iTaste VV by Innokin !!

Status
Not open for further replies.

tronny

Full Member
Nov 15, 2011
42
19
35
montreal quebec
Word of warning, ive had my Itaste for about a month now. They break very easy. Mine is all gutted out now from a simple trip to the floor. I know most know you shouldnt drop your e-cig on the floor but just warning everyone. Ive dropped my Ego-T many times and this box mod a few times already and it didnt break. I dropped the Itaste once and it fell apart and all the wires disconnected. Im sure a little soldering could fix it but w/e. Just warning you guys.
this is a little disturbing, what kind of floor was it? hardwood? concrete? please dont tell me its plush carpeting :blink:. also how high was it dropped from? i think i will still order cuz i was thinking of getting this more as an at home fancy vape or an at work stealth vape, rather then something im gonna take out everywhere. But, for somehting with that much chrome and magnets i figured it would be relatively stable, is the rest of the body just hard plastic with the finish painted on? OH and which finish do you have? i feel like they might use slightly different material for the chameleon and pearl finishes then the black one.
 
Last edited:

IxJxOxHxNx

Senior Member
ECF Veteran
Verified Member
Feb 8, 2012
232
108
44
Levittown, PA
Dropped about 3 feet onto a tile floor. It landed right on the .... of it and the screen piece slid right out and wires tore from it. Whatever the reason i was out $70 and even more ...... the find a new replacement for just a battery at around $40+. Lesson learned. Was just saying its not as immune to dropping as other batteries i own. If you want to buy one because you like it thats good. Just dont drop it!
 

Novcon

Super Member
ECF Veteran
Verified Member
Jul 30, 2012
708
1,086
Indiana
Hi all, I just received my Itaste's. I ordered one in black for work with the tank system and one in chameleon for home with the tidy 10 cartos. I have only used these for one day, but I have found some interesting things. First I'll talk about the tank system. I filled the tank, primed the atty with a couple of drops, and was ready. After about 5 or so hits, I started getting a burnt taste and no vapor. The tanks seem to build an air pocket that blocks the flow of juice to the atty. if you hold the tank upright and flick it lightly with your finger, you will see bubbles rising to the top. Be careful to only flick it a couple of times or the juice will start running out. Ok, on to the next issue. I noticed some condensation in the tip of the tank, and sometimes you get a little in your mouth. ( DOUBLE YUCK ) if you lightly bite on the mouthpiece, a little plastic piece comes out, throw it away and the problem is solved. I ran 4 tanks through it with no problems at all.

Now for the tidy 10 cartos. So far put of the 5 that I received, 4 have leaked all the juice out of the battery connector. I spoke with the vendor and they are going way above the call of duty. They are sending me 5 more to test. These cartos have a stiff draw, but not unbearable by any means. By the way the tidy 10 will allow using the cap. The tidy 12 will NOT work with the cap.

The battery itself is awesome. Build quality looks good, it's solid and the magnet connection is very handy and works well. I find that the charger seems a little be cheesy and I'm not fond of the pin connection. A micro USB would be much better, but might ruin the look of the device.

The build quality is very good, but it's not a Provari. But my Ford is not a Ferrari either. lol

I hope this helps with any questions.
 

dragonbone

Vaping Master
ECF Veteran
Verified Member
May 21, 2009
4,104
3,849
Somewhere
Hi all, I just received my Itaste's. I ordered one in black for work with the tank system and one in chameleon for home with the tidy 10 cartos. I have only used these for one day, but I have found some interesting things. First I'll talk about the tank system. I filled the tank, primed the atty with a couple of drops, and was ready. After about 5 or so hits, I started getting a burnt taste and no vapor. The tanks seem to build an air pocket that blocks the flow of juice to the atty. if you hold the tank upright and flick it lightly with your finger, you will see bubbles rising to the top. Be careful to only flick it a couple of times or the juice will start running out. Ok, on to the next issue. I noticed some condensation in the tip of the tank, and sometimes you get a little in your mouth. ( DOUBLE YUCK ) if you lightly bite on the mouthpiece, a little plastic piece comes out, throw it away and the problem is solved. I ran 4 tanks through it with no problems at all.

Now for the tidy 10 cartos. So far put of the 5 that I received, 4 have leaked all the juice out of the battery connector. I spoke with the vendor and they are going way above the call of duty. They are sending me 5 more to test. These cartos have a stiff draw, but not unbearable by any means. By the way the tidy 10 will allow using the cap. The tidy 12 will NOT work with the cap.

The battery itself is awesome. Build quality looks good, it's solid and the magnet connection is very handy and works well. I find that the charger seems a little be cheesy and I'm not fond of the pin connection. A micro USB would be much better, but might ruin the look of the device.

The build quality is very good, but it's not a Provari. But my Ford is not a Ferrari either. lol

I hope this helps with any questions.

Awesome review Novcon! Thanks so much for sharing!
 

dragonbone

Vaping Master
ECF Veteran
Verified Member
May 21, 2009
4,104
3,849
Somewhere
how do u guys find the tidy clearomizers. Ive tried two and all u get is the filthy dirty taste! even with decent juice that normally tastes great?

Filthy dirty taste? Yikes that sounds horrible? I hope someone can chime in... (because I don't know). What juice are you using, and are you sure you didn't maybe burn the clearomizers?
 

Optimo

Ultra Member
ECF Veteran
Verified Member
Jul 16, 2011
1,894
787
39
Virginia
Hi all, I just received my Itaste's. I ordered one in black for work with the tank system and one in chameleon for home with the tidy 10 cartos. I have only used these for one day, but I have found some interesting things. First I'll talk about the tank system. I filled the tank, primed the atty with a couple of drops, and was ready. After about 5 or so hits, I started getting a burnt taste and no vapor. The tanks seem to build an air pocket that blocks the flow of juice to the atty. if you hold the tank upright and flick it lightly with your finger, you will see bubbles rising to the top. Be careful to only flick it a couple of times or the juice will start running out. Ok, on to the next issue. I noticed some condensation in the tip of the tank, and sometimes you get a little in your mouth. ( DOUBLE YUCK ) if you lightly bite on the mouthpiece, a little plastic piece comes out, throw it away and the problem is solved. I ran 4 tanks through it with no problems at all.

Now for the tidy 10 cartos. So far put of the 5 that I received, 4 have leaked all the juice out of the battery connector. I spoke with the vendor and they are going way above the call of duty. They are sending me 5 more to test. These cartos have a stiff draw, but not unbearable by any means. By the way the tidy 10 will allow using the cap. The tidy 12 will NOT work with the cap.

The battery itself is awesome. Build quality looks good, it's solid and the magnet connection is very handy and works well. I find that the charger seems a little be cheesy and I'm not fond of the pin connection. A micro USB would be much better, but might ruin the look of the device.

The build quality is very good, but it's not a Provari. But my Ford is not a Ferrari either. lol

I hope this helps with any questions.

Taking hard dry pulls on the tank system solves the juice flow issue. Did you fill the Tidy cartos upside down and force a bit of juice into the wicks? If you fill them upright they won't create a proper air lock and will just leak.
 

dragonbone

Vaping Master
ECF Veteran
Verified Member
May 21, 2009
4,104
3,849
Somewhere
Taking hard dry pulls on the tank system solves the juice flow issue. Did you fill the Tidy cartos upside down and force a bit of juice into the wicks? If you fill them upright they won't create a proper air lock and will just leak.

Hey Optimo! I miss you. Perhaps I must go watch one of your videos again lol...

By the way, since you have SO many devices... which is your current favorite (if you don't mind me asking :))?
 

Optimo

Ultra Member
ECF Veteran
Verified Member
Jul 16, 2011
1,894
787
39
Virginia
Hey Optimo! I miss you. Perhaps I must go watch one of your videos again lol...

By the way, since you have SO many devices... which is your current favorite (if you don't mind me asking :))?

Hey Dragonbone :) The Smoktech VMax is my favorite by far...I'm actually gonna get a stainless steel version through a co-op soon because I love it so much :) along with the Phoenix rebuildable atomizer it takes me to vaping heaven every hit I take lol. If you watch a video check out the Phoenix RA vid. It's the most affordable easiest to use rebuildable that holds about 20 drops and has such clean flavor you won't ever want to vape anything else ever again!
 

dragonbone

Vaping Master
ECF Veteran
Verified Member
May 21, 2009
4,104
3,849
Somewhere
Hey Dragonbone :) The Smoktech VMax is my favorite by far...I'm actually gonna get a stainless steel version through a co-op soon because I love it so much :) along with the Phoenix rebuildable atomizer it takes me to vaping heaven every hit I take lol. If you watch a video check out the Phoenix RA vid. It's the most affordable easiest to use rebuildable that holds about 20 drops and has such clean flavor you won't ever want to vape anything else ever again!
Thanks I will. Rebuildable... hmmm... is it easy or fiddly? I am kind of lazy to struggle to vape. If you know what I mean?
 

Optimo

Ultra Member
ECF Veteran
Verified Member
Jul 16, 2011
1,894
787
39
Virginia
Thanks I will. Rebuildable... hmmm... is it easy or fiddly? I am kind of lazy to struggle to vape. If you know what I mean?

It's alot easier than you think. You simply unscrew 2 little screws and feed one end of the wire through each hole and screw the screws back down and you are ready to vape. Takes about 5 mins to make a wick/coil and put it into place. They sell premade wick/coils also for people that don't want to make them. I actually put 3 coils for a tripple coil setup in this bad boy lol.
 

taka2

Full Member
Verified Member
May 31, 2011
49
24
Japan
To my setup, iTaste white have been added from health cabin.
Its switch is sticking out a little compared to what had until now.

ILSoy
 
Status
Not open for further replies.

Users who are viewing this thread