Kayfun lite plus v2

[Docbrown121]

So I ordered the kfl+ and now the waiting game starts. I was wondering what pro ring looks the best with it. Since I'm going from a Smoktech PBC V2 to the kfl+, is that like going from a ego to the provari? Thanks in advance for the suggestions.

Sent from my SCH-I545 using Tapatalk

 

[rastapete69]

I'd say you made a major upgrade.
Personally, I'm very happy with my Tatroe cone and like that it's in stock.

Sure, the hippo rings are nice if you don't mind paying the same for a ring as a decent mech

 

[Moodyfisherman]

Congrats....ditto on getting a ring.

Got in on the Vaperev svoemesto kayfun Lite Plus V2 (1st batch) as they call it .....been on the email list for months and got one ordered early last week......In Oregon yesterday so Monday will be upping my game from rebuilding Protank coils to the big boy topper...yee haw

 

[Docbrown121]

So I've been looking in to rings for it, and are the Provari mini and the full size the same in diameter? I saw that the Loki labs ring looks nice with it, but 20 bucks for a piece of metal. Seems a little steep for what it is.

 

[Train2]

Here's the "everything about rings" thread!
They tend to run $20, there are a couple that cost less, and some that cost more...
The diameter is the same Mini or Standard ProVari - about 23mm. So with a 22mm topper, you get a tiny bit of a "shelf".
The "Kayfun Cone" has a very slight taper - 23 to 22 - for a smooth transition, but there aren't any available in the U.S. - you'd have to order from the UK or something...

 

[Docbrown121]

Here's the "everything about rings" thread!
They tend to run $20, there are a couple that cost less, and some that cost more...
The diameter is the same Mini or Standard ProVari - about 23mm. So with a 22mm topper, you get a tiny bit of a "shelf".
The "Kayfun Cone" has a very slight taper - 23 to 22 - for a smooth transition, but there aren't any available in the U.S. - you'd have to order from the UK or something...

I don't know how I missed that. Looks like I'm gonna go with the Loki Labs ring. Thanks everyone.

 

[lansens]

Loki ring is nice, I would recommend it.

Has any one noticed poor quality with the clear center tank? Threads aren't great and residual plastic left on the inside.

 

[BadTrainDriver]

Loki ring is nice, I would recommend it.

Has any one noticed poor quality with the clear center tank? Threads aren't great and residual plastic left on the inside.

I hope not. I'm still waiting on mine. Should be here Friday. I'll report back when I get them.

 

[Ozwald]

I hope not. I'm still waiting on mine. Should be here Friday. I'll report back when I get them.

I haven't gotten a new halftank in a bit (got a few of them maybe a month ago), but I never had a problem with bad threads. A tiny bit of plastic left over from the molding process, but it comes right out. I pretty much expected it considering the price.

 

[lansens]

Another thing I've noticed that annoys the crap out of me, the clear center tank has two seams opposite the other. My friggin clone made in China is better quality. With that said, the V2 is a pleasure and I very happy with it.

 

[SeniorBoy]

Loki ring is nice, I would recommend it.

Has any one noticed poor quality with the clear center tank? Threads aren't great and residual plastic left on the inside.

The real deal KFL + V2 from vaperev.com: Happened last night. Horrible. No way to fix it and I was very very carefull when I cleaned and assembled it. Plenty of residual plastic left and the threads leave a lot to be desired. Farewell plastic center tank.

EDIT: I would like to use a tall frosted M tank but I'm concerned with the quality. I see them all over the place but I guess my experience makes me cautious. Source?

 

[Kn0ttYFive]

The Kayfun tanks from GR-Modders are of better quality IMHO, and are truly clear and not Polycarbonate, I think is made from "PMMA, Acrylic glass"

 

[Steamer861]

I have a 2 rings 1 from loki lab and 1 from cloud9 (original Svoemesto) the Svoemesto is a lot nicer the loki lab one is thin and cheap looking

 

[VapinBill]

Mine just came in. Vapes like a champ.

 

[Docbrown121]

Very nice I get mine on Friday. Iz excited.

Sent from my SCH-I545 using Tapatalk

 

[SeniorBoy]

The Kayfun tanks from GR-Modders are of better quality IMHO, and are truly clear and not Polycarbonate, I think is made from "PMMA, Acrylic glass"

WOW! Thank you so very much. I always get confused on this issue so if you could please confirm my pending purchase. I have a KFL + V2 see pic:



If I wish to replace the 3 parts noted with red lines with a full sized tank then I order: Kayfun 3.1 and Lite Large Clear Tank by Kir Fanis - Gr-Modders

If I only wish to use a clear window in the middle then I ortder: Kayfun lite clear windows by Kir Fanis - Gr-Modders

Thanks in advance for your help.

 

[lansens]

For the amount of money paid for the tank I'm still pretty steamed about the quality. Was it rushed to get it out before the restock on clones? I just don't get it. Please don't read this as a negative, its not. I love the performance.

 

[Kn0ttYFive]

WOW! Thank you so very much. I always get confused on this issue so if you could please confirm my pending purchase. I have a KFL + V2 see pic:

View attachment 310221

If I wish to replace the 3 parts noted with red lines with a full sized tank then I order: Kayfun 3.1 and Lite Large Clear Tank by Kir Fanis - Gr-Modders

If I only wish to use a clear window in the middle then I ortder: Kayfun lite clear windows by Kir Fanis - Gr-Modders

Thanks in advance for your help.

Yes, that is correct.

 

[diamondlvr]

I just got my KFL+ today and noticed a small bit of plastic on the plastic tank that I had to scrape off with my fingernail. Seems I'm not the only one. I didn't have a problem attaching it though.

Sent from my VS980 4G using Tapatalk

 

[SeniorBoy]

Yes, that is correct.

Much thanks. I'm off to Bulgaria of all places for this. Sometimes I just have to scratch my head and wounder why no one else can make good stuff. eh?

New owner @diamond above. Vape with your new toy and then take it apart and see what that plastic piece of dung manure looks like after it's been in a vacuum with 5 or 10MLs and under pressure.