- Status
Well, when the big one drops on us, the only things that will remain are cockroaches and mechs. So there is something to be said about them.
Well, when the big one drops on us, the only things that will remain are cockroaches and mechs. So there is something to be said about them.
When the big one drops it won't matter anyway
That's what I was trying to say to Diver with his electromagnetic pulse attack.
If the big one drops on us in my lifetime, I'm gonna look in the sky and try to stand where I think it's gonna land. I don't want to be around for the carnage.
And on to other topics....
That's what I was trying to say to Diver with his electromagnetic pulse attack.
If the big one drops on us in my lifetime, I'm gonna look in the sky and try to stand where I think it's gonna land. I don't want to be around for the carnage.
And on to other topics....
Such an uplifting thought.
When I come back I want to be a mammogram machine
LOL. I can't say what I wanna come back as.
That was the most publicly acceptable thought I had
And the nicest thing about the kayfun lite one you learn how to use it is, you can appreciate your own obsolescence. Its jolly cracker time.
Oh, and dude with the Kayfun V2 that was getting a chalk taste from vaping,,,,, Leave the tank overnight to let the wick break in with juice in the tank, I did that and then had no chalk taste, this was on my EH Pro, pretty good vape as Kayfuns go. I have had no luck top filling these tho, its like they get the measles when you try. Also probably better off with about a 2 mm wind and less wick if your higher than that by much, since that is the wick i let soak, that is the one i recommend. These V2's are the first Kayfuns I have found that are a tad fussy. Of course there are lots of fussy RBA's out there and time is money. But the vape quality is excellent on the V2 (if you let the wick break in.) You kind of have to be patient with it, like with an obstinate person. Also the vape quality is more on par IMO with the Kayfun 3.1 which I love, and less with the lite plus which is a slighly stronger harsher vape. <<< Which I love too.
Oh, and dude with the Kayfun V2 that was getting a chalk taste from vaping,,,,, Leave the tank overnight to let the wick break in with juice in the tank, I did that and then had no chalk taste, this was on my EH Pro, pretty good vape as Kayfuns go. I have had no luck top filling these tho, its like they get the measles when you try. Also probably better off with about a 2 mm wind and less wick if your higher than that by much, since that is the wick i let soak, that is the one i recommend. These V2's are the first Kayfuns I have found that are a tad fussy. Of course there are lots of fussy RBA's out there and time is money. But the vape quality is excellent on the V2 (if you let the wick break in.) You kind of have to be patient with it, like with an obstinate person. Also the vape quality is more on par IMO with the Kayfun 3.1 which I love, and less with the lite plus which is a slighly stronger harsher vape. <<< Which I love too.
I too have found that the lite + is harsher and easier to flood if toop filled. and for the life of me I cant' figure out why! The only real difference I can find is that the top cap of the chimney is not coned inside like most of the others.
This may or may not be the reason for the harsher hit. But why the difference in top fill flooding, I'll be darned if I know!
KnifeMaker
This may or may not be the reason for the harsher hit. But why the difference in top fill flooding, I'll be darned if I know!
KnifeMaker
It's like anything else, you have to get used to them, have a decent mod, and know how to set them up. I own a few mech but none are clones. I can set one up with my usual .4 ohm set up and no heat what so ever. I know everyone is different, some hate vv devices, some hate mechs, while some like both. I do however feel that a mech is the long lasting work horse because there is nothing that can go wrong with them, so imo their the house movers. what happened to your provari? like I said I love all types but tbh, if I could only keep one, it would be my v2 polished provari. what would be the absolute ultimate would be a provari dna 30 that can handle resistances to let's say .4ohms. This would be sweet
Sent from my SCH-I545 using Tapatalk
Ehhh not gonna say how; but let's say it still works which is amazing unto itself. Lol
But the screen cover broke and it's under warranty. So I'm going to take advantage rather than fix it myself. Let the swap it out.
I considered fixing it on my own. Like I said though. I'll let then do it while the warranty is still good. She shouldn't have survived at all though. Proved to me why I need to get another one. Damn things really are invincible like everyone says.
You ain't kidding. Some have thought the provaris are over rated and over priced but after owning one for almost 3 years, I must say they are the very best vv devices out there period.
Sent from my SCH-I545 using Tapatalk
And LOL (on me!)
How can you guys be wrong! It indeed was/is Nichrome. I had totally forgotten that I had bought some from InTaste as they didn't have 28g Kanthal that time.
So, made of Nichrome but is rocking on 21W! As always, thank you folks ~ and thanks my K'funs, to keep me vaping happily since they happened to me in 2012!
Could be a variety of causes. One could be a pressure issue caused by a bad seal. a bad seal can be missing, worn, or improperly positioned orings. Also it could be cross threaded plastic tank or cracked tank. If the device is ok then it could be things like, to low of a coil, to thick of a wick, to long of wick, wick blocking channels. Also not enough power to coils causing coils to not vaporizer all juice . Also temperature changes can cause this as well. I'm sure there are even more but can't think of any right now. sorry there is not a specific answer I can give you because it really can be alot of reasons. good luck
Sent from my SCH-I545 using Tapatalk
And LOL (on me!)
How can you guys be wrong! It indeed was/is Nichrome. I had totally forgotten that I had bought some from InTaste as they didn't have 28g Kanthal that time.
View attachment 350178
So, made of Nichrome but is rocking on 21W! As always, thank you folks ~ and thanks my K'funs, to keep me vaping happily since they happened to me in 2012!
I have some nichrome lurking in my bone box too. I should fish it out of there and put it some place where I'll never run across it. Like then laundry room.
I don't say it too often outside of threads where people have bought one; but, my first vape on it was like listening to Neal Pert do a drum solo for the first time.
I hadn't tried one before I bought it, I would never do that; the only reason I did was I knew I wouldn't lose any money on it. Since I've had it I've tried several devices - Hana-Hans mini- mechs- you name it. I've become good friends with a few vape shop owners here now; so I do get the advantage of a test drive here an there. To me, I don't care what anyone says, for the way I vape- it is the BEST thing out there. The fact that it still worked after I did what I did to it - just proves it's value.
Looking for all the o-rings and tiny washers for air hole and fill hole screws. FatDaddys Ebay offering is not for the EHPRO KFL+ clone which I have. It also does not include the tiny washers for the fill hole and airhole screw.
Any links as to where I can grab these much needed parts. I am off the Loews to check there.
Thank you,
Any links as to where I can grab these much needed parts. I am off the Loews to check there.
Thank you,
I too have found that the lite + is harsher and easier to flood if toop filled. and for the life of me I cant' figure out why! The only real difference I can find is that the top cap of the chimney is not coned inside like most of the others.
This may or may not be the reason for the harsher hit. But why the difference in top fill flooding, I'll be darned if I know!
KnifeMaker
It just has to do with vacuum pressure. You simply cannot get the proper vacuum within the chamber by threading the top cap, turning it upside down, finishing the threading of the top cap all with your finger over the airhole(s) while jumping up and down and patting the top of your head and rubbing your belly.
The best way to achieve the solid solid vacuum pressure is to seal it 100% tight and syringe it through the fill hole. Jumping up and down patting your head and rubbing your belly at the same time is also helps.
Last edited:
- Status
Similar threads
