- Status
From what I know, Vaperev is the only authorized US vendor for svoemesto stuff. I could be wrong though.
It's all about the vape my friend. See my earlier note about my "juicy" vape. I'm not complaining.. the flavour is HUMONGOUS!! I almost went through the whole tank during my work day.. and I don't vape at my desk.
Once out - every vendor will carry them, V-Rev, InTaste, C9V et all. But the question is ~ Do it need one? -No. Will I get one? -
It's all about the vape my friend. See my earlier note about my "juicy" vape. I'm not complaining.. the flavour is HUMONGOUS!! I almost went through the whole tank during my work day.. and I don't vape at my desk.
ya i get you. the flavor of the vape is sooo much better than when i was using using ekowool and a regular coil build. im not complaining either, but i already know she is gonna be saying "youre out of juice AGAIN! YOU ARE VAPING TOO MUCH!" when in reality im just getting a better vape now. im easily going through 5ml a day now. but as long as i stay away from the cigs thats all i want
Once out - every vendor will carry them, V-Rev, InTaste, C9V et all. But the question is ~ Do it need one? -No. Will I get one? -
I won't.. the K-Lite is perfect for me the way it is. There! I said it.. again!
Idon't have KayFun Lite yet but I got the next best thing in vapemail from VapeRev, which is its Drip Tip !! lol No seriously, i really am enjoying the KFL's drip tip and it's not too shabby on my standard sized laser slotted boges.
RHP
RHP
yeah man, after getting the svoemesto driptip I'm the same way too, now I think I want one on all my mods really like the way it feels and I really like the small inlet hole to keep foreign matter out of my driptip
really like the way it feels and I really like the small inlet hole to keep foreign matter out of my driptip 
I won't.. the K-Lite is perfect for me the way it is. There! I said it.. again!
I'm thinking the current trio will hold me over
Lol this obviously was posted in the wrong thread..oops
But I'll field the questions.....all the way at the top!!! I've tried just about every RDA out there and the performance &a flavor is top notch. It's got all the functions that make it a top performer plus a few extras. It's a little tedious to build on but well worth it.
It has two independent juice wells for dual coils and holds a tons of juice (30-40 drops). I'm currently running dual coils (.04 ohms) and it's producing fantastic flavor and vapor. I'm using TPR Banana Pudding
Sent from my Third Eye using Tapatalk
Ok I have to correct my feeling about tanks. Not all tanks, just the Kayfun. I have tried most every tank out there and every single one of them muted my juice, or I tasted tons of silica. I stopped into my local B&M and was able to try a Kayfun lite. It was just as flavorful as dripping. I bought it, went home and built a nano coil with 30awg at 1.9 ohms and cotton wick. Filled it up with some Suicide Bunny Derailed and it is just marvelous. 
Ok I have to correct my feeling about tanks. Not all tanks, just the Kayfun. I have tried most every tank out there and every single one of them muted my juice, or I tasted tons of silica. I stopped into my local B&M and was able to try a Kayfun lite. It was just as flavorful as dripping. I bought it, went home and built a nano coil with 30awg at 1.9 ohms and cotton wick. Filled it up with some Suicide Bunny Derailed and it is just marvelous.
Yep, that's the beauty of the Kayfun. Dripping quality with large tank capacity.
I mirror polished the section under the air holes to tie in the polished deco top cap and break up the brushed section. Looser draw than my KFL, flavor and clouds of a dripper. Aqua's insulators laugh at .2ohms. My KFL is getting jealous. Aqua build dual 7/8 wrap 24g Kanthal 2mm EW @ .3ohms. I need to get 26g A-1 annealed Kanthal now.
Last edited:
Once out - every vendor will carry them, V-Rev, InTaste, C9V et all. But the question is ~ Do it need one? -No. Will I get one? -
I doubt I'll get one. I like the KfL the way they are. I already have 5 of them.
FYI to anyone having dryness and wick burning with builds that seemed to work before; check your o rings. 3 of my o rings, base, top cap and chimney o rings where 2mm over sized after almost 2 months of regular wear and tear without using liquids that bust plastic and o rings. I used my spares and all is good with the world again! Sad thing is I chucked my twisted micro coil/mesh build because I thouth it was not running good by design. I still have the coil though so I will have to revisit it when I get some more downtime. For now I'm sticking with my trusty 1.6 ohm micro build with cotton.
Once out - every vendor will carry them, V-Rev, InTaste, C9V et all. But the question is ~ Do it need one? -No. Will I get one? -
As an avid fan of the KFL, the upgrades on the KFL+ are HUGE in my opinion, making it a must.
The only two problems I had with my KFL was leaking from the fill screw, which I pretty much fixed myself, and the fact that some of my thicker juices tasted better when I ghetto-rigged a tiny piece of rolled SS mesh into the air hole to tighten it up a bit. I thought these modifications were worth the effort since the device is otherwise the best vape I've ever had.
Airflow is key, and with the two modifications on the KFL+ this atomizer will, in theory, be 99.99% perfect in my humble opinion. All the features of the jumbo 3.1s in a smaller leak-free package.
And thx Qorax
Sent from my hand-computer using Tapatalk 2
Last edited:
Hmm. Now I'm wondering if the insulators are affecting the seals as well. Still got a hint of dryness and burning towards the end of my nightly vape session a few moments ago. When I was inspecting the o rings I noticed a bit of juice was down below in the the center pin, I'm assuming from the floodings I've gotten, the curious part was that there was a bit of juice staining around the screw head of the center pin on the bottom of the 510 connection. I can't see how juice got down there to stain that area unless the bottom insulator was wonky as well.
- Status
Similar threads
