Introducing the Precise Strata RDA
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
Couple of coil builds we've been experimenting with. I'm having great results with this top one, I call it the "Snork", since it was his brainchild. Single coil, 1.08ohm, 3mm silica, Ribbon Kanthal .8 x .1.
Cool....David posted one of my vertical dual coil builds!!! That's one less pic I'll have to upload in the future
That's like a light bulb man! Scares the crap out of me.Cool....David posted one of my vertical dual coil builds!!! That's one less pic I'll have to upload in the future
Wick: www.viper-vape.com
Res wire and ribbon: www.temcoindustrial.com
'Course if you dig microcoils, you won't need silica wick. You can use organic cotton balls from the corner drug store.
Tentatively pending final judgment from the guinea pigs, I suggest starting with 34 gauge kanthal a-1 and 3.5mm silica wick. That's a pretty non-exotic combo that has yielded more than satisfactory results on most atomizers I've ever used.
With 2-wraps-over-3 of 34 gauge kanthal around 3 - 3.5mm silica you'll end up with around 1.8 ohms per coil. With a dual coil setup, that's about 0.9 ohms. Now you don't need a meter for your coils.
Sent from my SCH-I405 using Tapatalk 2
Last edited:
Yeah, once I saw the insides of the atty the dual vertical micro build seemed like a no-brainer. That'll be my 1st go when I gets mine. I may have to get some ceramic wick for this thing. Hmm....
I'm stocking up on clearance Halloween candy tomorrow. I don't care what Nach says.
Sent from my SCH-I405 using Tapatalk 2
Sent from my SCH-I405 using Tapatalk 2
Wick: Viper Vape: Premium Vaping Supplies
Res wire and ribbon: TEMCo Industrial Power Supply
'Course if you dig microcoils, you won't need silica wick. You can use organic cotton balls from the corner drug store.
Tentatively pending final judgment from the guinea pigs, I suggest starting with 34 gauge kanthal a-1 and 3.5mm silica wick. That's a pretty non-exotic combo that has yielded more than satisfactory results on most atomizers I've ever used.
With 2-wraps-over-3 of 34 gauge kanthal around 3 - 3.5mm silica you'll end up with around 1.8 ohms per coil. With a dual coil setup, that's about 0.9 ohms. Now you don't need a meter for your coils.
Sent from my SCH-I405 using Tapatalk 2
Hmmm a lot to learn...... What is up with the ribbon Kanthal, Is it better? What is the best wick material? I run my mods Kicked so how about a setup for a 2.4-3.0 ohm RBA.....
When we are done testing. When that will be is totally up to the master creator himself..
We have only had them for 4 days so far.. Rest assured it's getting ran through its paces and pushed to the hilt! I alone have been through 24 different wick, wire and ohm combos so far..
Sounds like your getting burned out there Raq, I can take over from here since you need a break, I believe you already have my address... 
Sounds like your getting burned out there Raq, I can take over from here since you need a break, I believe you already have my address...
I have relocated to an undisclosed and remote location so mail service is a no-go!
Sorry my man!
I have relocated to an undisclosed and remote location so mail service is a no-go!
Sorry my man!
Stork? Pigeon carrier? Where there is a will, there is a way!
Anyone have an idea when we can expect the Simplicity Strata to be up for sale? With only 200, I need to make sure that I have access to the web that day.
- Status
Similar threads
- Locked
- Locked
- Locked
