The GotVapes TAJ Rebuildable Atomizer 4ml Tank System - Comes with three coil/wick assemblies - From the makers of the Bully Atomizer

Status
Not open for further replies.

yiddleboge6

ECF Guru
ECF Veteran
Verified Member
Apr 25, 2012
16,850
94,508
PA
taj.png


taj_1.png


Special Intro Price

GotVapes TAJ Rebuildable Atomizer tank Kit - 3 Coil Wicks - CLEAR & BLUE
$20.95 $16.95

Inroducing the GotVapes TAJ - A Rebuildable Atomizer Tank System from the makers of the Bully Atomizer.

Also known as the ViVi Rebuildable Tank (not to be confused with the SMOKtech ViVi which is being marketed as the GotVapes Hyper SRT by SMOKtech now or the VISION ViVi Nova). The capacity of the tank is 4ml and the tank ships with 2mm wicks.

You get a complete kit set up. Precoiled onto the system is a 2.4ohm atty and in your box you will also receive 1.8ohm and 2.8ohm coil/wicks. The top mouthpiece is proprietarty, made of aluminum.

This employs the use of a filling rod that seals the lower chamber from the top champer by screwing the knurled rod into a juice port. Unscrew this then use a syringe or our bottle applicator kit.

As with any rebuildable system you will need some time to get used to changing coil and wick but once you have this mastered you will be vaping this like Choo-Choo Charlie :)


  • You will receive ONE CLEAR TAJ Rebuildable Tank System with three coil wick set-ups, one of which is preinstalled for you: 1.8ohm, 2.4ohm and 2.8 ohm.
  • Comes packaged in foam inserts in a box that very much looks like the box used for our ViVi Nova's. On the back of the box full graphics/instructions are included.


bumpity bump :D
 

kelleymcm

Vaping Master
ECF Veteran
Aug 2, 2010
5,204
14,298
oklahoma city
ahhhy vivi's ?? which vivi? the vivi nova or vivi/srt ?

My vivi/SRT is almost too airy, using a cone helps a lot :D
Maybe ?........NO CONE necessary on this one .
I need to order one to SEE for sure now :D

I don't think tight DRAW should be a BIG concern on these,
considering how close they are to SRT's
& there are folks that preferred a different draw on those
& achieved it by plugging original air hole & drilling one in tank .

So I'm guessing that one could get the draw one wanted
by adjusting the size of the drilled hole, If one absolutely HAD TO.

Would be worth it to get that BLUE , IMO :D
 

AG51

ECF Guru
ECF Veteran
Jan 23, 2011
82,919
390,399
Dat Way →
I guess I'm just going to have to get brave enough to try doing my own wicks and coils. This one? Or the Birkshire?
The Berkshire :)


I may be wrong but with arthuritis hands the berkshire comes apart and it'd be easier to get to the coil to do verses trying to pull that tube off ??
 
Last edited:

wolcen

Ultra Member
ECF Veteran
Verified Member
Mar 9, 2011
1,182
1,302
Boston, MA
www.wolcen.com
Like kelley alluded to: the device profile may make a significant difference in draw, so look for comments like penguins: the draw when not connected as well. Any devices with limited clearance at the same level as the connector may have issues. Just mentioning...I dunno why.

Anyway: how about one of these style suckers with an adjustable air screw/valve or similar at the top end??
 

yiddleboge6

ECF Guru
ECF Veteran
Verified Member
Apr 25, 2012
16,850
94,508
PA
taj.png


taj_1.png


Special Intro Price

GotVapes TAJ Rebuildable Atomizer Tank Kit - 3 Coil Wicks - CLEAR & BLUE
$20.95 $16.95

Inroducing the GotVapes TAJ - A Rebuildable Atomizer Tank System from the makers of the Bully Atomizer.

Also known as the ViVi Rebuildable Tank (not to be confused with the SMOKtech ViVi which is being marketed as the GotVapes Hyper SRT by SMOKtech now or the VISION ViVi Nova). The capacity of the tank is 4ml and the tank ships with 2mm wicks.

You get a complete kit set up. Precoiled onto the system is a 2.4ohm atty and in your box you will also receive 1.8ohm and 2.8ohm coil/wicks. The top mouthpiece is proprietarty, made of aluminum.

This employs the use of a filling rod that seals the lower chamber from the top champer by screwing the knurled rod into a juice port. Unscrew this then use a syringe or our bottle applicator kit.

As with any rebuildable system you will need some time to get used to changing coil and wick but once you have this mastered you will be vaping this like Choo-Choo Charlie :)


  • You will receive ONE CLEAR TAJ Rebuildable Tank System with three coil wick set-ups, one of which is preinstalled for you: 1.8ohm, 2.4ohm and 2.8 ohm.
  • Comes packaged in foam inserts in a box that very much looks like the box used for our ViVi Nova's. On the back of the box full graphics/instructions are included.


Bump and bump :laugh:
 

rdsok

ECF Guru
ECF Veteran
Verified Member
Mar 17, 2012
16,213
72,567
Norman, Ok
My replacement coils come with some mesh included in the package. How is this used?

This was posted in another thread but links to the info you need about using ss mesh...

http://www.e-cigarette-forum.com/fo...-systems/339156-calling-all-genisis-pros.html Good tips in here for getting your wick ready and trouble shooting.

http://www.e-cigarette-forum.com/forum/modding-forum/330407-500-ss-mesh.html Very very long thread full of good info, long story short solid tight wick no straw or tube in the middle and the higher the mesh number ie 400 or 500 the better no difference for vg or pg, I'd start with 400 as 500 can get pricey while you are trying to get the wick to work just right.

https://www.youtube.com/watch?v=k2pjHVZlF0M and vid for making a ss mesh wick, you cna use a gas stove in place of the torch.

I'm putting this up because I just went through this process and its a pain if you don't know what you are doing, hope this helps someone!

PS... the info about using 500 mesh may be debatable, I've read a lot of posts saying that 270 or 320 mesh was better for the same reasons mentioned above... doesn't mean the info is wrong, just that others have different opinions on what works best
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread