It's HERE Now! The NEW SMOKtech GotVapes Hyper SRT II RBA Rebuildable Clear Tank 4.0ml - Now in a Complete Package with 3 Extra coil/wick Combos!

[AG51]

I also looked at my SRT spare colored tubes btw from the first model and they appear to be the same size. I'll cut one down to fit this maybe tomorrow and let cha all know if it works good. I still use the old model SRT but I like this one better for taking it apart and the drip tip for sure

 

[yiddleboge6]

I'm with you on loving it's draw and taste I've been vaping this all day since about noon and it hasn't changed one bit, still vaping beautifully. Still no dry hits, still no leaks any wheres, easy to fill. Just plain ole Lovin it !

Does I needs one of dese Mama?

 

[AG51]

Does I needs one of dese Mama?

Yiddle, this one would be very easy I believe for you to replace the wick/coil on with arthuritis. The whole unit comes apart easy enough and I think it wouldn't hurt your hands one bit to be honest. So, yeah if you can swing it, try one

 

[yiddleboge6]

Yiddle, this one would be very easy I believe for you to replace the wick/coil on with arthuritis. The whole unit comes apart easy enough and I think it wouldn't hurt your hands one bit to be honest. So, yeah if you can swing it, try one

kk, off to da shoppin carts I go

 

[AG51]

kk, off to da shoppin carts I go

Gotta lubs them happy Yiddle shoppers

 

[thedub412]

I'm with you on loving it's draw and taste I've been vaping this all day since about noon and it hasn't changed one bit, still vaping beautifully. Still no dry hits, still no leaks any wheres, easy to fill. Just plain ole Lovin it !

You're making me want to start stalking the mailman, at last update, it's at the local facility - especially since it was sent out a day or so ago! I can't wait to try this out (of course, I had to order a splitfire and some new T3 heads too, I can't just put ONE thing in my cart!)

 

[AG51]

Sorry Peoples but I have to confess sumptin here agains

Still using the same wick.....Still....
LOVIN' THIS !

 

[AG51]

I also looked at my SRT spare colored tubes btw from the first model and they appear to be the same size. I'll cut one down to fit this maybe tomorrow and let cha all know if it works good. I still use the old model SRT but I like this one better for taking it apart and the drip tip for sure

Okay, so I was late and didn't try this the other day I sorrys, but.........

I tried it TODAY and it works beautifuls ! I used a pvc pipe cutter (hand held,like the plumbers use) and cut down one of my Hyper SRT replacement tubes. Used this new one as a guide for how long to make it. This is what the Smokey color one looks like on my New Hyper SRT II

View attachment 151695

Only now I gotta get a new SRT II for every color tube I got Oh my werk is never done

 

[yiddleboge6]

Dan, Chris.....................is there more wick coming ?

 

[badkolo]

dan has some wick and mesh to put up

 

[thedub412]

Ok, so I finally had time tonight to get into this guy a bit more. Made an L-shape SS wick (I didn't have time to actually mod the whole RBA, and my dremel decided it was going to bite it yesterday), but, coiled on the original posts with this wick, it's firing at 2.0 ohms and... wow... feels really good - as good as my Phoenix. I could see doing some drips on this guy too, the access to the coil/wick assembly is nice. The drip tip could use some improvement, but otherwise, for the price, this is a solid RBA, and I could see people that are afraid to get into them getting this as an entry level. My huge man hands to have some issues with the spring posts, but I haven't tried the coil/wicks it shipped with. In all honesty, had to replace the original wick due to dry hits with 100% VG juice, but it's a top wicking assembly, I expected it with the stock wick. In other words - good job guys, I dig this thing and approve. I will try to get a vid up of me changing out coils/wicks and how fast it was without tools (yeah, even though I had issues, it was QUICK).

 

[Firewing]

I want one! I want one! I want one *"sounding like Veruka from Willy Wonka and the chocolate factory" *

Sent from my Galaxy Nexus, where the mountains meet the desert in Northern Cali

 

[Plumes.91]

this thing looks great. I don't think its an entry level, i think its an every level. if its made well, then I've got to get one. I'm stuck between getting this thing or a phoenix.

 

[yiddleboge6]

Well................this old gray mare jumped on the bandwagon and got one of these................Let the fun begin!

 

[Sonar505]

A big thank you to chris and dan for bringing me this. I had the original Hyper SRT for the past few months and after tweaking it worked great for me. So was looking forward to this for a very long time after chris mentioned it awhile back. So I took the plunge and ordered one to try out fully expecting to have to tweak it again. When it arrived I checked out the installed wick and coil looked pretty good. Had a few more coil wraps than I usually like and metered out at 2.2 ohms. Decided to see how stock wick and coil do first boy was I pleasantly surprised. A quick dry burn showed all coils heating evenly. removed silicone fill plug and promptly misplaced it so be careful, filled tank and put some juice on wick and coils. Found plug and reinserted. Proceeded to vape fully expecting to have occasional dry hits 2 refills later no dry hits at all. Tried it first tank at 3.7volts 2nd tank at 4.0 volts. Lots of vapor and throat hit. Without having to do anything to it. So it is very much an entry level atomizer. With many option to mod it to your desire. So far I haven't felt the need to try anything with at all. Also I tend to lay mine on the side and have had no,none,nada leaks so loving that to. So if/when the price goes down I will definitely be ordering some more. hint-hint.

 

[AG51]

Glad to hear you're liking it Sonar505

I'm still LOVING mine, use it everyday. Can't wait to order more of these

 

[yiddleboge6]

Introducing the NEW SMOKtech GotVapes Hyper SRT II Rebuildable Clear Tank 4.0ml
$21.95

COMPLETELY NEW DESIGN! First at GotVapes, the NEW Hyper SRT II™ RBA!

• Stylish chrome finish top accepts most 510 drip tips, comes with a clear drip tip.
• NEW easy to change out coil/wick employing brass springs:
  1. Pre hook the end of your coil.
  2. Press down on the spring plate at the top, you don't need to press down too far at all. Use your fingernail or whatever is convenient for you.
  3. Hook your coil in and then release the spring plate.
  4. That easy!
• Clear poly propylene 4ml bottom tank
• Your Hyper SRT package comes with one 2.5ohm precoiled wick and three additional coil/wick combos at low (2.0ohm), regular (2.5) and high (3.0ohm) - all +/- .2ohms

--------------------------------------------------------------------------------
Here is the product description from the original Hyper SRT (much of the same applies)

Introducing the GotVapes Hyper SRT™ II - Self Rebuildable Tank, manufactured by SMOKtech (aka/marketed by SMOKtech as the VIVI Tank).

This is a Genesis style tank atomizer setup that allows you to change wick and coil to your own preference in both material used and coil resistance. The clear PC tube comes off easily (it is best to attach to a battery first and then remove mouthpiece and wiggle tube off) yet provides a good seal with snug gasketing. Once removed you have access to the top portion of the tank (which is separated from the lower juice reservoir by a gasketed metal plate)). Installign coil/wick replacements is made easy with a new spring-loaded system!

The Hyper SRT II comes precoiled and wicked from the factory floor as a courtesy to the builder but the coil is not WARRANTIED in any way as this unit is for the advanced user that should have a good knowledge of building their own coils. Most Tanks of this kind do not include coil or wick, the user is generally required to provide their own. The included coil may not be attached or may be broken, if the user decides to use it they may need to adjust for best performance. Most often that might entail tightening the coil around the wick so that it is making proper contact with the wicking and can then vaporize your juice. The resistance wire that it is installed with is 2.5ohms. You are also provided 3 more coil/wick combos at various resistances.

You can fill through the plate holes where the wickign goes into the juice reservoir or you can turn Your PV upside down and wiggle the tubing down enough to where you can fill with your juice bottle directly (Chris shows this method, which is the easiest and quickest, in the video below - please remember this video centers around the older Hyper SRT, we will have an updated video soon)

NEW SMOKtech GotVapes Hyper SRT II Rebuildable Clear Tank 4.0ml [gv-SMOKtechHyperSRTII] - $21.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

Another goodie for holiday wish lists Even my crippled up old hands can use this one...............and ya gets freakin candy wif da orders!!!!

 

[AG51]

Another goodie for holiday wish lists Even my crippled up old hands can use this one...............and ya gets freakin candy wif da orders!!!!

Just a jolly SWEET smiley you are there Yiddles ! I hopes Santa brings me more of these I really REALLY DO !!! View attachment 154879

 

[doots]

I use mine everyday. love it..

 

[AG51]

I use mine everyday. love it..

I've been using mine everyday too Doots !! Still with the original wick too Have 2 now, and praying Santa sends more my way