Introducing the Precise Strata RDA
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
I'm guessing if you used a normal Drip tip vapor would increase but the flavor would diminish. When you funnel the vapor through the vortex screw you are probably losing some to surface cohesion.
I think, maybe, I am.
There no use fighting it, or denying it
Sent from my iPhone using Tapatalk 2
Ahh...just said screw it since there were only 10 strata left (now 9) for the precise+ ...order 18504....sounds like I decided to get into RDAs at the perfect time this go round as it sounds like the strata are starting to ship now...
despite my repeated attempts at the jedi mind trick I am still yet to receive a shipping notice 
It fits longer into the atomizer, surrounding the center post.
Thanks snork, thanks path for the honesty. Have things to do this morning, will decide today what I want to do.
Share with us! You don't have to be cryptic any more! What is this tool you speak of? Describe the Nach Cloud Machine build!
We'll call it the Nach Achieved Cloud Hits build, or we could just call it the Nach build.
That's hot! Glad I broke down and ordered the Ti! Might have to try and talk someone out of their 350 Ti too!Good lord the polished version looks amazing on the Ti's!!
Well, I'm meeting with a guy this Friday to discuss the build. So let me get it learned and installed first and I'll be sure to post pics and more detailed build info.
Just a little tip that I find useful, if using one coil wrapped on one side, note which side the coil is on, screw back on the adjustable draw cap and block the two air holes on the opposite side furthest away from the coil. Included are little rubber plugs, push them in in the air holes and trim them off flush with a razor blade or exacto knife. I'll post a pic here in just a bit.
too small for screws, but the rubber plugs are invisible and insert and remove easily see pics.
I've had mine for a few days now and been experimenting with different setups. Think I've settled on a dual coil (roughly 1.5 ohm) You do need to note where your coils are in relation to the engraved P logo on the side so you can then line up the air holes with your coils. Also I noticed that the height of the coils makes a bit of a difference as well. Keeping them level with the deck seems best for me. I've used a piece of 1mm ekowool triple wrapped so I have 3 small pieces down in the well. This thing holds a LOT of juice too.
Once again another innovative idea from David here. I'm well pleased with the whole package.
Once again another innovative idea from David here. I'm well pleased with the whole package.
First, Keep in mind, the Strata is like nothing you've ever vaped before and what works on other devices may not work on the Strata. The Strata has limitless setup possibilities, so you will need to fine tune it to your liking! Stay patient, don't be afraid to experiment and I guarantee it will become one of the best vapes you've ever had!
Tip of the day, more airflow doesn't necessarily equal more vapor if it isn't hitting the coil. If you find you are only using one coil on one side of the Strata, heres some tips on how to block off air passages.
1. Note the position of your coil on the lower body
2. Screw on the adjustable draw cap
3. Insert the included rubber plugs into the holes opposite the coil (do not trim them flush yet!)
4. Adjust the draw to your liking.
5. Once you have the draw where you want it, you may find you had to open the cap up more, which may necessitate you moving the plugs to make sure you are plugging the one, two or three holes furthest from your coil. (I block two, but you may find you like differently)
6. Trim the plugs flush with an exacto knife (they'll pop right out with the exacto knife tip too).
Some other random tips:
-Position your coils about flush with the deck
-Position them as far out towards the edge as possible.
Here are the included plugs:
Next put the plugs in the holes you want to block:
Next trim off flush (removal is easy too, just use the tip of the blade to pop out):
Tip of the day, more airflow doesn't necessarily equal more vapor if it isn't hitting the coil. If you find you are only using one coil on one side of the Strata, heres some tips on how to block off air passages.
1. Note the position of your coil on the lower body
2. Screw on the adjustable draw cap
3. Insert the included rubber plugs into the holes opposite the coil (do not trim them flush yet!)
4. Adjust the draw to your liking.
5. Once you have the draw where you want it, you may find you had to open the cap up more, which may necessitate you moving the plugs to make sure you are plugging the one, two or three holes furthest from your coil. (I block two, but you may find you like differently)
6. Trim the plugs flush with an exacto knife (they'll pop right out with the exacto knife tip too).
Some other random tips:
-Position your coils about flush with the deck
-Position them as far out towards the edge as possible.
Here are the included plugs:
Next put the plugs in the holes you want to block:
Next trim off flush (removal is easy too, just use the tip of the blade to pop out):
Last edited:
That's gotta be the most gorgeous piece of machining I've seen in a long while! Incredible job David!! I can't wait to set mine up!
- Status
Similar threads
- Locked
- Locked
- Locked
