Maybe it was cloud9 where the VAT was removed for Canada, and not for the US?
- Status
I couldn't agree more. I'm retired and living on a fixed income, but my bt804s (early kayfun clone) give me a great vape that suits me better than anything else I've tried. If I was still working I'd have a couple of the originals as well, just for the satisfaction of owning a high quality unit.
As far as clones hurting the original sales, I think it's just the opposite. Folks that can afford it will pick up the original just for the quality. Nothing wrong with that either imo, like I said, I'd do the same if I was working.
It will fit. There are many different types of nano kits.
Team rampage
Science of vaping
Ultravaping
I got mine from abc vaping, worked great on my black edition. I did have to work the treads a little where it attaches to the base but once they were worked out everything is smooth and fits great.
Kayfun Lite with a "purple" nano tank. I got this from http://www.ultravaping.com/ today. Removed my TR nano tank kit. This is a solid tube 22mm, hold more fluid since it does not have threading in the middle of the tube (x2). I am super happy with this 12 $ purple bling, matches the Sidewinder well. GVC in the tank, vaping bliss on a Saturday.
Going to get the blue n black tanks next.. Love my Kayfun Lite more every day, is that possible?
90.00 shipped st Mt baker for the Russian 91%
sent from my Limited Edition Monkey Island Talking Voodoo Doll Head named Murray®
Again, the Russian 91% is in stock at Mt baker. With the 10% odd coupon it is 90.00 shipped. Also, drop them an email and ask them to carry the rebuild kit for it.
http://www.mtbakervapor.com/advanced-e-cigs/the-russian-91/
Coupon code ECF for 10% off. Free shipping over 50.00 and I believe you can request a 15ml sample for orders over 15.00 in the comments when you place your order.
This is their second restock, last time they were only out of stock for about a week.
sent from my Limited Edition Monkey Island Talking Voodoo Doll Head named Murray®
Last edited:
ordered. Thanks.
I got my current r91 at vaporkings and got it in 2 days with free shipping since the stores located in Oklahoma and im in Texas. But oh well saving $2.50 = Worth it.
Usually if I order from mbv on a Friday, it is in my box Monday evening. I am in South Carolina so it should get there pretty fast with just the regular shipping..
sent from my Limited Edition Monkey Island Talking Voodoo Doll Head named Murray®
Every site does.
I got two from InTaste and two from VapeRev. Discussed with Keith & Lisa for my first K-Lite from C9V, but dropped the idea since it was pricier than the others.
Can anyone help me with my kayfun mini? All of a sudden it is leaking like a mad. When I fill it it is like it is dumping straight out of the drip tip. It makes me think there is an oring missing at the top cap. I have looked for a picture of the mini to try an see if there is suppose to be an o ring up there but can not find anything.
Is there suppose to be an o ring up between the end of the chimney top the top cap and the drip tip? If so what size?
Thanks for any help. I love my mini and am getting .......
Is there suppose to be an o ring up between the end of the chimney top the top cap and the drip tip? If so what size?
Thanks for any help. I love my mini and am getting .......
Do check your o-rings first...but I think I know what's happening, because it happened to me.
When you start to squeeze your juice through the fill port, the hole for the juice to enter the tank is very close to the holes that let juice into the chimney (wick holes). Since there is not much space between the chimney and the inner wall of the tank, the juice wants to spread out and go into the wick holes, into the chimney, and right into your hand! I have to fill mine pretty slowly to not have it happen.
I want share something I discovered last night when I was setting up a new Kayfun Lite Plus clone for the first time. After I had wound the coil, installed wick and put the tank together, I wondered was this new tank sealed up air tight? After a little thought, I figured out how to do a simple "vacuum" test on it before filling it with juice.
All you have to do is put your finger over the air intake hole and do a real hard draw on the drip tip. When you feel the suction build up and you can no longer draw any air from the tank, put you tongue over the end of the drip tip to seal the vacuum in the tank. If it is sealed up properly, it will hold the vacuum you created when you took the draw on it. If it will not hold this vacuum, you have a leak somewhere and need to correct it before filling with juice.
All you have to do is put your finger over the air intake hole and do a real hard draw on the drip tip. When you feel the suction build up and you can no longer draw any air from the tank, put you tongue over the end of the drip tip to seal the vacuum in the tank. If it is sealed up properly, it will hold the vacuum you created when you took the draw on it. If it will not hold this vacuum, you have a leak somewhere and need to correct it before filling with juice.
Great tip...I'm going to figure out how to do this also in my tanks in which I use a Diver or a Sophia. They are very sensitive to tank pressure integrity...now, just to figure out how to get a good seal on the 510 air holes...
- Status
Similar threads
