China shuts down for 2 weeks this time of year, probably still sitting unread in an inbox lol
Indulgence Mt-Rta
- Thread starter 98ruby
- Start date
- th_trl_thread_readers 0
- Status
China shuts down for 2 weeks this time of year, probably still sitting unread in an inbox lol
Thinking I might email them the same request, maybe the more they get the quicker they'll act....
Ask them for a vertical coil while you're at it.
edit; viable premade coils for the mutank would be nice when I'm feeling lazy, as you said.
Done and Done
On a side note my Avocado still hasn't been shipped yet if I'm to believe the USPS tracking site:
"A shipping label has been prepared for your item at 5:56 pm on February 9, 2016 in FEDERAL WAY, WA 98003. This does not indicate receipt by the USPS or the actual mailing date."
So it looks like Tuesday at the earliest, maybe, if it ever ships. Probably could have ordered from China and got it in about the same time.
I guess vapenw is coming off my preferred vendors list.
"A shipping label has been prepared for your item at 5:56 pm on February 9, 2016 in FEDERAL WAY, WA 98003. This does not indicate receipt by the USPS or the actual mailing date."
So it looks like Tuesday at the earliest, maybe, if it ever ships. Probably could have ordered from China and got it in about the same time.
I guess vapenw is coming off my preferred vendors list.
Last time I ordered from VapeNW they dropped it into the mail the next day, but USPS let it sit in Seattle WA for an entire week before forwarding it on to me...
I ordered a new tank from Nw on Monday and it came yesterday? Sometimes you win sometimes you lose lol.
I am pretty sure I emailed before CNY, but they may have left early. But, no response. I will again in a few days when they are getting back into the swing of things.
Got my Diablo tank today. Not sure about it, those juice channels are TINY! Defninately different from my MuTank, MT, and Ohmegas 22mm and 30mm... Built it with 28G ss, but its kinda lacking if flavor. Oh well Ill play with it more this week.
Ok so I think I've found my favorite Clapton wire! It's not Alien, nor is it Fused, believe it or not it's just plain old 26/32 Clapton!
Isn't it pretty? Some of my best work yet! Dual 6/7 3.0ID @ .51 OHMS! Wicked perfectly finally! Chain vaped almost a full tank @ 60w! NO LEAKS, NO DRIPS,NO ERRORS! Sorry no picks of the wicking! Still waiting on my Octoclaptons for the TFV4 & it's killing me!
Isn't it pretty? Some of my best work yet! Dual 6/7 3.0ID @ .51 OHMS! Wicked perfectly finally! Chain vaped almost a full tank @ 60w! NO LEAKS, NO DRIPS,NO ERRORS! Sorry no picks of the wicking! Still waiting on my Octoclaptons for the TFV4 & it's killing me!
Attachments
Just looked at the full size pics I posted & realized why I could never make any money making my own vape stuff! The chatter marks around & inside the airflow would put that atty in at least the seconds box or the scrap bin depending on the day! With all the machining in these things I would have to charge $200 or better for any tank or atty I made! But each one would be a work of art! It's just amazing to me that we get the quality we do for the price we pay! That's why I quit watching You-Tube reviews as much as I used to because of the little things the reviewers were complaining about for the money we pay! The thing that scares me the most is some of the Chinese products quality is getting so good! Ok I'm off on one of my "Old Machinist" rants but when I see the next gen. of Machinists ( computer jockeys with little or no mechanical sense) I feel sad for this country when the last gen. of practical Machinists dies off!
P.S. I'm sure thankful to have a place like this to rant!
P.S. I'm sure thankful to have a place like this to rant!
I also bemoan the death of craftsmanship, but that doesn't stop me from scheming to build a CNC router
Current generation machinists are out there and holding down the fort just fine....Ok I'm off on one of my "Old Machinist" rants but when I see the next gen. of Machinists ( computer jockeys with little or no mechanical sense) I feel sad for this country when the last gen. of practical Machinists dies off!
P.S. I'm sure thankful to have a place like this to rant!
This one's a 30 year old steampunk that sports a blue mohawk sometimes but he's no slouch.
Tyler Strickland | Facebook
Ugh so my rx200 decided to give up the ghost tonight. Out of no where the mod said device too hot, then no atomizer.
I took out the batteries, cleaned the 510 pin with a Q tip, cleaned the 510 on my troll and my tfv4. Sprayed the 510 connector with a can of air. Put it all back together and nothing once again.
Time to email vapenw which won't be open til probably Tuesday and see what they say about swapping it out.
Figures I sold the other 2 mods I had and this is my only one and it quits working. I had such good luck with the other ones that I decided to sell them to friends in need and now I'm mod less.
Hopefully everyone else is having a better weekend then me right now.
Sent from my Nexus 6 using Tapatalk
I took out the batteries, cleaned the 510 pin with a Q tip, cleaned the 510 on my troll and my tfv4. Sprayed the 510 connector with a can of air. Put it all back together and nothing once again.
Time to email vapenw which won't be open til probably Tuesday and see what they say about swapping it out.
Figures I sold the other 2 mods I had and this is my only one and it quits working. I had such good luck with the other ones that I decided to sell them to friends in need and now I'm mod less.
Hopefully everyone else is having a better weekend then me right now.
Sent from my Nexus 6 using Tapatalk
- Status
