put the tape on the inside of the cone instead of the vision. easy peasy.
but i think BK is talking about
wait for it...
C O L O R S
but i think BK is talking about
wait for it...
C O L O R S
Last edited:
- Status
QUESTION! how tight is that seal between the mouthpiece and the tube? with the gigantic fill holes, i suspect liquid would easily slip thru the gap between the mouthpiece and tube is the seal between them wasnt that snug.
no thats the cool part, you can hold this baby upside down and nothing, juice is meant to flow freely in that area and it stays under the mouth peace seal and its all sealed so no juice comes out or in the mouth peace, trust me when you see how it works it will amaze you. i first looked at them when testing them weeks ago and before using it i was thinking the same thing you where and then i saw exactly whats going on and how its all sealed and it just amazing.
I got mine today. They seem to work at least as well as the Vision 1.0. The one thing I noticed right away was that the wicks in the Deux (at least the 4 that I got) are no thicker than the wicks in the ver. 1.0
Surprising considering the photo in the ad @ GV that shows the Deux with very fat wick
Here's a pic of the two side by side...The 1.0 is on top, the Deux below. The wicks are identical.
Surprising considering the photo in the ad @ GV that shows the Deux with very fat wick
Here's a pic of the two side by side...The 1.0 is on top, the Deux below. The wicks are identical.
Attachments
they look the same but are not, its not thicker by much but its 2 different wicks from the same company, your more then free top open it up and count the strands., i think something like 5 strands or 6 to be exact. The point is they are fat wicks.
Now how do you like the new inner plug and mouth. How is it performing for ya.
and by the way your showing us a picture of wet wicks, the one on the site is a dry, so it will obviously look fatter dry then when they are wet.
Now how do you like the new inner plug and mouth. How is it performing for ya.
and by the way your showing us a picture of wet wicks, the one on the site is a dry, so it will obviously look fatter dry then when they are wet.
Last edited:
Hey bad why did you have to go and remove all of my issues from the vision?? What am I gonna gripe about now? I guess those damned kids on my lawn are gonna get it now!
My issues with the original vision were the juice getting into the mouthpiece area, and then because the air passage was down at the bottom of the mouthpiece juice would get pulled up and out the mouthpiece. And there was actually too much wicking going on and flooding a bit... not a problem you would normally expect with a top coil. The performance was good on them though.
With the redesign I'm happy to say that they really took care of the issues. The filling is so easy now it's just perfect. The mouthpiece seals the heck out of the tube too. I did have to pull the cup plug up a bit to get the wicking I wanted but that too is a snap with these. Now there isn't any space between the plug and mouthpiece. (the space wasn't an issue just info) The performance vapor wise is right around a ce2 of the same resistance (great thing) Condensation there is a little in the mouthpiece but with the redesigned mouthpiece this won't be an issue at all. I have a feeling excess will just make it's way to the coil anyway. So basically the redesign has made the vision as perfect as I want it to be. I bet the wicks are bigger in these but since mine at least had some primer in it the wicks were wet and therefore hard to tell the difference. My vision did come with a crack at the base, but it hasn't been an issue yet. I have extra tubes so happy as can be.
Great flavor, great vapor, easy to fill, no leaks, great wicking just like the original, great modding potential if you're into that, easy cleaning like a ce2, seemingly robust coil (my vision 1.0 is still just fine, never had to clean yet), The drop in resistance even though it's slight seems to have added a little umph on my ego, high capacity, do I have to go on?? This is a keeper if there ever was one. Thankyou and congrats on a great great product gotvapes.
My issues with the original vision were the juice getting into the mouthpiece area, and then because the air passage was down at the bottom of the mouthpiece juice would get pulled up and out the mouthpiece. And there was actually too much wicking going on and flooding a bit... not a problem you would normally expect with a top coil. The performance was good on them though.
With the redesign I'm happy to say that they really took care of the issues. The filling is so easy now it's just perfect. The mouthpiece seals the heck out of the tube too. I did have to pull the cup plug up a bit to get the wicking I wanted but that too is a snap with these. Now there isn't any space between the plug and mouthpiece. (the space wasn't an issue just info) The performance vapor wise is right around a ce2 of the same resistance (great thing) Condensation there is a little in the mouthpiece but with the redesigned mouthpiece this won't be an issue at all. I have a feeling excess will just make it's way to the coil anyway. So basically the redesign has made the vision as perfect as I want it to be. I bet the wicks are bigger in these but since mine at least had some primer in it the wicks were wet and therefore hard to tell the difference. My vision did come with a crack at the base, but it hasn't been an issue yet. I have extra tubes so happy as can be.
Great flavor, great vapor, easy to fill, no leaks, great wicking just like the original, great modding potential if you're into that, easy cleaning like a ce2, seemingly robust coil (my vision 1.0 is still just fine, never had to clean yet), The drop in resistance even though it's slight seems to have added a little umph on my ego, high capacity, do I have to go on?? This is a keeper if there ever was one. Thankyou and congrats on a great great product gotvapes.
another question, how's the wicking action on these? do you gotta lift up the fill plug to relieve stress on the wicks?
Each one will be inspected before shipping for major cracks, I was extremely busy and wasnt able to check every single one but that is being done now so no worries on future orders. This wasnt a issue with the first version and well make sure it isnt a issue with this one, if a few slipped by me I will take care of it.
Performance wise these rock and like you said the new improvements are a vast improvement over the first vision and yeah if the wick are wet you cant tell them apart but believe me I have no reason to tell you guys they are strands thicker if they wherent, its not like they are double thicker then before, they are just 5 to 6 or 7 strands more, there was another wick that was 20 strands more but for some reason it would flood the coil area so we stuck with the newer one in it now, same company and all.
Thanks again and vape on.
Performance wise these rock and like you said the new improvements are a vast improvement over the first vision and yeah if the wick are wet you cant tell them apart but believe me I have no reason to tell you guys they are strands thicker if they wherent, its not like they are double thicker then before, they are just 5 to 6 or 7 strands more, there was another wick that was 20 strands more but for some reason it would flood the coil area so we stuck with the newer one in it now, same company and all.
Thanks again and vape on.
I did pull the plug up a smidgen, I think it will depend on the specific vison. The wicking is better than a ce2 for sure. My vision 1.0 wicking was almost too good and I had to push the plug down to pinch the wicks off a bit haha. Even if you do need to pull the plug up a little it is very easy to do with the big ol' fill holes. Using it at 4.2-4.5 not sure which on a 5v pass on a usb battery pack and it hits sooo good. I think you will be pleasantly surprised by the vision in all respects.
I just took them out of the packaging and took the picture, obviously they come wet. To my eyes, both wicks in the pic I took look just like the ver. 1.0 wick shown in the ad picture on the site. If you say they're not, again, you know the product better than I do.
I'm happy w/ the Visions...I was merely making an observation.
No worries I'm happy as a clam...doing whatever happy clams do...probably the same thing as angry clams but I'm a happy one. Yup performing as good or better than anything else I've tried. I would go as far as to say it should be the gotvapes flagship. If there are other things that work as well as this on the way this year is what I've been waiting for. For the first time in years I'm content with a carto that isn't a MiT ce2. This is awesome. Oh god I've gone through half a tank and I've only had this for ten minutes! gotta slow down.
oh yeah rumble, i fully understand , they do look identical, they are form the same wick factory and they do come in many size difference, meaning same look, braided but thinnner or thicker by strands and then you need to test them all to see which performs better becuase for some reason a slight change in wick can ruin it or make it shine.
Actual rumble thats our fault , in our wording we did put fatter wick, so people will assume its much fatter and for that i apologize, it wasnt word trickery on our part, just that the vision uses a fatter wick compared to everyone elses and that its slightly different form the vision1.
Condensation will build in the mouth peace, i think thats pretty normal form everyone's results but this new mouth peace and the design itself with the innerplug hasnt had the juice in mouth syndrome or condensation in mouth syndrome which is important cause i hate juice in mouth.llolol
im very happy you guys approve, thank you rumble and half2doit , it means alot to us.
Actual rumble thats our fault , in our wording we did put fatter wick, so people will assume its much fatter and for that i apologize, it wasnt word trickery on our part, just that the vision uses a fatter wick compared to everyone elses and that its slightly different form the vision1.
Condensation will build in the mouth peace, i think thats pretty normal form everyone's results but this new mouth peace and the design itself with the innerplug hasnt had the juice in mouth syndrome or condensation in mouth syndrome which is important cause i hate juice in mouth.llolol
im very happy you guys approve, thank you rumble and half2doit , it means alot to us.
here is a tip guys, after vaping on it for a long long time you can sometimes build pressure in the vision 2 becuase of the new seal and you might feel like its a little tighter draw then when you first started, simply lift the mouth peace and then press it back and its back to normal. the pressure has been released. wierd but true.
Last edited:
Yup I noticed that a bit and doing that helped. These things are by far the best carto I've used and they're 3.5 mil!!! Great job Chris and Dan. Just need to watch for cracks like you said and these are good to go.
Sent from my Samsung Galaxy Tab 10.1 using Tapatalk
Yes no worries, we have a good relationship with this company and are watching us here, as you can see the first vision had virtually no cracks, so they are aware and ill check them and they will make sure it isnt a issue.
Yeah its a beast jamezelle, im swapping between sapphire ,vision deux and the t2p2, the vaping game has changed forever.
keep vaping.
Yeah its a beast jamezelle, im swapping between sapphire ,vision deux and the t2p2, the vaping game has changed forever.
keep vaping.
You guys are making me regret not adding one to my order yesterday... oh well, next payday maybe
Why are they putting primer in these? I HATE primer! I don't remember my ver 1 Vision having any primer in it. I still have it and it works as good as it did day 1 without having to clean it yet.
I haven't even fired up my turbine 2 yet. Still running on this visions duex I filled when I got it yesterday lol. Everyone should get at least one of these bad boys!
Sent from my Samsung Galaxy Tab 10.1 using Tapatalk
- Status
Similar threads
- Locked
