Kayfun LITE - Part 2

[VapingTurtle]

Think it's the V2 that has two.

@MattB101
The newest original from Svomesto is the KFL Plus second batch. They, and all of the originals, have one airhole. The EHPro Plus v2 and some other clones have 2 air holes.

The two air holes really don't make any difference. The air intake is still limited to the center tube. The draw is the same on both the original and the clones. (Yes, I have an original, an EHPro, and another clown.)

 

[VapingTurtle]

I been using kayfun Lite Plus for 2 months and I'm loving it. I use it with 28g kanthal, but now was thinking to use it with titanium wire for temperature control, any suggestion or recommendation? Are the lite plus good with titanium coil?

The KFLs are very good for TC. They have a very stable connection. Go at it, @Hornsen!

 

[Skitterpop]

I am just waiting for my stainless wire to show up. Going to do my first attempt at temp control on my kayfuns.

 

[Moxienator]

The combo that got me to quit, running strong since August 2014. KFL+ second batch, 22mm full-size generic M tank, SOV micro top cap (filed down chimney), SOV drip tip (v4 I think), SMPL V1 in brass.

Fortune favors the Bottom Feeders.

 

[raitizz]

Backstories, manuals, reviews..

SvoëMesto | Products

R

 

[AndriaD]

The combo that got me to quit, running strong since August 2014. KFL+ second batch, 22mm full-size generic M tank, SOV micro top cap (filed down chimney), SOV drip tip (v4 I think), SMPL V1 in brass.

Fortune favors the Bottom Feeders.

I love the look of those shorter top caps; how much did you have to "file down" the chimney, to get it to work?

Andria

 

[Moxienator]

I love the look of those shorter top caps; how much did you have to "file down" the chimney, to get it to work?

Andria

Thanks! That top cap makes the whole thing so much lighter, with minimal loss of capacity if any. The stock chimney came up through the drip tip hole, and would fit a drip tip with around a 6mm or so bore. Instead, I filed/ sanded it down about 2mm or so until it was flush so that almost any drip tip will work. The reason I say almost is because the pocket isnt as deep as most 510 drip tip pockets. However, most tips will fit. A router drip tip, for example, fits nicely. The SOV tips also. Some of my cheapo delrins don't quite seat fully however.

Fortune favors the Bottom Feeders.

 

[Moxienator]

Not sure what a stock chimney is, but I finally measured my "custom" one at 11/16ths.

Fortune favors the Bottom Feeders.

 

[Woofer]

It is so nice to see this thread getting active again. Ya can't beat a Kayfun with a subohm tank, well you can but you will break it. KFFTW

 

[Moxienator]

Attysmith Hellfire Titanium Whistle tip fits perfectly as well. This one is staying put. Definitely a winning combo.

Fortune favors the Bottom Feeders.

 

[hittman]

I just got another kfl+ a couple days ago. These are the best working tanks that I've used so far. I'm not really into sub ohming very much. This one makes four kfl's for me and might get some more for back ups.

 

[Bronze]

Every tank is a Kayfun variation.

 

[TrollDragon]

Every tank is a Kayfun variation.

This should be the mantra of the KFL thread.

 

[Bronze]

There are lots of people who want to criticize the Kayfun. I guess when you're king of the hill there will be those who want to knock you down. And as they try, they are vaping from a tank that uses the Kayfun design concepts.

 

[AndriaD]

There are lots of people who want to criticize the Kayfun. I guess when you're king of the hill there will be those who want to knock you down. And as they try, they are vaping from a tank that uses the Kayfun design concepts.

The criticism I don't get *at all* is the kayfun having "too tight a draw". I have to close it down almost completely just to get a decent MtL hit from it!

Andria

 

[Bronze]

The criticism I don't get *at all* is the kayfun having "too tight a draw". I have to close it down almost completely just to get a decent MtL hit from it!

Andria

I understand the airflow issue. There are some people who just like a lot of airflow....more than the Kayfun provides.

 

[Aal_]

There are lots of people who want to criticize the Kayfun. I guess when you're king of the hill there will be those who want to knock you down. And as they try, they are vaping from a tank that uses the Kayfun design concepts.

But the kayfun design is not its own as well .

 

[JJOOHHNN]

I guess i can drop some Kayfun Lite pix.... some place here. My 1st Lites.. Long mode, ss 22mm mode & oem m-tank. View attachment 400350
Build pix micro coil. View attachment 400351View attachment 400352View attachment 400353 Still rocking 2 Kayfun lites every day.

I have been trying to find someone who has one in long mode to ask how it vapes and if there are any particular problems long mode creates besides being big? How well does long mode work out as a vaping tool?

 

[Moxienator]

I have been trying to find someone who has one in long mode to ask how it vapes and if there are any particular problems long mode creates besides being big? How well does long mode work out as a vaping tool?

I have the tank and chimney for long mode, but have yet to try it out. I did just pick up a gizmo though, so I may try it. If I do, I'll lost some feedback.

Fortune favors the Bottom Feeders.

 

[madangus]

Do any of you use rayon or readywick, any of those longer lasting wick options? The cotton is fine but it would be nice to have something that could go amcouple of months like a coil..