agree.

 

[mwa102464]

I'm thinking all one color just like they make the Mings myself Loft, they have 2-3 different colors in some of them and YA it would look really super but more so really perform well, the one I have modded up on my i06 is kicking some Azz and does look really cool, but having to seem the sleeve to the Ming isnt quite as nice as having one in all one piece. Issac I hope you hear this it is one bad ... set up and looks super !

 

[unsure]

I see my 1st io6 in my future very VERY soon..

 

[Crazy Canuck]

I see my 1st io6 in my future very VERY soon..

And you're going to love it!!


Sent from my iPhone using Tapatalk